cudy AX1800 Dual Band Smart Wi-Fi 6 Router Installation Guide
- June 9, 2024
- cudy
Table of Contents
- cudy AX1800 Dual Band Smart Wi-Fi 6 Router Installation Guide
- Method One: Using WPS Button(EN)
- For example:
- Method Two: Using Web browser
- LED and Button
- Frequently Asked Questions
- Q3: How to Reset to defaults?
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
cudy AX1800 Dual Band Smart Wi-Fi 6 Router Installation Guide
Method One: Using WPS Button(EN)
-
Plug the extender next to your router, and wait until the LED turns solid on.
-
Press the WPS button on your router, and then press the WPS button on the extender within 2 minutes.
-
Then the LED will start to flash,wait until the LED and LED turn solid on, which means the extender connects to your existing host WiFi network
-
If the LED does not turn solid on after 2 minutes, try step 2 again.
If still not work, try Method Two: Using Web Browser, or contact our support team support@cudy.com. -
Connect your device to the extender‘s WiFi network.
The extender’s new WiFi network name is based on your Host
WiFi network name, with —EXT2G or —EXT5G at the end of the name.
For example:
Host WiFi network name: YourNetworkName
New extended WiFi network name: YourNetworkName—EXT2G YourNetworkName—EXT5G
Use the same WiFi password that you use for your WiFi router
- Relocate the extender halfway between your router and the WiFi dead zone, find a good place to plug it according to the LED
Method Two: Using Web browser
-
Plug the extender next to your router, and wait until the LED turns solid on.
-
Connect your computer or smartphone to the extender’s network Cudy—RE1800
-
. Then below window will pop up, Use admin for password tolog in.
Note: If the login window does not appear,Launch a web browser, and enter http://cudyre.net/ or http://192.168.10.254/ in the address bar. Use admin for password to log in. If still not work, please refer to FAQ > Q1.http://cudyre.net/ Select Wireless Extender,then click Next.
Follow the step by step configuration to the end. After configuration, below
page would pop up.Then wait the LED turns solid ON, it may take 1 or 2
minutes.
Note: Please check the information on the screen and confirm that the password
is the same as the wifi password of the router. Otherwise, the extender will
not be
able to connect to the router WiFi.
4. Relocate the extender halfway between your router and theWiFi dead zone,
find a good place to plug it according to the LED.
Connect your device to the extender using the extended SSID and WiFi password
that you’ve set during the configuration. The default WiFi password is the
same as your host WiFi network
(router WiFi).’
LED and Button
Frequently Asked Questions
Q1: What can I do if the login window does not appear?
A1: If your computer is wirelessly connected, make sure that you have
connected to the extender’s SSID.
A2: If your computer is connected via an Ethernet cable, please make sure that
the connection is stable.
A3: Make sure your computer is set to obtain an IP address and
DNS server address automatically.
A4: Verify that http://cudyre.net/ (or http://192.168.10.254/)is correctly
entered in the web browser and press Enter.
A5: Reset the device and try again
Q2: What should I do if my handy can not find Wi-Fi signal?
A: Please make sure the device is connected, power on. If everything is normal
but still no signal, please try to use computer to set, or restore the
extender to factory settings. If after restoring factory settings but still no
signal, you can restart the extender, if it still doesn’t work, maybe the
device has fault.
Q3: How to Reset to defaults?
A: While the power is still on, keep pressing the Reset button for
2 seconds, and wait for 1-2 minutes for it to restart.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>