StarTech Com DKT31CVHPD3 USB-C Multiport Adapter User Guide
- June 9, 2024
- StarTech com
Table of Contents
USB-C Multiport Adapter – HDMI 4K 60Hz HDR10 or VGA – 3 x USB (10Gbps) –
100W PD –
Extended Cable
Quick-Start Guide
Product ID
DKT31CVHPD3
Product Diagram (Side A)
| Component | Function | |
|---|---|---|
| 1 | Built-in USB-C Host Cable | •Connect to a USB-C Port on a Host Computer |
•USB 3.2 Gen 2 (10 Gbps)
•Power Delivery 3.0 Specification
2| USB-C Data/Charge Port| •Connect and/or charge a USB-C Peripheral
•USB-C Power Adapter required for charging
•USB 3.2 Gen 2 (10 Gbps)
•Supports 5V/3A (15 W) charging
3| 2x USB-A Data/ Charge Ports| •Connect and/or charge USB-A Peripherals
•USB-C Power Adapter required for charging
•USB 3.2 Gen 2 (10 Gbps)
•Supports BC 1.2 5 V/1.5 A (7.5 W) charging
4| VGA Output Port| •Connect a VGA Display Device
•Up to 1080p (1920×1200/1920×1080) 60 Hz
•Via DisplayPort 1.4 DP Alt Mode
5| HDMI Output Port| •Connect an HDMI Display Device
•HDMI 2.0b HDR10
•Up to 4K (4096×2160) 60 Hz
•Via DisplayPort 1.4 DP Alt Mode
6| USB-C 100 W Power Delivery Port| •Connect a USB-C Power Adapter
•USB Power Delivery 3.0 (up to 100 W, with up to 84 W available for charging)
Requirements
- Computer
- DP Alt Mode enabled USB-C Port
For the latest drivers, manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/DKT31CVHPD3
Package Contents
- USB-C Multiport Adapter x 1
- Quick-Start Guide x 1
Installation
Side A Ports
-
Connect the Built-in USB-C Host Cable, located on the Multiport Adapter, to a USB-C Port on your Host Computer. Your Host Computer will automatically detect
the Multiport Adapter and install the required drivers. -
Connect a USB Peripheral Device to the USB-C Data/Charge Port, located on the Multiport Adapter.
Notes:
• Power and charge the connected Peripheral Device with up to 5 V/3 A (15 W).
• A USB-C Power Adapter must be connected to the USB-C 100 W Power Delivery Port, located on the Multiport Adapter, to charge Peripheral Devices.
• Without a Power Adapter connected, the USB-C DATA/Charge Port will output whatever bus power is available, up to 4.5 W. -
Connect USB Peripheral Devices to the USB-A Data/Charge Ports, located on the Multiport Adapter.
Notes:
• One of the USB-A Data/Charge Ports is located on Side B.
• Power and charge the connected Peripheral Devices with up to 5 V/1.5 A (7.5 W).
• A USB-C Power Adapter must be connected to the USB-C 100 W Power Delivery Port, located on the Multiport Adapter, to charge Peripheral Devices.
• Without a power adapter connected, the USB-A Data/Charge Ports will output whatever bus power is available, up to 4.5 W.
Side B Ports -
Connect a VGA Enabled Display Device to the VGA Output Port, located on the Multiport Adapter, using a VGA Cable.
-
Connect an HDMI Enabled Display Device to the HDMI Output Port, located on the Multiport Adapter, using an HDMI Cable.
Notes:
• This Multiport Adapter supports a single video signal output. If displays are connected to both the HDMI and VGA Video Outputs, the Host Computer operating system will detect only one display, and both displays will show the same output.
• The computer’s USB-C port must support DP Alt Mode to output video.
• Video performance, such as resolution, and refresh rate depends upon the connected Host Computer’s video controller. Please verify the specifications of the Host Computer.
Side C Port -
Connect a USB-C Power Adapter (up to 100 W) from an AC outlet to the USB-C 100 W Power Delivery Port on the Multiport Adapter, to charge the laptop that’s
connected to the Built-in USB-C Host Cable.
Note: The Multiport Adapter reserves 16 W of power, with up to 84 W available for charging your Host Computer
Regulatory Compliance
FCC — Part 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• • Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• • Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by
StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols This manual may make reference to trademarks, registered trademarks,
and other protected names and/or symbols of thirdparty companies not related
in any way to StarTech.com. Where they occur these references are for
illustrative purposes only and do not represent an endorsement of a product or
service by StarTech.com, or an endorsement of the product(s) to which this
manual applies by the third-party company in question. StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Warranty Information
This product is backed by a 3-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada| StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.| StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills,
Northampton
NN4 7BW
United Kingdom| StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp,
The Netherlands| FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
---|---|---|---|---
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>