Shenzhen Yingkeda Technology GT02 Smartwatch Instruction Manual

Shenzhen Yingkeda Technology GT02 Smartwatch

Key definition

Instruction for Use

Charging schematic
Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time.

Tip: Wearing too loosely may affect the accuracy of heart rate data.

Bind Watch

Download and install App
You can set up the watch through the OyeFit app for iOS or Android devices. The steps are shown as follows:
Notes : The hardware platform of the equipment system shall meet requirements.

Bind process

• please charge to activate the watch before you use it.
• Check the Bluetooth address in the settings-about of the watch.
• During the binding process, OyeFit” prompts you to enable GPS and Bluetooth, and authorize “OyeFit” to get access to the GPS onyour mobile phone.
• After binding the Apple phone, you need to pair the GT02 watch with the phone’s Bluetooth so that the watch can provide various information.

Synchronous Data

The data is synchronized in real time.and the sports mode can save a biece of sports information shown as follows:

Main interface operation

Swipe the screen to enter different interfaces.

Function Introduction

• Enter the sports menu, you can choose different sports modes.
• Can monitor your heart rate (real-time monitoring of the heart rate switch, please turn on the APP)
• Before use, please calibrate the compass.
• Monitoring blood oxygen levels.
• Control music play on your mobile phone (watch cannot store music)
• Real-time display of weather and temperature in the area.
• For the information prompt, set it in the APP in advance to display synchronously.
• After connecting the device can remote control the camera. on your phone.
• Stopwatch
• Set the function
• Breath training
• Timer
• Activity status of the day
• Female menstrual cycle
• Exercise record
• Monitor sleep quality.
• Turn on the flashlight, the screen can be used as a backup light source.
• The alarm function only supports setting time on the App.
• Notes: For more functions and operations, please check the “OyeFit” software of the mobile.

Start sports

1. Enter sports-type > enter the sports automatic timing.
2.  During sports. Pause motion: Long press the key, prompt pause/restore, click Restore. Exercise: Click to resume exercise.
3.  Stop exercise: Remind whether to end this exercise Select “Yes”.

Heart rate test

Note: Please wear the strap tightly to test accurately when testing heart rate.

Product Parameters

voltage

| 5V±0. 2V
Charging time| about 2.5 hours| Battery life| 7-15days
Waterproof level| 5ATM| Weight of

product

| 43.2g
Operating

temperature

| -20℃- 45℃| |
GPS| ****

With GPS

| sensor| Accelerator sensor Geomagnetic sensor Optical heart rate sensor
Range of charging temperature: 10℃-45℃

Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.

Waterproof: Not suitable for diving, swimming in the sea, or sauna.

But suitable for swimming in swimming pool or in shower (cold water) and shallow beach.

Cleaning and Maintenance

It is recommended to wear and maintain according to the following three points:

1.  Keep the product clean;
2.  Keep the product dry;
3.  Do not wear it too tight.
   Do not use household cleaners to clean the watch, but use soap-free detergent.
   It is recommended to use alcohol to scrub stains that are not easy to remove.

Frequently Asked

Handy APP does not search for watches

1. I t is recommended to use Bluetooth after the Restart the phone and restart then connect again.
2.  We recommend using all programs close, then the Bluetooth restart and connect heart.
3.  check your cellphone system Android 4.4 or IOS 8.0 and higher Versions meet.

The watch received no alerts, text messages

1.  You need to turn on the smart reminder function and the call reminder switch in the APP and synchronize to the watch.
2.  The phone needs to be paired with the watch via Bluetooth.
3.  You need to keep your watch connected to Bluetooth.
   Note : The Android system may not be able to display the name of the caller due to some national policy approval applications. The IOS system can display the name of the caller normally.

Bluetooth is often disconnected

1.  If the distance between the watch and the mobile phone is too far, the connection effect of more than 10m Bluetooth is obviously weakened.
2.  Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the Bluetooth connection signal.
3.  Whether the Bluetooth function of the mobile phone is abnormal.

How to restart: Restart mode: long press the key, prompt whether to restart/shut down, select restart。

Do I need to keep my Bluetooth on when I wear my watch?

1.  For the three functions, i.e. counting steps, sleeping, and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
2.  For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s Bluetooth, and maintain the connection with the mobile phone.

How to set the watch time

After opening the APP, opening the Bluetooth, and connecting the watch, the time will be automatically synchronized. More detailed questions can be answered with help and feedback in the APP.

Safety and Product Information Notes

Battery warning
Do not disassemble, bore, or damage the battery. Do not disassemble the built- in batteries of non-replaceable battery devices. Do not use sharp objects to remove the battery.

Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap. The optical heart rate sensor of the watch glows green and blinks.
If you have epilepsy or are sensitive to flashing light sources, please consult your doctor if you can wear this product. The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities. such as steps, sleep, distance, heart rate, and calories, but may not be completely accurate. The device, accessories, heart rate sensors, and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment, or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.

Cycling Warming Please maintain good judgment at all times and ride in a safe manner. Make sure your bike and hardware are properly maintained,.The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquids. The damage or defects caused by misuse or improper use are not covered by the warranty. Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry when your heart rate is measured, keep your arm still during the test.

Caution
Rise of explosion if the battery is replaced by an incorrect type dispose of used batteries according to the instructions. Provided to protect the battery from extreme conditions or user abuse. Examples that shall be considered include:

•  disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
•  leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
•  a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>