ETERNICO AET-TB180SB Pro Trackball Dual Mode Mouse User Manual
- June 9, 2024
- ETERNICO
Table of Contents
User Manual
Ergonomic Optical Mouse
AET-TB180SB
AET-TB180SB Pro Trackball Dual Mode Mouse
THANK YOU FOR CHOOSING US
We value your trust We hope that you will be happy with our product, and as
excitad about it as we are. We try to offer products of the highest quality
that satisfy even the most demanding requirements. If you are satisfied, it
would make us very happy if you chose us again the next time you make a
purchase. We are environmentally conscious, therefore we use special eco-
friendly packaging. Please recyclel
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product, So how are we different?
Packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made fram 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose
only water-soluble ones.
We think globally, which means that we actively search for eco-hiendly
solutions. We keep an eye on trending technology and place findings of the
scientific community into practice. We don’t just try to meet quotas and
mandates, we aim to exceed them.
**** THIS PACKAGE IS 100% RECYCLABLE.
TECHNICAL PARAMETERS
| Connection | USB receiver/Bluetooth |
|---|---|
| Power | DC 5 V, 0.3 A Li 3.7 V, 500 mAh |
| Sensor resolution | 100/200/400 (default)/800/1,200 DPI |
| Sensor type | Optical |
| Interface type | USB |
| Wireless range | 10 m (2.4 G); 8 m (Bluetooth) |
| Maximum number of paired devices | 3 |
| Polling rate | 250 Hz (2.4 G); 115 Hz (Bluetooth) |
| Dimensions | 138 x 74,5 x 68 mm |
| Weight | 147 g ± 10 g |
OVERVIEW
- Left mouse button
- Side buttons forward / backward
- Trackball
- Right mouse button
- Centre wheel
- DPI button (sensor resolution setting)
- Mode switch
- USB receiver
- ON/OFF switch
INSTRUCTIONS
Charging the mouse
The mouse must be charged before the first use. Insert the connector of the
supplied USB cable to the charging port and the second connector to the USB-A
input of your computer. The mouse can be used while charging. If the LED
indicator lights up during the using, it is necessary to charge the mouse.
Turning mouse On/Off
Turn the power switch on the bottom of the mouse to the “ON” position to turn
on the mouse. The LED indicator BT1 flashes slowly. The default operating mode
is BT1.
Operating mode selection
The wireless mouse allows you to set the operating modes to 2.4 G, Bluetooth 1
or Bluetooth 2. To select an operating mode, press the operating mode
selection button at the bottom of the mouse repeatedly in the following order:
BT1 – BT2 – 2.4 G. The default operating mode is BT1.
2.4 G operating mode
Turn on the mouse and press the operating mode selection button to select 2.4
G mode. LED indicator will flash slowly. Insert the USB receiver into the
USB-A port of your computer. The mouse is installed automatically so you can
control the mouse quickly and comfortably.
Bluetooth operating mode
- Turn on the mouse. The default operating mode is BT1 and LED indicator will flash slow-ly. Press the operating mode selection button repeatedly to select the BT1 or BT2 mode.
- Press and hold the operating mode selection button for more than 3 seconds to enter the pairing process. The LED indicator will flash quickly.
- On your computer, click “Add Device – Bluetooth” to start the device search.
- Select “BT5.0 Mouse” or “BT3.0 Mouse” from the searched devices and confirm for pairing.
- If the pairing was successful, the mouse cursor will appear on the display.
Sensor resolution setting
Press repeatedly the DPI button to select the sensor resolution:
100-200-400-800-1200 DPI. The default
setting is 400 DPI.
CLEANING
Keep the wireless mouse clean. Turn the switch to the “OFF” position before cleaning. Use only a dry, clean cloth for cleaning. Do not use harsh cleaners, solvents, gasoline or other similar substances. Never wash the wireless mouse with water and do not immerse it in water.
SAFETY INFORMATION
- Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device. And it may void your warranty.
- This product is only suitable for household use.
- This product is not a toy. It may contain small components. Please keep away from children.
- Do not use or leave the product in a dusty or otherwise polluted environment.
- Do not leave the product in high or low ambient temperatures. Keep the product in a dry environment.
- Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
- Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
- Do not touch the product with wet hands.
- This product is not considered a light fixture. Make sure that continuous operation does not exceed six hours.
- Never look into the light for a long time. There is a risk of serious eye damage.
- Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury.
- Do not immerse the product in water or other liquids or throw it into a fire.
- Do not leave the product unattended while it is in operation.
- Avoid turning the product on and off frequently and repeatedly.
- While the product is in operation, it may become hot. This is a normal occurrence. There-fore, make sure that there are no heat-sensitive objects / surfaces near the product.
- If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
- Avoid overloading the product. Avoid dropping the product.
- Do not place any objects on the product. There is a risk of irreversible damage to the product.
- This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check it regularly for damage.
- Use only a soft, clean, dry cloth to clean the surface.
- Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substanc-es. Before cleaning, make sure that the product is disconnected from the power supply.
- Store the product in a dry and well-ventilated place. Do not place any objects on the prod-uct when in storage. Alza.cz, a. s. hereby declares that the radio device AET-TB180SB is in compliance with Directive 2014/53/EU.
DISPOSAL OF USED BATTERIES
Batteries contain materials harmful to the environment. Do not dispose of batteries in a regular community waste. Dispose of used batteries properly at collection points.
United Kingdom +44(0)203 514 4411
This product meets all of the related basic EU regulation requirements. The EU
dec-laration of conformity is available on
www.alzashop.com/DoC. This product sold in the
European Union meet the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS). The use of the WEEE Symbol indicates that this
product should not be treated as household waste. By ensuring this product is
disposed of correctly, you will help protect the environment. For more
detailed in-formation about the recycling of this prod-uct, please contact
your local authority, your household waste disposal service provider, or the
shop where you purchased the item. “For indoor use only” symbol indicates that
the product is not intended for outdoor use.
20220727
www.eternico.net
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2022 Alza.cz a.s. All Rights Reserved.