Sensata AP1 Video Telematics User Guide
- June 9, 2024
- Sensata
Table of Contents
- Package contents
- Key functions
- ADAS functions
- Driver safety warnings
- GPS reception
- LEDs & buzzer specifications
- Technical specifications
- Installation resources
- Mobile application user guide
- Technical support & warranty
- Safety advice & FCC regulations
- AP1 ADAS disclaimer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Sensata AP1 Video Telematics User Guide
Package contents
Key functions
Automatic Booting Once the AP1 has been wired to your OBDII port or vehicle power source, the AP1 will boot up automatically. It will take around 55 seconds for the unit to be ready to operate.
-
1. Video recording
Continuous record This is the default mode for recording. Your AP1 begins recording after booting up and continues to record the entire time the device is on. In this mode, the microSD card storage may fill up quicker and overwrite your oldest recordings when it’s full. The resolution and frame rates can be set as per your requirements.
Event record The unit will record when triggered by impact, various configurable driving events (e.g., speeding or forward collision) or events triggered by the “Panic” (Rec) button. You can set the record time during the calibration setting mode.
Dual record, continuous + event Continuous record files will be stored in the “Normal” folder, and event record files will be stored in the “Event” folder on the microSD card.
Drive data DRV data (drive data) will record driving information regardless of events. DRV files consist of GPS, G-sensor, ADAS and OBD data. DRV files overwrite your device’s oldest data. DRV files upload to the server every 10 minutes by default but can increase to every minute.
Time and date This information will be provided by GPS satellites automatically. -
Wi-Fi
To connect to the device via Wi-Fi, please press the “multifunction” button and hold for 5 seconds (long press), wait 3 seconds and then connect directly to the AP1 via Wi-Fi using your mobile device. -
Volume control
Please press the volume button to control. The volume level is 1 to 5.
ADAS functions
Your AP1’s Advanced Driver Assistance Systems (ADAS) features allow drivers to receive in-cabin preventive audio alerts in cases of potential incidents.
Caution
ADAS functionality is not a substitute for an alert, trained and engaged
driver. ADAS functionality will be impaired by many things, including but not
limited to device malfunction, obstruction of the device’s image sensor,
intense weather conditions that reduce the visibility afforded to the device’s
image sensor, and poor and/or faded road and lane striping/markings.
Driver safety warnings
Disclaimer
The AP1 is not a substitute for a safe, conscientious driver. The AP1 cannot
compensate for a driver who is distracted, inattentive or impaired by fatigue,
drugs or alcohol. Whether or not the AP1 is in use, it is always the driver’s
responsibility to take appropriate corrective action. It does not eliminate or
decrease the need for a driver to stay alert and to obey all traffic laws
while operating a vehicle. Never wait for the device to provide a warning
before taking measures to avoid an accident. Failure to do so can result in
serious personal injury or death or severe property damage.
Always, it is the driver’s responsibility to:
- Use safe driving techniques
- Exercise proper judgment
- Maintain a safe speed and distance between vehicles
- Take measures to avoid an accident
- Comply with all applicable laws and regulations
The driver and front passenger must always be correctly seated with seat belts fastened when operating the vehicle to reduce the potential danger of injuries.
Operational concerns
In certain conditions, including inclement weather, low visibility and certain
road conditions (including poor lane markings, construction zones, dirt roads,
heavy or complicated traffic, and curvy and winding roads), the AP1 may have
limited to no functionality. The AP1 may not detect certain objects such as
motorcyclists, bicyclists or pedestrians even in the most ideal conditions.
Always keep the lens and view of the AP1 unobstructed and properly calibrated
so as not to inhibit function. Driving in certain conditions or any
interference with the AP1 can result in false, few or no warnings. The driver
must always monitor traffic and surroundings and take measures to avoid an
accident; failure to do so can result in serious personal injury or death or
severe property damage.
If the AP1 is not functioning properly at any time, please contact your distributor or visit support.smartwitness.com and have the device inspected immediately to correct the issue. Whether or not the AP1 is functioning, it is the driver’s responsibility to maintain vehicle control; failure to do so can result in serious personal injury or death or severe property damage.
Cleaning advisory
While cleaning the device or the vehicle cab, do not apply compressed air or
cleaning solutions (such as Windex) to the AP1 device. Usage of these products
may cause damage to the device.
