SmallRig RC 350D COB Daylight LED Video Monolight User Manual
- June 9, 2024
- SmallRig
Table of Contents
SmallRig RC 350D COB Daylight LED Video Monolight
Warnings
- Please read this User Manual carefully.
- Keep this User Manual and always include it when passing the product onto the third party.
- Heed all warnings and follow all instructions in this User Manual.
- Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.
- Care must be taken as burns can occur from touching hot surfaces.
- Do not operate the fixture if a cord is damaged or if the fixture has been dropped or damaged until it has been examined by qualified service personnel.
- Position any power cables so that they will not be tripped over, pulled or put into contact with hot surfaces.
- If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used. Cords rated for less amperage than the fixture may overheat.
- Always unplug the lighting fixture from the electrical outlet before cleaning and servicing or when not in use. Never yank the cord to remove the plug from the outlet.
- Let the lighting fixture cool completely before storing.
- To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids.
- To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact smallrig@smallrig.com or take it to qualified service personnel when service or repair work is required.
- The use of an accessory attachment not recommended by the manufacturer may increase the risk of fire, electric shock, or injury to any person operating the fixture.
- Power this fixture by connecting it to a grounded outlet.
- Please remove the protection cover before powering the light.
- Please remove the ‘EVA protection cover before using the reflector.
- Please do not block the ventilation and do not lcx:>k at the light directly when it is powered on.
- Please do not place the LED lighting fixture near any liquids or other flammable objects.
- Only use a dry microfiber cloth to clean the product.
- Please have the product checked by an authorized service personnel agent if your product has a problem.
- The malfunctions caused by unauthorized disassembly are not covered under the warranty.
- We recommend only using the original Small Rig cable accessories. Please note that our warranty for this product does not apply to any repairs required due to any malfunctions of unauthorized SmallRig accessories, although you may request such repairs for a fee.
- This product is certified by CE, RoHS, UKCA, FCC, IC, KC, RCM, TELEC, PSE. Please operate the product in full compliance with the operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you may request such repairs on a chargeable basis.
- The instructions and information in this manual are based on thorough, controlled company testing procedures. Further notice will not be given if the design or specifications change.
In the Box
When you unbox the product, please make sure all the items below are included.
Otherwise, contact with the seller immediately.
Product Details
Installations
-
Attaching/ Detaching the protection cover
Push the handle of the lever in th.e direction of the arrow shown in the picture, and rotate the cover to pull it out. Reverse rotation will put into the protection cover.
-
Installation and removal of the reflector
Push the lever handle according to the arrow direction shown in the picture and rotate the reflector into it. Rotating in the opposite direction pulls out the reflector.
-
Setting up the light
Connect and tighten the stand adapter with the light through the Arca-type clamp and mount plate, rotate the tie-down knob to fix the stand adapter on the light stand.
Please remember to lock the stand adapter with the locking handle once you’ve adjusted the light to the required angle.
-
Soft light umbrella installation
Insert the soft light handle into the hole and lock the knob on the hole .
The Power Supply
Notice: Please press the spring-loaded lock button on the power cord to remove the cord. Do not pull it out forcibly.
Operations
-
Press the power button to turn the light on and off.
-
Manual control
-
Brightness adjustment
Rotate the INT adjusting knob to adjust the brightness with 1 % variable and the brightness change range is 0 ~ 100%, the change of the brightness will be displayed in real time on the light body.
-
FX and FRO adjusting control
* **a.** Press the FX button to get Normal and Paparazzi/WI Fault Bulb/ Lightning/ Breath/ Party/ Flash/ Flame/ Firework, nine kinds of FX.
* **b.** Rotate the FRO knob then switch to the frequency adjustment, the change range is 1 ~ 1 D.-
BLE reset
-
Long press the Reset button for 3 seconds, the BLE icon will appear in the upper right if the LCD display. The icon flashes 6 times and the BLE is reset
-
Then you can reconnect the light through SmallGoGo App on your smart device.
-
App control
The user can download the SmallGoGo App and connect the the device named 350D- xxxxxx I 450D-xxxxxx. After the light is controlled by the App, the BLE icon will be displayed on the upper right of the light LCD.
Notice: Please enable the mobile location function when using the App. -
OTA mode
Firmware updates can be updated on line via the SmallGoGo App for OTA updates. -
Using the SmallGoGo App
You can download the SmallGoGo App from the iOS App or Google Play Store for enhancing the functionality of the light. Please visit www.smallgogo.com for more details regarding how to use the app to control your lights. -
Panel control
- a. Connect the control panel with the light.
- b. The operation interface is the same as that on the light.
Notice: The control panel is not standard configuration and need to buy separately.
Specifications
RC-350D
RC-450D
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (l)This device may not cause harmful
interference.
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipmet has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates.uses and
can radiate radio frequency energy, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try reorient or relocate the
receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet in a different circuit than the receiver is connected to.
- Consult the dealer or an experienced radio/ 1Vtechnician for help.
RF Warning Statement
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
English: This device contains licence-exempt transmitter(s) / receiver(s)
that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
IC: 27649-3960LEQI
RF Exposure
The device has been evaluated to meet general RF exposure requirement. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body
Guarantee Card
Service Warranty
Please keep your original receipt and guarantee card.Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.
After-sale warranty terms
- 7 Days DOA Return Policy Within 7 days from the date of the package receipt, return or replacement can be done if the item received is malfunctioning or physical damaged (not caused by human abused), return shipping cost will be on SmallRig’s charge.
- 1-Year Warranty Within 1 -year from the date of the package receipt, defective product which is not caused by human abused is eligible to get repair/ replacement for free; defective product which is caused by human abused, repair/ replacement will be charged based on the damage level.
This warranty does not cover.
- Defect caused by users’ violation of the “Warnings”.
- The product identification or SN label is removed or defaced in any way.
- The product is serviced or repaired by any one other than our company or the service agency authorized by our company.
Manufacturer. Shenzhen Leqi Network Technology Co., Ltd. Add: Rooms
103,501 and 601, Building 5, Fenghe Industrial Park,
Nos. 1301-50 Guanguang Road, Longhua District, Shenzhen, Guangdong,
China.
www.smallrig.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>