cudy LT18-P5 18 WiFi 6 Router Installation Guide
- June 9, 2024
- cudy
Table of Contents
cudy LT18-P5 18 WiFi 6 Router
INSTALLATION
- Install the cellular antennas.
- With the gold contacts facing down, gently slide the nano SIM card into the SIM1 slot until you hear a click sound.
- Connect the power adapter to the route
- Turn on the router. Waiting 2-5 minutes for it to start.
- Check the status of the LED.
Customize The Router
- Connect the router via Ethernet cable or Wi-Fi.
- The network name and password is printed on the bottom of the router.
- Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login.
- The page below would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.
- Then please check cellular information card of the status page. If the status is connected, it means the internet connection is successful.
- If the Internet is not connected, or you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router
Note
- If you are not sure about APN parameters, please contact your internet provider
- If you meet any other problems, don’t hesitate to contact our technical support team: support@cudy.com
- Frequently Asked Questions: https://www.cudy.com/faq.
LED and Button
How to upgrade firmware?
- Download the latest firmware from https://www.cudy.com/download
- Unzip the file you download
- Connect to Cudy’s network via WiFi or Ethernet.
- Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
- Log into the web management page.
- Click Advanced Settings > Firmware.
- Choose the firmware you unzipped to upload.
- Waiting 2~5 minutes for the router to restart.
- Done
GNU General Public License Notice
The sotware code in this product was created by third parties and is
licensed under the GNU General Public License (“GPL”). If applicable, Cudy
(“Cudy” in this context refers to the Cudy entity offering respective software
for download or being in charge ot the distribution ot products that contain
respective code) makes the corresponding GPL source code available upon
request via the ofticial website, either independently or with the assistance
ot third parties (such as Shenzhen Cudy Technology Co., Ltd.). For GPL-related
questions, email support@cudy.com. In addition, Cudy
otters a GPL-Code-Centre under https://www.cudy.com/gplcodecenterdownload
where users can get the GPL source codes used in Cudy products for free.
Please note, that the GPL-Code-Centre is only provided as a courtesy to Cudy’s
customers but may neither offer a full set ot source codes used in all
products nor always provide the latest or actual version ot such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY,
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU. The original EU declaration of conformity can be
found at http://www.cudy.com/ce
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19/EU), this product must not be disposed of as normal household
waste Instead, they should be returned to the place of purchase or taken to a
public collection point for recyclable waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more intormation, please
contact your local authority or the nearest collection point. Improper
disposal of this type of waste may result in penalties according to national
regulations.
Need Help?
What should I doif I cannot access the web management page?
- A1:f the computer is set to a static IP address, change its settings to obtain an IP address automatically.
- A2: Make sure http:/lcudy.net/ or http://192.168.10.1/ is correctly entered in the web browser.
- A3: Use another web browser and try again.
- A4: Reboot your router and try again
- AS: Disable and enable the active network adapter in use.
How do I restore the router to its factory default settings?
- A1: With the router powered on, press and hold the RESET button tor 6 seconds and then release it, vvait the router to reset.
- A2: Log into the web management page ot the router, and go to Advanced Settings>Reset, click Pertorm Reset and wait until the reset process iS Completed.
What can I do if I meet other problems?
- A1: Find answers on: https://www.cudy.com/taq
- A2: Contact cudy technical support team via email: support@cudy.com
- A3: Contact cudy technical support team via skype: supportgcudy.com
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interterence received, including interterence that may aluse UndesirecOneration
Email
support@cudy.com
Website:
www.cudy.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>