ZYXEL VMG3625-T50B Dual Band Wireless AC or N VDSL2 Combo WAN Gigabit Gateway User Guide

ZYXEL VMG3625-T50B Dual Band Wireless AC or N VDSL2 Combo WAN Gigabit Gateway

Package Contents

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 S0borg, Denmark.
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Copyright© 2019 Zyxel Communications Corp. All Rights Reserved.

Step 1 Hardware Connections

Use the gray phone cable to connect the DSL port to a DSL splitter or directly to the telephone wall outlet.

| Green| On – Power is on.
Blinking – Starting up.
---|---|---
Red| On – Malfunctioning.

Blinking – Upgrading firmware.

| Green| On – Internet is ready.

INTERNET

Blinking – Transmitting/receiving Internet data.

Red| On – Attempted to get an IP address, but failed.
Off – Internet is not ready.

Step 2 WiFi Connection

use the 551D and Wireless key on the device label to connect wirelessly to the VMG3625-T50B. On your smartphone or notebook, find this S51D. Enter the Wireless key to connect

Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber.
Press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection .

| Amber| Blinking -The VMG3625-T50B is connecting to 2.4 GHz WiFi via WPS..
---|---|---
Green| On – 2.4 GHz WiFi is ready.

Blinking – Transmitting/receiving data.

| Amber| Blinking -The VMG3625-T50B is connecting to 5 GHz WiFi via WPS.
Green| inking – Transmitting/receiving data.

Step 3 Quick Start Wizard

Open a web browser and go to http://192.168.1.1. Enter the default User name (admin) and ad min Login Password (on the device label), and then click Login. The Wizard runs. Follow the Wizard prompts to complete the setup.

Wall Mounting (Optional)

Optional)
CD Drill two holes on the wall at the distance of 130.8mm.

1. Insert screw anchors and screws (not provided) into the holes.
2. Place the VMG3625-T50B so the wall mount holes line up with the screws. Slide the VMG3625-T50B down gently to fix it into place.

Regulatory Notice and Statement

UNITED STATES of AMERICA

The following information applies if you use the device within the USA.
FCC EMC Statement

• The device complies with Port 15 of FCC rules. Operation is subject to the following two conditions:

(1) This device moy not co use harmful interference, o nd
(2) This device must accept Any interference received, including interference that may cause undesired operation.

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
  , This device hos been tested and complies with the specifications for o Clases B digital device, pursuant to Port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in o residential installation. This device generates, uses, and con radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in o particular installation.

• If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the devices

• Connect the equipment to on outlet other thon the receiver’s

• Consult o dealer or on experienced rod lo/TV technician for assistance

The following information applies if you use the device with RF function within the USA.
FCC Radiation Exposure Statement

•  This device complies with FCC RF radiate ion exposure limits set forth for on uncontrolled environment.

• This transmitter must be at least 20 cm from the user and must not be co-located or operating in
  conjunction with any other antenno or transmitter.

• Operation of t his device is restricted to indoor use only, except for relevant user’s manual mention that this device con be installed into the external environment.

• For 2.4G WLAN, only channels 1 -11 ore operational. Selection of other channels is NOT possible.

This equipment complies with Port 68 of the FCC revles. Located on the equipment is o label thot contains, among other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN’s on the telephone line may result in the devices not ringing in response to on incoming coll. In most, but no toll or eos, t he sum of the RE N’s should not exceed five (5.0). To be certain of the number of devices that may be connected to the line or  determined by the total REN’s contact the telephone company to determine the maximum REN for the colling oreo.
This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs.

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right the file a complaint with the FCC if you believe it is necessary.

The telephone company may make c hanges in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain un interrupted service.

If trouble is experienced with this equipment, please contact:
Company Name: Zyxel Communications Inc.
Address: 1130 North Miller Street Anaheim, CA 92806-2001
TEL: 714-632-0882
If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.
This equipment uses the following USOC Jocks: RJ11
REN: 0.1
It is recommended that the customer install an AC surge arrester in the AC outlet ta which this device is connected. This is to ovoid damaging the equipment caused by local lightning strikes and other electrical surges.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>