eve 10EAZ8301 Energy Strip User Guide

eve 10EAZ8301 Energy Strip

Safety Instructions

• Do not connect appliances to this remote controlled socket-outlet if the instruction manual of the appliances prohibits being remote controlled (for example appliances according to EN 60335-2-9 like grills, toasters and similar portable cooking appliances, or portable kitchen appliances, or appliances with heating elements like ovens or heaters, etc.).
• Do not connect any appliances to this remote controlled socket-outlet which are radiating heat and may cause ignition or burning of surrounding materials (for example radiation heaters, portable heaters, portable floodlights, desk lamps, etc.).
• Take into consideration that connected appliances might be moved by pets, cleaning staff or other persons who are not aware of the remote control functions.
• Do not connect any appliances with potential hazards by moving parts (for example drills, table saws, blenders, etc.).
• The connection/installation of this product should be in a suitable area with the remote controlled socket-outlet easily readable and accessible for disconnection actions.
• Do not cover when in use.
• Only voltage free if the plug is pulled. Do not connect in series.
• Because of the extremely high energy level at a direct lightning strike, absolute protection of the connected devices cannot be guaranteed.

Specifications

• Total current rating: 16 A, 230 V (3.680 W)

• Overvoltage protection: 264 V

• Overcurrent protection: 16,2 A

• Thermal circuit breaker: 16 A

• Transient voltage surge suppression: Yes

• Child protection: Yes

• UOC: 5 kV

• UP: 1,2 kV (L-N, L-PE, N-PE)

• One-port SPD

• Short-circuit current rating ISCCR: 1.500 A

• Type of LV systems: TN system

• Residual current IPE: 0,15 mA

• Length of power cord: 188 – 196 cm

• Operating humidity: 5 % to 95 %, non-condensed

• Ambient air temperature: 0 °C – 35 °C

• Pollution degree: 2

• Rated impulse withstand voltage: 2,5 kV

• Number of operating cycles: 10.000

• Circuit disconnection: Micro-disconnection

• Continuous duty

• Glow-wire temperature: 750 °C

• Type of load: Resistive load

• Type and/or connection of switch:
  Single pole/Single load

• Frequency Range: 2412 – 2472 MHz

• Max. RF Power (EIRP) < 18.11 dBm

• Standby Power Consumption: < 2 W

Get started

Plug Eve Energy Strip into an outlet.

Download the Eve app from the App Store.

Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.

If you have already set up another accessory, go to Settings in the Eve app to add Eve Energy Strip to your home.

Enjoy

Control devices connected to Eve Energy Strip via the app or Siri.

You can also use the onboard buttons to control devices connected to Eve Energy Strip.

Surge Protection

The white LED remains illuminated to indicate that surge protection is fully functional.

If an electrical surge is detected, the fuse on the side of Eve Energy Strip will eject and the protection indicator LED will turn off.
To resume operation, unplug Eve Energy Strip and reinsert the fuse.

Mounting

Use only M4x25 mm screws for mounting.

Reset

Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.

Hereby, Eve Systems declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at www.evehome.com/doc

Product: 10EAZ8301 • Model: 20EAZ8301 • Part: 51EAZ8304

Room____

Notes ____

References

• Declaration of Conformity | evehome.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>