AMEWI 22568 Mercedes-Benz Arocs Grapple Dump Truck User Manual

June 9, 2024
AMEWi

AMEWI 22568 Mercedes-Benz Arocs Grapple Dump Truck User Manual
AMEWI 22568 Mercedes-Benz Arocs Grapple Dump Truck

OPERATION OF REMOTE CONTROL

REMOTE CONTROL

INSTALLATION OF REMOTE CONTROL BATTERY

  1. Loosen the screw of battery cover by screwdriver and take out battery cover. (Pic.1)
  2. Put four 1.5V “AA ” batteries (batteries need to be purchased separately) into the battery box to the right polarity at the bottom of remote control. (Pic.2)
  3. Install the battery cover and tighten the screw. (Pic.3)
    Battery Installation
    ATTENTION: Batteries shall be put to the right polarity.

ROCKER INSTALLATION

Screw the rocker into the remote control rocker interface as shown in the figure, the installation method is the same on both sides.
ROCKER INSTALLATION

BATTERY INSTALLATION

  1. Loosen screw on battery cover by screwdriver, twist the buckle and take out battery cover .(Fig. 1)
    BATTERY INSTALLATION

  2. Connect Li-ion with power port of truck, then put it into the battery box. (Fig. 2)
    BATTERY INSTALLATION

  3. Install the battery cover., tighten the screw and twist the buckle back, (Fig.3)
    BATTERY INSTALLATION

BATTERY CHARGING INSTRUCTIONS

CHARGING METHODS

Connect the white port of Li-ion to USB charging port, as shown in the Figure, and ensure port can be connected tightly and correctly, then insert the USB charging plug into power adapter, and perform charging.

BATTERY/USB PARAMETERS
Battery specifications: 18650 7.4V 1200mAh Li-ion

Intelligent USB balance charger with overcharge protection Input: 5V 2A Output: 7.4V — 1000mA

INDICATOR LIGHT STATUS AT THE TIME OF CHARGING:
Uncharged state: red light always lit Charged state:
Red light always lit + Green light flashes Full charging state: green light always lit Charging period: 2-4 hours When battery is charged, please pull off the USB charger lead in time.

PRECAUTIONS OF Li-ion

  1. The battery must be charged with a dedicated USB charging cable.
  2. The USB charging cable must be connected to a 5V USB power adapter.
  3. Because the damaged lithium battery may ignite spontaneously, please do not charge it.
  4. The battery must be charged according to the specified method. If the lithium battery is used incorrectly, there is a high risk of spontaneous combustion.

SAFE USAGE INSTRUCTIONS FOR Li-ion

  • If the lithium battery is used incorrectly, there may be a danger of spontaneous combustion.
  • Our company will not be responsible for all losses caused by incorrect use of lithium batteries.
  • Because it is likely to cause an explosion or fire, it is strictly prohibited to use a charger other than the original charging cable to charge the lithium battery. It is strictly forbidden to disassemble, bump, burn, reverse the positive and negative poles of the battery. Avoid metal objects and The positive and negative poles of the battery are in contact. It is strictly prohibited to pierce the battery with sharp objects to avoid the risk of battery fire.
  • Please charge the battery within the visible range. Never stay away from the battery that is being charged.
  • To prevent injury, keep the battery out of the reach of children.
  • Please do not charge a damaged lithium battery. It may cause battery expansion, deformation, explosion or fire.
  • In order to protect the environment, damaged batteries should be properly disposed of in accordance with regional or national waste regulations. deal with.

FREQUENCY PAIRING AND POWER ON OF REMOTE CONTROL

The product is remotely controlled with 2.4GHz frequency. For the first operation, the user must install the battery on the vehicle body and the remote control first, then make sure to power on, turn on the power to pair the frequency automatically. When the indicator light of the remote control stops flashing, the vehicle will make a “tick” sound, that is, the frequency pairing is completed. If the vehicle does not respond to the remote can turn off the power of remote control and vehicle, turn on the power of remote again to match again (same steps as above).
Power Buttons

CONTROL OF LIGHT AND SOUND

Controlling Light

FRONT WHEEL FINE TUNING

WHEEL FINE TUNING

When the car cannot move in a straight line, it can be corrected by fine- tuning the front wheels.
Front Wheel Control

Rectification of deviation to the left
Front Wheel Control

Press this button, and the front wheels will turn right lightly.
Front Wheel Control

Rectification of deviation to the right
Rectification of deviation

Press this button, and the front wheels will turn left lightly.
Wheel Control

GRAPPLE OPERATING INSTRUCTIONS OF

OPERATING INSTRUCTIONS

GRAPPLE ARM OPERATING INSTRUCTIONS OF
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS

TRUCK OPERATING INSTRUCTIONS

TRUCK OPERATING INSTRUCTIONS
TRUCK OPERATING INSTRUCTIONS

Declaration of Conformity

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing european and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade e.K. declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU (RED). The declarations and documents are stored at the manufacturer and can be requested and applied there.

The full text of the declaration of conformity can be found at: https://amewi.com/Konformitaetserklaerungen

For additional questions to the product and conformity please contact:
Amewi Trade e.K. Nikolaus-Otto-Str. 18, 33178 Borchen or via the website amewi.com

Security and Hazard Warnings

Warning! For damage, caused by disregarding of the manual, warranty expires !
We are not liable for secondary failures, material or personal damage, caused by inproper usage or disregarding the security notices.

Warning! Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.

Warning! Small parts. Danger of suffocation or risk of injury caused by small parts.

Note IconWarning!
The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.

Battery Notice and Battery Disposal
Warning! Battery do not belong in childrens hands. A change of the battery has to be done by an adult person. Never mix chargable batteries with non-chargable batteries. Never mix fully charged batteries with almost emtpy batteries. Never mix batteries of different capacities. Never try to charge dry batteries. Take care of the correct polarity. Defective batteries belong to special waste. Never leave a charging battery unattended. For questions about the charging time please read the manual or ask the manufacturer.

Disposal

The company AMEWI is registered below the WEEE Reg. Nr. DE93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime accroding to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden

Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.

Additional notations for the critical heavy metal are: Cd=Cadmium, Hg=Quecksilver, Pb=lead (Label is placed on the batteries, for example below the bottom left trash symbols).

Based on RoHS labeling the manufacturer confirmes, that all limit values were taken care of at the time of manufacturing.

Batteries labeled with the recycling symbol can be put into used battery collecting tank. (Most supermarkets have)
They are not allowed to be put into local household garbage.

AMEWI Trade e.K. is involved in the dual system for boxing over the company Firma Landbell AG. All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The Involvement in Dual Systems helps to save CO* Emissions.

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals