Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply User Manual

N000900L032A Series Power Over Ethernet Cable Power Supply
User Manual

N000900L032A Series Power Over Ethernet Cable Power Supply

N000900L032A
CABLE. UL POWER SUPPLY CORD SET. 720mm. UK| V1000. V2000. V3000. and V5000| N000900L033A
CABLE. UL POWER SUPPLY CORD SET. 720mm. Brazil| V1000. V2000. V3000. and V5000| N000900L034A
CABLE. UL POWER SUPPLY CORD SET. 720mm. Israel| V1000. V2000. V3000. and V5000| N000900L037A

Refer to Maximum cable lengths for details of the maximum cable lengths and the maximum PoE output power for different powering options.

V1000 Power over Ethernet

The V1000 CN is always powered using Power over Ethernet (PoE) at a nominal 56V, as shown in the PoE power supply to V1000 figure using the Gigabit power injector supplied with the radio, or using an IEEE 802.3af PoE output from an Ethernet switch.
Figure 33: PoE power supply to V1000

Table 16: PoE, 15W 56V, 1 Gigabit DC injector (N000900L017A)

condition is removed
Hold up time| At least 10 milliseconds
RJ45 POE Port|  7.8 DC V-  5.6 DC V+

Note
The Gigabit power injector is supplied with the cnWave V1000 CN. Order part N000900L017A to obtain spares.
Warning
Always use an appropriately rated and approved AC supply cord-set in accordance with the regulations of the country of use.
V2000 Power over Ethernet
The V2000 CN is always powered using Power over Ethernet (PoE) at a nominal 56V using the Gigabit power injector supplied with the radio or using an IEEE 802.3af PoE output from an Ethernet switch.

![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Icon](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig.png)

Table 17: PoE, 30W 56V, 5GbE DC injector (N000000L034B)

condition is removed
Hold up time| At least 10 milliseconds
RJ45 POE Port| 1,2.7,8 DC V- 3.4,5,6 DC V+

V3000, V5000 Power over Ethernet
The V3000 CN and V5000 DN can be powered using DC power at a nominal 54V, using 14 AWG or 16 AWG cable, as shown in the DC power supply to V3000 or V5000 figure.
![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Fig 1](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig-1.png)

Table 18: PoE, 60W, 56V, 5 GbE DC injector (N000000L142A)

condition is removed
Hold up time| At least 10 milliseconds
RJ45 POE Port| 1.2.7.8  DC V-
3.4.5.6  DC V+

V3000, V5000 Outdoor AC/DC power supply unit
Figure 36: DC power supply to V3000 or V5000

![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Fig 2](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig-2.png)

The outdoor PSU can be installed indoors, in an outdoor cabinet, or inside street furniture.

![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Fig 4](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig-4.png)

Table 19: Outdoor AC/DC PSU, 54V DC

in) x 37 mm (1.5 in)
N000000L179A(100W)| 220 mm (8.7 in) x 68 mm (2.7 in) x 39 mm (1.5 in)
Power| 60W
100W
Temperature| -40°C (-40°F) to +60°C (140°F)
Humidity| 20 to 95 % non-condensing
Waterproofing| IP65/1P67
AC Input| 90-305 V AC, 47-63 Hz
DC Output Voltage| 54V
DC Output current| 60W| 1.15 A
100W| 1.77 A
Efficiency| Better than 90% at full load
Over Current Protection| Hiccup mode, recovers automatically after the fault condition is removed
Hold up time| At least 16 milliseconds
Power factor| Better than 0.95

![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Fig 5](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig-5.png)

These cable joiners and DC to RJ45 cable adapters are used to connect to outdoor AC/DC PSU. Refer to
Maximum cable lengths for details of the maximum cable lengths and the maximum PoE output power for different powering options.
Note
If you are using the mini RJ45 power adapter, you must use the cable gland (C000000L123A) to ensure that the cable is protected. This cable gland comes in the radio box. For more details about the cable gland, refer to Table 23.

