FONESTAR MALIBU-110L Portable Speaker Instruction Manual
- June 9, 2024
- Fonestar
Table of Contents
FONESTAR MALIBU-110L Portable Speaker
DESCRIPTION
High power and sound quality provided by its high efficiency Class D
amplifier.
It integrates all the necessary elements for a live performance or speech: 1
UHF wireless microphone, 1 microphone input, 1 auxiliary input, USB/SD/MP3
player, mixer, echo function and tone control, loudspeaker and amplifier.
Its long-life rechargeable battery makes it very versatile and adaptable to
numerous uses.
It is very resistant to transport thanks to its robust injection moulded
construction.
The audio inputs have the standard audio connections of the market: XLR and
RCA.
Includes remote control unit for distance control.
Its simple and intuitive use minimizes the time of configuration depending on
the use.
CONTROLS AND FUNCTIONS
-
Connection port for SD memory cards.
-
Connection port for USB storage devices.
-
USB/SD/MP3 player module information screen.
-
Infrared receiver for the remote control.
-
MODE: allows you to select between the different audio sources available.
-
a short press of these buttons allows you to skip to the previous/next audio track.
A long press of these buttons decreases/increases the volume of the player. -
allows you to change the playback and repeat mode of the files contained in the USB storage device and SD memory card..
-
a short press of this button starts/pauses playback.
A long press allows playback by folders. -
VOL: wireless microphone volume control.
-
RF: radio frequency signal level indicator light.
-
Power indicator light for the wireless receiver module.
-
ON/OFF: switch that activates/deactivates the wireless receiver module of the portable amplifier.
-
AUX INPUT: line level stereo aux input, 2 x RCA connectors.
-
MIC: balanced mic. level input, XLR connector.
-
VOL: microphone input volume control.
-
MP3 PLAYER VOL: volume control for the aux input and MP3 player.
-
ECHO: control for adjusting the number of repetitions of the echo effect of the microphone input.
-
MASTER: output volume control for the final mix of all inputs.
-
Indicator light to indicate the operation of the amplifier with battery.
-
Low battery indicator light. The amplifier battery must be charged.
-
CHARGING: recharge indicator light.
To charge the battery of the portable amplifier, connect it to the mains socket and switch on the amplifier with the switch located at the bottom of the rear panel of the device. -
POWER: power indicator light for the portable amplifier.
-
PEAK: peak signal indicator light. It lights up when an input signal is detected with a very high level or when there is an excessive output level that can cause damage to the equipment.
-
BASS: control that reinforces or dims the low frequencies, ±10 dB.
-
TREBLE: control that reinforces or dims the high frequencies, ±10 dB.
-
POWER: general on/off switch for the amplifier.
-
Input to connect the AC power cable.
HANDHELD MICROPHONE
-
BATT: operation and low battery indicator light. When the battery charge is optimal, the indicator light remains lit. When the battery charge is low, the indicator light remains on with less intensity. Replace the batteries with new ones.
-
Hand-held microphone on/off switch. In addition, this selector has a third MUTE position to mute the
audio output with the microphone on. -
Battery compartment. Use 2 LR6-AA 1.5 V batteries, preferably alkaline. When inserting the batteries, make sure the polarity is correct.
REMOTE CONTROL
- start/pause playback.
- EQ: allows you to select between the different existing equalisations.
- CH -/CH +: one press on these buttons skips to the previous/next audio track.
- VOL -/VOL +: player volume controls.
- a short press on these buttons allows you to skip to the previous/next audio track.
- 0-9: numeric buttons for automatic selection of the desired audio track.
- MODE: allows you to select the desired audio source.
- ENTER: allows you to change the play and repeat mode of the player (repeat all, repeat folder, repeat 1 and random play).
CONNECTION AND OPERATION
Before making any connections, make sure that all equipment is turned off and
disconnected from the power outlet.
The basic connections are as follows:
-
Microphone input (MIC INPUT): Connect a microphone to this input. The input is balanced, for dynamic microphones with an XLR connector.
-
Line input (AUX INPUT): connect an external sound source (CD player) to the input, audio player, etc).
Line input is with 2 x RCA connectors. -
Turn on the amplifier with the switch located at the bottom of the rear panel. The device can be powered directly by the current or by using the internal battery.
Once the connections have been made according to your needs, connect the other devices to the mains socket and switch them on. After use, do not forget to turn off and disconnect the device from the power outlet.
INSTRUCTIONS FOR USE
RECHARGEABLE BATTERY
To charge the battery, connect the equipment to a 230 V AC outlet using the
power cable and turn it on with the switch at the bottom of the rear panel.
Keep the device connected to the mains socket and switched on during the
charging time, approximately 5 hours.
The battery life depends on the use and mode of operation of the equipment. In
general, the battery life is longer than 5 hours.
SWITCHING ON AND POWER SUPPLY
When switching the equipment on and off, be sure to set the volume controls to
the minimum. Depending on the power mode of the device, it may be turned on in
a different way.
AC: connect the equipment to the 230V AC outlet using the power cord.
Turn on the portable amplifier with the switch located at the bottom of the
rear panel. The POWER indicator light will light up.
Rechargeable battery: with the power cord disconnected, turn on the power with
the switch at the bottom of the rear panel. The equipment will be powered via
the rechargeable battery. You can check the status of the battery charge level
indicated by the LEDs on the rear panel.
USB/SD/MP3 PLAYER
Connect the storage device that includes MP3 files through the corresponding
port and wait while the files are read. Playback will start automatically.
You can control playback with the controls on the USB/SD/MP3 module located on
the rear panel of the device.
TECHNICAL SPECIFICATIONS
| MALIBU-110L | |
|---|---|
| FEATURES | Portable speaker. |
1 UHF 684 Mhz handheld wireless microphone. USB / SD / MP3 player.
Lithium battery.
Echo function and tone control. Trolley transport cart.
Remote control.
Hole in the base for 35 mm tube.
POWER| 100 W maximum 20 W RMS
LOUDSPEAKERS| 1 x 10” woofer
1 x 1” tweeter
INPUTS| 1 micro, XLR
1 stereo aux, 2 x RCA
POWER SUPPLY| 110-230 V AC
Lithium battery 11 V, 2 Ah Rechargeable battery life: 5 hours Charge time: 5 hours approximately Operates while recharging
DIMENSIONS| 310 x 490 x 280 mm depth
OPTIONAL| FAL-M10 : carrying bag
SIMPLIFIED EU DECLARATION OF CONFORMITY
FONESTAR SISTEMAS S.A. hereby declares that the Portable speaker MALIBU-110L
complies with the Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available at the
following internet address:
fonestar.com/ES/MALIBU-110L
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>