eve 1ED109901001 Door and Window Wireless Contact Sensor User Guide
- June 4, 2024
- eve
Table of Contents
**door & window
Get Started
**
Get started
①
Insert the included ½ AA battery and place Eve Door & Window so that the areas
marked with dots are facing each other. Use the included spacers to bring the
small element to the ideal height.
The built-in LED will light up each time Eve Door & Window detects an
open/closed state change, so you can be sure everything works as expected
before attaching the adhesive firmly.
If you want to replace the ½ AA (ER14250 3.6 V) battery, simply pull the
larger element downwards – no need to remove and re-attach the carefully
positioned adhesive.
②
Download the Eve app from the App Store.
③
Open the Eve app and tap Add Accessory. Eve will now guide you through the
setup process.
If you have already set up another accessory, go to the Eve settings to add Eve Door & Window to your home.
Enjoy
Access Eve Door & Window using the Eve app, the Home app, and Siri.
| See the current open/closed state
---|---
| View time and duration statistics
| Rules
| Install firmware updates
| See the current open/closed state
---|---
| Configure notifications
| Configure guest access
| Ask the current open/closed state
---|---
Securely access Eve Door & Window while you’re away from home and set up
powerful automation.
Any Apple TV HD, Apple TV 4K or HomePod using the same iCloud account as your
iPhone will automatically serve as a home hub, no further setup required.
Eve is designed to safeguard your personal data. All data is fully encrypted
and only transferred directly between your Eve Door & Window and iPhone, iPad
or home hub.
Learn more at evehome.com/privacy.
Legal Information
This device complies with part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, you are encouraged to try to correct the interference by one or more of
the following measures: reorient or relocate the receiving antenna; increase
the separation between the equipment and receiver; consult the dealer or an
experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 centimeters between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
For questions about compliance with FCC regulations, please contact Compliance
Officer, Eve Systems, 100 Pine St., Suite 1250, San Francisco CA 94111, USA.
UK Authorised Representative: Authorised Representative Service, The Old
Methodist Chapel, Great Hucklow, SK17 8RG, UK
Hereby, Eve Systems declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EC.
The declaration of conformity is available at
www.evehome.com/doc
Frequency range: 2402 – 2480 MHz (BLE) / 2405 – 2480 MHz (Thread);
EU: max.
EIRP: 10 dBm;
temperature range: 0 °C – 40 °C
Product: 10EBN9901
Model: 20EBN9901
Part: 51EBN9902
FCC ID : SNE-DOOR-003
IC ID: 11192A-DOOR003
Reset
Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy.
door & window
Room………………………………………………………………………………………..
Notes………………………………………………………………………………………..
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>