PSU Specifications

The PSUs conform to the specifications are listed in Outdoor AC/DC PSU, 54VDC.
Ethernet and DC cables
Maximum cable lengths
Ethernet
For all cnWave radios, the maximum cable length for data transmission over copper Ethernet (100BASETX, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T) is 100 m (328 ft) from the radio to the connected equipment.
It is recommended to use outdoor braided CAT6A cable for V2000, V3000, V5000, and outdoor braided CAT5e cable for V1000.
For installations where the auxiliary device is powered using ODU Aux POE port, refer to the Maximum cable lengths supported table.
The maximum cable length for fiber Ethernet (10GBASE-SR, 10GBASE-LR) connections depends on the fiber used. See SFP module kits on page 19 for details of the Ethernet standards supported and maximum permitted cable lengths.
Power over Ethernet (PoE)
The maximum length for supplying power from a 60 W DC injector over a CAT6A Ethernet cable is shown in the Maximum cable length for Power over Ethernet table. 60W DC injector is used to power on V2000, V3000, or V5000.
The maximum length for supplying power from a 30 W DC injector over a CAT6A Ethernet cable is shown in the Maximum cable length for Power over Ethernet table. 30W DC injector is used to power on V2000.
Table 20: Maximum cable length for PoE supported

The available output power for auxiliary Power over Ethernet output in V2000, V3000, and V5000 is reduced at longer PoE cable lengths, as shown in the Maximum cable length for Power over Ethernet table.
Table 21: Maximum PoE output power

Using AC/DC PSU with a DC power feed
The maximum length for supplying power over a CAT6A Ethernet cable is shown in the Maximum cable length for DC power table.
Table 22: Maximum cable length for DC power

Radio| PSU| PoE enabled| Maximum cable length 14 AWG| Maximum cable length 16 AWG
---|---|---|---|---
V3000| 60W| | 780m| 490m
25W| 140m| 90m
100W| –| 780m| 490m
25W| 390m| 250m
V5000| 60W| –| 660m| 410m
25W| Not supported
100W| –| 660m| 410m
25W| 360m| 220m

Outdoor copper CAT6A Ethernet cable
Select an outdoor-rated CAT6A cable, ready terminated with RJ45 connectors in one of the following
lengths:

• 25m
•  50m
• 100m
  Alternatively, terminate bulk CAT6A cable with RJ45 connectors at a length to suit each installation.

Attention
Always use CAT6A or better cable that has an overall copper braid shield, is outdoor rated with a UV-resistant sheath.
Table 23: Terminated Ethernet cable part numbers

Cable accessories

This section provides information about the required cable accessories.
Figure 41: Standard cable gland

![Cambium Networks N000900L032A Series Power Over Ethernet Cable Power Supply

• Fig6](https://manuals.plus/wp-content/uploads/2023/02/Cambium-Networks- N000900L032A-Series-Power-Over-Ethernet-Cable-Power-Supply-Fig6.png)

Cable accessories available from Cambium Networks are listed in the Cable accessory part numbers table below.
Table 24: Cable accessory part numbers

Note
One cable gland for 6-9mm cable size is included with each cnWave radio. Order additional cable glands as spares, where smaller cable size is to be used, or where the V3000 or V5000 Aux port is to be used.
SFP Module kits
SFP Module kits allow the connection of a V3000 CN or V5000 DN radio to a network over a 10 Gigabit optical Ethernet interface in one of the following full-duplex modes:

• 10GBASE-SR
• 10GBASE-LR

Order SFP+ module kits from Cambium Networks (SFP module part numbers).
The SFP+ module must be used with the long cable gland.
Table 25: SFP module part numbers

Direct attach copper (DAC) cable

The DAC cable is an accessory that eliminates the need for buying two SFP Transceivers and a OM3 optical cable required to run a 10 Gigabit link. It is a low cost solution used for:

1. Connecting a V5000 device that is backhauled by a V3000 device, and
2. Connecting V3000-to-V3000 backhauled link.

The DAC cable from Cambium Networks (part number : DAC-10G-2M) is a combination of Twinax copper cable factory terminated with SFP+ modules. It delivers data rates of up to 10 Gbps. It is an outdoor, UV protected cable with two-meters length and operates at temperature ranging between -40°C and 85°C.
The DAC cable (as shown in Figure 43) is a plug and play alternative that enables 10 Gigabit connectivity through the SFP+ port with no need for buying separate SFP+ transceivers and optical cables.       

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>