Cambium Networks C000000L176A Cable Gland for 6mm Cable Instructions
- June 9, 2024
- Cambium Networks
Table of Contents
Instructions
C000000L176A Cable Gland for 6mm Cable
Figure 43: DAC Cable
Note
Cambium Networks recommends to use the cable gland (part number: C000000L176A
Cable Gland for 6 mm cable, M25, Qty 10) with the DAC cable for 60 GHZ cnWave
products.
Following are some of the benefits of using the DAC cable:
- Eliminates the need to buy two SFP+ transceivers and a compatible optical cable, resulting in a reduced inventory management and a low cost solution.
- Consists of factory terminated and ensures watertight sealing.
- Prevents installation errors when terminating optical cables to SFP+ transceivers.
Use cases
Following are the use cases of the DAC cable:
- Connecting a V3000-to-V3000 backhauled link
With the use of the DAC cable, the V3000 devices can achieve an aggregate speed of up to 3.6 Gbps.
Typically, a multi-hop point-to-point link deployment, which connects two back-to-back V3000 devices, requires the use of 10 Gig SFP+ interface. In such cases, the DAC cable (from Cambium Networks) can be used, instead of two SFP+ transceivers and an optical cable, to backhaul the traffic (as shown in Figure 44).
System Hardware
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>