ELK Home H0019-10385 Alcott 21.5 Inch High 1-Light Table Lamp Instructions
- June 9, 2024
- elk HOME
Table of Contents
ELK Home H0019-10385 Alcott 21.5 Inch High 1-Light Table Lamp
Safety Instruction
WARNING:
This fixture is intended for installation in accordance with the National
Electrical Code (NEC) and all local code specifications. If you are not
familiar with code requirements, an installation by a certified electrician is
recommended.
CAUTION:
To prevent shock, only plug in the lamp after the lamp assembly is complete.
WARNING:
This portable lamp has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Never use an extension cord unless
the plug can be fully inserted. Do not attempt to work around this safety
feature.
Before assembly, remove all parts and part packages from the box. If anything is missing, please contact the retailer from which the product was purchased.
Assembling
- Squeeze ends of harp (B) inward. Insert each end of harp (B) into each end of saddle (D). Lower harp caps (C) over ends of saddle (D).
- Lower shade (E) down over harp (B). Pass hole in the top of shade bracket over the threaded stud on top of harp (B).
- Carefully screw the finial (F) onto the threaded stud on harp (B). Tighten finial (F) to secure shade (E) in place. DO NOT over-tighten.
- Insert recommended bulb (not included)into the socket (A).
WARNING: Verify the correct bulb wattage marked on the socket of the lamp. DO NOT exceed maximum bulb wattage.
Contact
elkhome.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>