eve 51ECE4101 Light Switch Smart Home Wall Switch User Guide
- June 4, 2024
- eve
Table of Contents
Get Started
www.evehome.com/install-lightswitch
51ECE4101 Light Switch Smart Home Wall Switch
Eve Light Switch requires a neutral wire and replaces a single-pole or
3-way switch. Only for use with copper or copper-clad wire in dry, indoor
locations.
If you are unsure or uncomfortable about installing Eve Light Switch,
consult a qualified electrician. To be installed and/or used in accordance
with appropriate electrical codes and regulations.
Min. 3 W; Max. 1800 W/ 15 A (resistive),
600 W/ 5 A (incandescent/tungsten), 120 VAC
-
Turn off the power at the circuit a breaker that controls the light switch. Ensure power is off by switching your existing light switch on and off multiple times.
-
Remove your existing wall plate and light switch. Only proceed with the installation if there is a neutral wire (usually white) in the switch box.
-
Replace a single-pole switch
Replace a 3-way switch
-
Mount Eve Light Switch into the wall.
-
Screw in the snap plate (5a) and push the face plate o n t o it (5b). Alternatively, use your existing wall plate.
-
Turn on power at the circuit breaker that controls the light switch.
Tap Eve Light Switch – your lights should now turn on.
If your lights do not turn on, your live and load wires might be swapped. Turn off the power at the circuit breaker and try swapping them.
-
Download the Eve app from the App Store.
-
Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process.
If you have already set up another accessory, go to the Eve settings to add Eve Light Switch to your home.
Eve Light Switch can be controlled using the Eve app, the Home app, and Siri.
| | Control
---|---|---
| View time and duration statistics
| Set schedules (no home hub required)
| Adjust status LED
| Install firmware updates
You can also tap Eve Light Switch to turn your lights on and off. 
Enjoy
Schedules automatically control your lights – completely autonomously, independently of your iPhone or home hub. Set schedules that match your daily routine using the Eve app.
Securely access Eve Light Switch while you’re away from home and set up powerful automation. Any Apple TV HD, Apple TV 4K or HomePod using the same iCloud account as your iPhone will automatically serve as a home hub, no further setup is required.
Eve is designed to safeguard your personal data. All data is fully encrypted and only transferred directly between your Eve Light Switch and iPhone, iPad, or home hub.
Learn more at evehome.com/privacy
Legal Information
This device complies with part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of
the following measures: reorient or relocate the receiving antenna; increase
the separation between the equipment and receiver; consult the dealer or an
experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RE, IC RSS-102, and CE radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the
radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Eve Systems could void your
authority to operate this device.
For questions about Eve product compliance with FCC regulations, please
contact Compliance Officer, Eve Systems, 100 Pine St., Suite 1250, San
Francisco CA 94111, USA. Purpose of control: operating control;
construction of control: independently wall mounted control; type 1 action;
operating time: continuous; control pollution degree 2; frequency range: 2402
– 2480 MHz (BLE) / 2405 — 2480 MHz (Thread); max. HIV: 10 dBm; temperature
range 32 °F — 104 °F; rated impulse withstand voltage: 2.5 kV Product:
10ECE4101 • Model: 20ECE4101 • Part: 51ECE4101 • FCC ID: SNE-ELS-003 • IC:
11192A-ELS003
Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.
Notes Remarques
Documents / Resources
| eve
51ECE4101 Light Switch Smart Home Wall
Switch
[pdf] User Guide
51ECE4101 Light Switch Smart Home Wall Switch, 51ECE4101, Light Switch Smart
Home Wall Switch, Wall Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>