W-KING D9-1 Outdoor Wireless Speaker User Manual
- June 13, 2024
- W-KING
Table of Contents
User Manual
D9-1 Outdoor Wireless Soeaker W-KING® is a registered trademark in the U.S. and
European Union.
All rights reserved.
D9-1 Outdoor Wireless Speaker
Thank you for purchasing the W-KING D9-1 Outdoor Wireless Speaker.
Please read this user manual carefully and keep it for future reference. If
you need any assistance, please contact our support team with your product
model number and order number.
Amazon E-mail: support.amazon@w-king.com
Walmart E-mail:
support.walmart@w-king.com
Package Contents
D9-1 Outdoor Wireless Soeaker
USB Type-C Charging Cable
3.5mm Audio Cable
User Manual
Product Diagram
Specification
Model Number | D9-1 |
---|---|
Bluetooth Version | BT5.0 |
Support Profiles | HFP V1.5, A2DP V1.2, AVRCP VIA, GAVDP V1.2, AVCTP V1.2, SPP |
V1.2, AVCTP V1.2
Power Input| DC 5V
Speaker Output Power| 60W
Drivers Unit| Woofer, 93±0.5mm, 40, 25W x 2 Tweeter, 31mm, 80, 10W x 2
Frequency Response| 60Hz – 20kHz
Signal-to-Noise Ratio| ≥ 80dB
Charging Time| 7-8 hours
Battery Type| Li-ion 7.2V 5200mAh
Operating Range| 10m / 33ft
Operating Temperature| 0°C – 40°C / 32°F – 104°F
Dimensions| 317 x 191 x 110mm / 12.48″ x 7.52″ x 4.33″
Net Weight| 2.68kg / 5.9Ib
Waterproof| Yes
True Wireless Stereo| Yes
Phone/Tablet Charging| Yes
TF Card Playing| Yes
Available Color| Black, Green
Charging
Fully charge this speaker before first Use. Use our provided USB Type-C
charging cable to charge your speaker.
Connect one end to the charging port, another end to a 5V / 2A USB power
adapter (not include).
When all three white LED charging indicators light up, your speaker is fully
charged and ready for use. Charging takes around 7-8 hours.
Note: USB power adapter is not included Power On / Off
Long press the ON/OFF button for 2-3 seconds to power on or off the speaker
Bluetooth Pairing
- When you turn on the speaker, it will automatically enter pairing mode and the LED indicator will start to flash blue rapidly
- Enable Bluetooth on your phone or other compatible device and select “W-KING D9-1”
- When successfully paired, the LED indicator will stay solid blue
Notes
- To reset the speaker (to clear the pairing list or any program errors), use a straightened paper clip to carefully short-press the reset hole at the rear of the speaker
- The speaker will automatically snut down after 10 minutes in pairing mode if no devices are paired
- If your paired device is switched off or manually disconnected, the speaker will enter pairing mode and automatically shut down after 10 minutes
- If the soeaker or connected device exceeds the operating range, the speaker will disconnect. The connection to the last successfully connected device will be re-established once you re-enter wireless range within 10 minutes. To connect to other devices, please repeat the previous “Pairing” steps
Reset Speaker
Use a straightened paper clip to press the reset hole at the rear of the
speaker
Play Audio via Audio Input Connection
- Connect the speaker to your PC, laptop, or other device with audio output port using the included 3.5mm audio cable
- Long press the on/off button for 2-3 seconds to turn on, and the LED indicator will keep solid green
Notes
- The speaker will disconnect from your phone or other paired device when an audio cable is plugged into the audio input jack
- When playing audio using the audio input jack, press the volume +/ – to adjust the volume and short-press play/pause to pause or resume. Next/previous track control on the speaker is disabled in audio inout mode
- For some computers, you may need to access the audio control panel to manually set the speaker as the default audio device
Charging Phone/Tablet
- Connect your phone/tablet to the USB port of the speaker
- Turn on the speaker, your device will be charged automatically
- Turn off the speaker to discharge your device
Adjust Sound Effect / Equalizer
Short press the Equalizer button ” fT 1 tT” to switch between bass boost mode
and high and treble boost mode
TF Card Playback
- Insert a TF card into the TF card slot on the speaker
- Green light keeps bright at indoor mode, flashes at outdoor mode
Answer / Reject / End / Redial Calls
- Short press the Play / Pause button to pick up an incoming call
- Long press the Play / Pause button fo reject an incoming call
- Short press the Play / Pause button during a call to hang up
- Long press the Play / Pause button fo redial the last dialed number
True Wireless Stereo Pairing
-
Turn on both of your D9-1 speakers simultaneously, you will see blue LED indicator flashes rapidly on the two devices
-
Select one speaker as the leading speaker, double press the ON/OFF button to start pairing.
