PTM W2S TWS bluetooth 5.0 Earphone LED Display HiFi Stereo-Complete Features-Operational Manual
- June 4, 2024
- PTM
Table of Contents
PTM W2S TWS Bluetooth 5.0 Earphone LED Display HiFi Stereo
Specifications
-
Microphone
Yes -
Bluetooth Version
V5.0 -
Transmission Distance
10m -
Impedance
16Ω -
Frequency Response
20-20kHz -
Charging box
1800mAh, 3.7V -
Earphone
40mAh*2, 3.7V -
Charging Time (h)
1h -
Taking Time
3-4h -
Material
ABS+ PC -
Wearing Type
In-ear -
Brand
PTM
Introduction
A reliable connection and minimal power consumption are all features of BT 5.0. Left and right ear channels are separated in the TWS Wireless dual ear design. You can use the headsets individually or in pairs. Never worry about your headphones running out of energy again with this 2000mAh battery box.
What’s In Box?
- 1 PTM W2S TWS Bluetooth 5.0 Earphone with Charging Box
- 1 USB Charging Cable
- 2 pairs of Eartips
- 1 Manual
Features
- Clear LED digital display that allows you to quickly determine the power status of the charging box and headphones.
- A small power bank is more portable than a large one.
- stereo audio in hi-fi. Bluetooth 5.0, clever noise reduction, HD call, and stutter-free stereo sound.
How do I charge my earbuds and the charging case?
earbuds being recharged
Close the charging case’s cover after putting the earbuds inside. The battery
LED within the charging case is red, yellow, or green when the lid is open to
show the earbuds’ current battery state.
The earphones need about two hours to fully recharge. If the battery is low, you can extend its life by 10 to 20 minutes by charging it in the charging case.
The charging case being charged
Connect the charging case to an approved wall charger or USB power source. The
charging case and earbuds take around two hours to fully charge.
How To Pair Earbuds
- Make your Bluetooth gadget discoverable by turning it on.
- Choose Start, enter Bluetooth, and then choose Bluetooth settings from the list.
- Activate Bluetooth, choose the target device, and pair.
- If there are any instructions, heed them.
Frequently Asked Questions
Can TWS connect a certain number of devices?
Usually just one. The multipoint feature of the earbuds allows for simultaneous connection to two devices. However, only one device can simultaneously stream audio to the earbuds.
Why won’t my earbuds function on TWS?
Depending on the audio settings on your headset, it might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
A TWS lasts for how long?
A conventional Bluetooth audio device can be purchased for between and should last for four to five years. With TWS earbuds, such is not the case, and the device is worthless if you lose either of the buds.
TWS supports up to two devices.
The true wireless stereo (TWS) earphones will be able to easily switch between two connected devices depending on the audio source thanks to the dual connection mode.
TWS Bluetooth: What is it?
Bluetooth signals are used in True Wireless Stereo (TWS) to transmit sound instead of wires or cables. TWS is distinct from wireless accessories that do not rely on physical connections to media sources but still require such connections to make sure that various components of a device can work together.
When TWS earbuds aren’t charging, how do you fix them?
Forgetting to turn on the switch can be the most frequent issue with this. There are, however, additional, grave causes as well: Both the charging case and the TWS earphones’ connectors should be cleaned. Examine the cable, adapter, and power outlet for damage and problems with the power supply.
How long does it take for TWS earbuds to charge?
The earphones need around two hours to charge completely. If the battery is low, charging it for 10 to 20 minutes in the charging case can extend your use by an hour. Connect the charging case to an authorized wall charger or USB power source.
How long are earbuds good for?
Contrary to popular belief, premium wireless earbuds can last up to 5 hours of continuous use without a case. When it comes to power efficiency, the portable charging case has actually made a significant improvement, increasing the talk or gameplay to as much as 20 hours.
How are TWS earphones recharged?
Connect the charging case to an approved wall charger or USB power source. The charging case and earbuds take around two hours to fully charge. Note: Charge times may be greater with uncertified chargers.
Without a case, how do TWS earbuds get charged?
You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro USB. After that, you must wait while your earbuds fully charge.
Why does one TWS earbud function but not the other?
Your wireless earphones might only work on one side since the initial setup of the earbuds may not have gone smoothly. Other causes include a glitch (which necessitates a manual reset), the necessity to Bluetooth reconnecting to your other device, and genuine hardware damage.
How can I tell when my earbuds have finished charging?
When your AirPods Pro or AirPods (3rd generation) are charging (showing an amber light) or fully charged, you may check by tapping the case while it’s on the charging pad (green light)
Why won’t my earbuds charge anymore?
Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge.
How are TWS earbuds reset?
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.