ETERNICO AET-MS460SB Wireless Mouse User Manual
- June 9, 2024
- ETERNICO
Table of Contents
ETERNICO AET-MS460SB Wireless Mouse
THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as
excited about it as we are. We try to offer products of the highest quality
that satisfy even the most demanding requirements. If you are satisfied, it
would make us very happy if you chose us again the next time you make a
purchase.
We are environmentally conscious, therefore we use special eco -friendly
packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they
are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to classic petroleum -based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose
only water -soluble ones.
We think globally, which means that we actively search for eco -friendly
solutions. We keep an eye on trending technology and place findings of the
scientific community into practice.
We don’t just try to meet quotas and mandates, we aim to exceed them.
TECHNICAL PARAMETERS
Connection | USB receiver / Bluetooth |
---|---|
Power | Li-Ion 3.7 V / 500 mAh |
Sensor resolution | 800 / 1,200 / 1,600 / 2,400 / 3,200 DPI |
Sensor type | Optical |
Interface type | USB |
Wireless range | 20 m (2.4 GHz); 10 m (Bluetooth) |
Dimensions | 118.64 × 76.97 × 46.2 mm |
Weight | 128 ± 2 g (without battery) |
OVERVIEW
- Left mouse button
- Centre wheel
- Side scroll wheel (only for Mac OS)
- Side buttons forward / backward
- Right mouse button
- DPI button (sensor resolution setting)
- Low battery LED indicator
- Charging port
- Button for switching operating modes
- Optical sensor
- ON/OFF switch
INSTRUCTIONS
Inserting and replacing the battery
The mouse must be charged before first use.
The low battery indicator will light up. When the light goes off, the battery
is fully charged.
If the low battery LED lights up during operation, the mouse needs to be
charged. You can use the mouse during charging.
Turning mouse On/Off
Turn the power switch on the bottom of the mouse to the “ON” position to turn
on the mouse. The LED indicator BT1 turns on. The default operating mode is
BT1.
Operating mode selection
The wireless mouse allows you to set the operating modes to 2.4 G, Bluetooth 1
or Bluetooth 2. To select an operating mode, press the operating mode
selection button at the bottom of the mouse repeatedly in the following order:
(operating mode 2.4 G) – BT1 (Bluetooth 1) – BT2 (Bluetooth 2). The default
operating mode is BT1 (Bluetooth 1).
2.4 G operating mode selection
Installation
Insert the USB receiver into the USB-A port of your computer.
The mouse is installed automatically so you can control the mouse quickly and
comfortably.
Bluetooth operating mode selection
If you will be using a wireless mouse in Bluetooth operating mode, you must
remove the USB receiver.
- Press the operating mode selection button repeatedly to select the BT1 (Bluetooth 1) or BT2 (Bluetooth 2) mode. The LED indicator of the selected mode lights up.
- Press and hold the operating mode selection button for more than 3 seconds to enter the pairing process. The LED indicator of the selected mode will flash. The pairing time is 3 minutes.
- On your computer, click “Add Device – Bluetooth” to start the device search.
- If the pairing was successful, the LED indicator of the selected operating mode will go out after approx. 2 seconds and the mouse cursor will appear on the display.
CLEANING
Keep the wireless mouse clean. Turn the switch to the “OFF” position before
cleaning.
Use only a dry, clean cloth for cleaning. Do not use harsh cleaners, solvents,
gasoline or other similar substances. Never wash the wireless mouse with water
and do not immerse it in water.
If you will not be using the wireless mouse for an extended period of time,
set the power switch to “OFF”.
SAFETY INFORMATION
- Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device. And it may void your warranty.
- This product is only suitable for household use.
- This product is not a toy. It may contain small components. Please keep away from children.
- Do not use or leave the product in a dusty or otherwise polluted environment.
- Do not leave the product in high or low ambient temperatures. Keep the product in a dry environment.
- Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
- Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
- Do not touch the product with wet hands.
- This product is not considered a light fixture. Make sure that continuous operation does not exceed six hours.
- Never look into the light for a long time. There is a risk of serious eye damage.
- Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury.
- Do not immerse the product in water or other liquids or throw it into a fire.
- Do not leave the product unattended while it is in operation.
- Avoid turning the product on and off frequently and repeatedly.
- While the product is in operation, it may become hot. This is a normal occurrence. Therefo-re, make sure that there are no heat-sensitive objects / surfaces near the product.
- If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
- Avoid overloading the product. Avoid dropping the product.
- Do not place any objects on the product. There is a risk of irreversible damage to the product.
- This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check it regularly for damage.
- Use only a soft, clean, dry cloth to clean the surface.
- Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substances. Before cleaning, make sure that the product is disconnected from the power supply.
- Store the product in a dry and well-ventilated place. Do not place any objects on the pro-duct when in storage.
DISPOSAL OF USED BATTERIES
Batteries contain materials harmful to the environment. Do not dispose of
batteries in a regular community waste. Dispose of used batteries properly at
collection points.
WARRANTY & SUPPORT
Your new product is protected by our 24-month warranty, or extended warranty
(if stated), which you can apply at any of our points of sale. For inquiries,
you can use the contact form or one of our international call centres.
This product meets all of the related basic EU regulation requirements. The EU
declaration of conformity is available on
www.alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated
as household waste. By ensuring this product is disposed of correctly, you
will help protect the environment. For more detailed in-formation about the
recycling of this product, please contact your local authority, your household
waste disposal service provider, or the shop where you purchased the item.
“For indoor use only” symbol indicates that the product is not intended for
outdoor use.
www.eternico.net
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2022
Alza.cz a.s. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>