GPS reception
When satellites don’t have line of sight, cellular towers help triangulate a vehicle’s location.
Improve your signal
- Activate your AP1 in an area without large buildings.
- The optimum operating temperature for your vehicle’s GPS is -10°C~50°C
- When first using your AP1 or turning it on after a period (>3 days), allow more time to recognize your current location.
- This product supports Assisted GPS.
Reception may be impaired:
-
If your vehicle has metallic elements on the windshields.
-
If you install equipment generating electromagnetic waves that interfere with the GPS signal in the vehicle (ex: Other GPS devices like certain wireless activated alarms, MP3 and CD players and camera alarms use GPS.)
-
On heavily overcast or cloudy days if the vehicle is:
• In a covered place such as under a bridge or raised roadway
• In a tunnel
• In an underground roadway or a parking area
• Inside a building or garage
• Surrounded by high-rise buildings -
If GPS signal reception is poor. It may take longer to locate your current position when the vehicle is moving than when it’s stationary.
LEDs & buzzer specifications
Technical specifications
Installation resources
The AP1 is a self-install device for a vehicle’s OBDII connection. Please reference the AP1 install material and find access to the AP1 Mobile App on https://smartwitness.com/ap1-setup.https://qr.page/g/qbebmjTzS1
If you need to schedule a fee-based professional installation service, please contact smartwitness.com/request-install and submit the online form.
Watch AP1 Installation Videohttps://apps.apple.com/app/kp2-installer/id1610816200https://play.google.com/store/apps/details?id=com.smartwitness.kp2installer&hl=en_US&gl=US
Mobile application user guide
The AP1 Calibration Tool allows customization of AP1 settings on either Apple or Android devices. If you have installed AP1s, are familiar with its settings or require specific changes, use Advanced Setup. Adhere to the Guided Setup in any other case.
The following features the AP1 Tool Advanced Setup. Find Guided Setup instructions in the Quick Start Guide.
Technical support & warranty
Technical support
For technical support, please contact your local distributor or visit our
Support Portal and submit a support
ticket.
You can also email us at support@smartwitness.com or call our support team:
North America, South America, APAC +1 312-981-8774
EMEA +44 (0) 1483 397005
Limited warranty This product is supplied separately with a 2-year limited hardware warranty.
The warranty excludes products that have been misused (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Safety advice & FCC regulations
FCC Part 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
Caution To reduce the risk of electric shock, do not remove cover. No user-
serviceable parts inside. Refer servicing to qualified service personnel.
Please make sure you follow the safety advice/instructions given in the user
guide.
Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Battery for real-time clock (RTC) inside.
Caution Install the product where it does not block driver’s visibility and where there is no air bag installed. This could cause an accident or might injure passengers in case of accident.
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.
Caution Damages due to production malfunction, loss of data or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the shock when the impact is light, and as a result, it may not begin recording automatically.
Caution
Please make sure you follow the safety advice/instructions given in AP1
instruction materials.
AP1 ADAS disclaimer
To properly activate and utilize AP1’s ADAS features, Sensata INSIGHTS recommends installation using OBDII data or JBUS connection. Vehicle-sourced speed data retrieval through these means is integral to accessing vehicle speed for precise ADAS notifications.
For installations (ex: 3-Wire) without vehicle data retrieval or in instances where speed is unobtainable from the vehicle, AP1 defaults to GPS speed measurement in the operation of ADAS features. In this case, vehicles must surpass a speed threshold to trigger ADAS functions. This threshold is distinct from other speed thresholds used to configure ADAS events. Please contact your Sensata INSIGHTS integration team to learn about specific values for different event types. Below these thresholds, and in cases where vehicles without vehicle-sourced speed data encounter GPS signal “dead zones” like parking garages and highway tunnels, loss of ADAS function is expected.
If you enable ADAS features on an AP1, you assume full responsibility and
indemnify Sensata INSIGHTS for any incidents directly correlated with ADAS
efficacy, malfunction or delays.
References
- Telematics & Data Analytics | Sensata INSIGHTS
- Telematics & Data Analytics | Sensata INSIGHTS
- Knowledge Base
- AP1 Setup | Sensata INSIGHTS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>