SMMI-CLASSM-VC Traulux Monitor Instruction Manual
- June 1, 2024
- Traulux
Table of Contents
SMMI-CLASSM-VC Traulux Monitor
SMMI-CLASSM-VC
This document provides the instruction manual for the Traulux model SMMI-
CLASSM-VC. Detailed assembly instructions, safety information, and
specifications are included to assist in the proper setup and use of the
product.
Specifications
| Reference | SMMI-CLASSM-VC |
|---|---|
| Maximum Load | 110 kg |
| Manufacturer Website | charmex.net / |
Assembly Instructions
Illustrated diagrams guide the assembly of the SMMI-CLASSM-VC model. Each step includes detailed drawings with labeled parts for clarity.
-
Step 1: Base Assembly
Components A (x2), B (x1), D (x2), E (x1), and F (x2) are used to assemble the base frame, with locking and unlocking the casters as shown in the diagram. -
Step 2: Vertical Structure
Vertical supports are attached to the base using components D and P as indicated in the assembly diagram.
-
Step 3: Frame Construction
The frame is constructed using components C, K, O, and various screws and bolts. The diagram shows the precise placement of each component.
-
Step 4: Mounting the Screen
The screen mounting process involves attaching the brackets to the frame and adjusting the tension as required.
-
Step 5: Attaching Interface Plate
The interface plate is attached to the brackets using screws, with a detailed view provided for securing the components.
Diagrams and Parts List
Diagrams show the individual parts and their correct orientation during assembly. A parts list includes all the screws, bolts, and components needed, labeled with corresponding letters and numbers for identification.
FAQ
-
Where can I find the maximum load capacity for the SMMI-CLASSM-VC model?
The maximum load capacity is 110 kg. -
Where can I find additional information or support for my Traulux product?
Additional information and support can be found at charmex.net or traulux.net. -
Are all necessary components for assembly included with the purchase?
Yes, all necessary parts for assembly are included and detailed in the parts list within the instruction manual. -
Can I adjust the height of the screen once mounted?
Yes, the mounting brackets allow for height adjustment as shown in the assembly diagrams.
IMPORTANT:
Failure to read, thoroughly understand, and follow all instructions can result
in serious personal injury, damage to equipment, or voiding of factory
warranty.
INSTRUCTIONS OF SAFETY AND WARNINGS
- Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
- DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
- Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause product damage that greatly reduces the holding power.
- Keep a clear area and distance from moving parts when using the product.
- Use only as intended. Never stand, hang, or climb on the product.
- This product is intended for indoor use only.
- Any attempts to reconstruct the construction aren’t allowed.
- This product may contain small items that could be a choking hazard if swallowed. Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months).
Should you ever have any questions or feel you require help please contact your place of purchase for assistance.
Additional Information
For further assistance with assembly, usage, or any inquiries regarding the
SMMI-CLASSM-VC model, please visit Traulux at
traulux.net.