T Y TY-RC01 Remote Control User Guide
- June 5, 2024
- T Y
Table of Contents
T Y TY-RC01 Remote Control
Overview
This TY-RC01 remote control is designed to be used with T&Y’s portable series
teleprompter products, TY-TT, TY-KY03, TY-MT.
In order to better work with our teleprompter, we carefully selected
teleprompter apps from the market, and finally selected DV prompter to match
our products. DV Prompter app Is a FREE download from the Apple app store and
Google Play.
Pairing to your tablet/ smart phone device
Switch the Bluetooth function ON within the tablet/ smart phone device
settings.
Open the DV Prompter app and choose Bluetooth-WR-500 in the Remote setting.
Press the above top Play/Pause button, the light on the top of the TY-RC01
will now flash repeatedly several times to indicate that it is ready to pair
with the tablet/ smart phone. Once paired a Bluetooth icon will be displayed
in the lower right corner of the app.
Note :
The remote will sleep after 5 minutes of inactivity to save battery life.Press
the play/pause button to wake the remote and it will automatically try to re-
pair with the tablet previously used.
Control method
While scrolling text
- ‖：Pause text
- 、▼：Speed up / slow down text scroll
- 、▶：Reduce / increase font size While text paused
- ‖：Play text
- 、▼：Skip next / previous break marker
- 、▶：load previous / next script
- Loading battery
TY-RC01 CR2032 button battery, due to transportation reasons, the original
battery is not equipped.
Please use a screwdriver to remove the screws on the rear bottom case, then
remove the battery compartment cover and install the battery.
Note : The positive and negative poles of the battery are installed
correctly
FAQ
Q1: What system can the remote be used with? Apple or Android?
A1: It will work with all Apple and most Android tablet and smart phone
devices.
Q2: Can this remote work with other apps?
A2: The remote has no compatibility in other, third party, applications.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.to the following two conditions:
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>