SHARPER IMAGE 4 Lithium Mini Chainsaw User Manual

SHARPER IMAGE 4 Lithium Mini Chainsaw

General safety rules

Warning!
Reading instructions

1. Workplace

   • Keep the workplace clean and bright. Chaos and darkness can lead to accidents.
   • Do not operate electric tools in explosive environment such as flammable liquid, gas or dust. Electric Sparks from tools can Ignite dust or gas.
   • Let the children and bystanders leave and manipulate the power tools. The outside will let you relax your control

2. Electrical safety

   • The plug of electric tool must match the socket. Never modify the plug in any way.
   • Avoid human contact with grounded surfaces such as pipes, fins and refrigerators. If your body is grounded, it will increase contact Electrical hazard.
   • Do not expose power tools to rain or humidity. Water entering electric tools will increase the risk of electric shock Insurance.
   • Do not abuse wires. Never use wires to carry and pull power Looi\ or pull out their plugs. Let electricity start Keep away from heat, oil, sharp edges or moving parts. Damaged or twisted wires increase the risk of electric shock.
   • When using electric tools outdoors, use external wires suitable for outdoor use. Suitable for outdoor use Wires will reduce the risk of electric shock.

3. Personal safety

   • Keep alert when operating power tools, pay attention Lo the operation and keep awake. Don’t be tired, When operating power tools in response to drugs, alcohol or treatment,
     distraction during the operation of power tools can cause Cause serious personal injury

   • Use safety devices. Always wear goggles. Safety devices such as dust mask under appropriate conditions Anti slip safety shoes, helmet, hearing protection and other devices can reduce personal injury.

   • Avoid sudden starting. Make sure that the switch is in the off position when inserting the plug or battery pack, and put your finger on the Inserting a plug on the switch that is s
     witched on or when the switch is on can cause danger

   • Remove all adjusting keys or spanners left on the rotating parts of the electric tool before the power tool is connected The wrench or key on can cause personal injury.

   • Don’t stretch your hands too long. Always pt1y attention to your feet and body balance. In case of accidents, it can be very good Control power tools.

   • Dress properly. Don’t wear loose clothes or accessories to keep your hair, clothes and sleeve! away from transportation Moving parts. Loose clothing, accessories or long h«ir may get involved in moving parts.

   • If devices are provided for connection with chip removal device and dust collection
     equipment, make sure they are connected well and make sure that they are connrcted well Properly used, these devices reduce the risk of debris.

4. Use and precautions of electric tools

   • Don’t abuse power tools. Use the right power tools according to the purpose and select the appropriate design rating Power tools will make you work more efficiently and safely.

   • If the switch can not turn on or turn off the power supply of the tool, the power tool cannot be used Controlled power tools are dangerous and must be repaired.

   • Before any adjustment, replacement of accessories or storage of power tools, plug and
     or disconnect the battery box from the power supply. This protective measure will reduce the risk of sudden starting of electric tools

   • Store idle power tools out oft he reach of children and do not let people who are not familiar with power tools or do not understand these instructions to operate them. Power tools are dangerous in the hands of untrained users.

   • Maintain electric tools. Check the installation deviation or jamming of moving parts, damage of parts and other conditions affecting the operation of electric tools. If there Is any damage, the electric tools must be repaired before use. Many accidents are caused by poorly maintained power tools.

   • Keep cutting tools sharp and clean. The maintenance is good

   • The use of power tools, accessories and tool tips in a manner consistent with the instruction manual and the requirements of the particular type of electric tool to be used, taking into account the operating conditions and the work to be carried out, the use of power tools for operations that do not meet the requirements may result in hazardous situations

5. Use and precautions of battery tools

   • Make sure that the switch Is disconnected before inserting the battery box. Inserting the battery box into the powertool with the switch on state will cause an accident.

   • Charge only with the charger specified by the manufacturer. There is a fire hazard when using a charger suitable for one type or battery box to another.

   • Only use power tools with special battery box. Use of other battery boxes may cause
     damage and fire hazard

   • When the battery box is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws or other small metal objects, so as to prevent one end from connecting with the other end. Short circuit at the end of the battery may cause fire or fire.

   • In abusive conditions, liquid will spill from the Lat1ery. Avoid contact if it is accidentally washed with water. II the fluid comes Into contact with the eye, seek medical help. Liquid spilled from the battery can corrode or burn

6. Maintenance

   • When you send your power tools to a professional repairman, you must replace them with the same spare parts. The tool with sharp cutting edge Is not easy to jam and easy to control.

Use of battery pack
4 inch and 6 inch chainsaws use 21V batteries, 8 inch chainsaws use 48V batteries. Please make sure the battery meets the specifications of the devices.

1. The chainsaws is compatible with Makita batteries, please make sure they are at the same specifications. (please not chargers are not compatible, use the charger of this product to charge Makita batteries may lead lo danger! )

2. The battery is fully charged. Please unplug it

3. The battery has temperature protection, low voltage protection and over-current nprotection. If abnormal power supply Is found during use, please check whether the
   temperature Is too high due to unreasonable m and need to be cooled before use. If the voltage Is too low, it should be charged In time. If the working current Is too large, It will be protected.

4. Is found that the battery has spark and smoke odor when working. Please stop using Immediately and contact the manufacturer.

Use of charger

1. Please use the original charger to charge the battery. please make sure chargers and batteries are al the same specifications.
2. The charger Indicator Is red during charging and It will turn to green when fully charged
3. Please make sure the connection Is stable.
4. Please use the charger at 32-104°F (0-40″C), of Is cold In winter, please charge II Indoors.

Scope of application
Orchard cutting trees, municipal garden pruning branches, cutting bamboo, household fire wood, outdoor leisure necessities, personal protective equipment

Installation instructions

1. Charge the battery, the red light is on when charging, and the green light is on when the battery Is fully charged.

2. Install the chain according to the operation drawing. Note: remove the battery pack during the Installation and removal of the guide plate.

3. After installation, start the machine with no load and observe that the machine runs normally.

4. Do not cut too hard, according to the actual cutting situation, first small and then large.

5. Fig 1
   When installing the guide plate, pay
   attention to the direction of the knife edge on the chain consistent with that shown on the aluminum parts of the main machine

6. Fig 2
   Install the chain into the sprocket, and insta the guide plate adjusting plastic pin Into the guide plate hole

7. Install the guide plate cover, install the nut and keep II ln a non tightening state, and keep it in a non tightening state, and adjust the guide plate elastic screw with a
   slotted screwdriver. Make the chain slightly tight.
   Note: the chain should not be too tight, and then, lock the guide plate gland nut. After the first installation or use, the chain wlll become loose. After loosening, repeat the above steps.

8. Finally, tighten the guide plate cover.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>