-
After successfully paired, the blue LED indicator of the leading speaker flashes slowly and the secondary speaker LED keeps bright blue
-
Turn on your phone’s Bluetooth, search “W-KING D9-1” and connect.
The blue LED indicator of the leading speaker keeps bright. The two speakers will play music simultaneously when complete pairing -
To disconnect True Wireless Stereo pairing, press the volume button “+” and “-” at the same time, you will see blue LED flashes rapidly on the secondary speaker, that means True Wireless Stereo unpaired success- fully
-
Note: Please pair the speakers first, then turn on Bluetooth on your device. Don’t turn on Bluetooth first then pair the speakers.
Because of the shortage of chips in the whole market, we have two version D9 speakers.” W-KING D9” and “W-KING D9-1″ are the different version speaker. They could not be paired in True Wireless Stereo mode.
True Wireless Stereo function only works under the same Bluetooth name. We may not sell “W-KING D9” any more.
NFC Pairing- Long press the power button for 2-3 seconds to turn on the speaker
- Enable NFC on your device and put it close to the NFC logo on the speaker
- Wait for a few minutes and you will see pop-up window on your phone screen, tap “Confirm” or “OK” to continue
- You will hear a sound once successfully paired
Note: Please turn OFF Bluetooth on your device before connecting NFC.
Product Care & Use
Functions | Instructions |
---|---|
Adjust volume | Short cress volume button + / – |
Pause / Resume | Short press play/pause button |
Next / Previous track | Long press + / – to Next / Previous track |
Cancel pairing | When connected, press volume button + and – at the same time |
Answer / End a call | Short press the play/pause button once |
Reject an incoming call | Long press the play/pause button for 2 seconds |
Redial last-called number | Long press the play/pause button |
LED Indicator | Status |
--- | --- |
Blue flashing rapidly | Pairing mode / Disconnected |
Solid blue | Connected / Bass boost |
Blue flashing | High and treble boost |
Solid green | Audio input mode |
Red light flashing | Low battery |
White lights flashing | Charging |
White lights on (after charging) | Fully charged |
- Keep away from liquids, extreme heat, and strong magnetic fields
- Do not use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss
Warranty & Customer Support
For questions, support, or warranty claims, contact us at
Amazon E-mail: support.amazon@w-king.com
Walmart E-mail:
support.walmart@w-king.com
Please contact us with your region, order number and product model.
*Please note, W-KING can only provide after sales service for products purchased directly from our official online store. If you have purchased from a different seller, please contact them directly for service or warranty issues.
Notice for US
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
FCC Rules
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equioment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged fo try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Caution
Changes or modifications made to this device not expressly approved by W-KING
may void the FCC authorization to operate this equipment.
The simplified EU declaration of conformity shall contain the
elements of Annex VII:
Hereby, SHENZHEN WEIKING TECHNOLOGY CoO., LTD declares that
the radio equipment type [designation of type of radio equipment is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet adaress:” http://www.example.com/doc.
SHENZHEN WEIKING TECHNOLOGY CoO., LTD
CN, 518109, Guangdong, Shenzhen, Longhua, Fucheng Street, Zhangge Community,
Zhangge Road, NO.142, Building 1, Room 301
Tel: +86-755-36690577
Fax: +86-755-368 15032
Amazon E-mail: support.amazon@w-king.com
Walmart E-mail:
support.walmart@w-king.com
www.w-king.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>