BRESSER 9630902 TNS2 Wi-Fi Thermal Imaging Camera Instruction Manual

: June 9, 2024
: BRESSER

9630902 TNS2 Wi-Fi Thermal Imaging Camera

WIFI Thermal Night Vision

TNS2

Art. No. 9630902

INSTRUCTION MANUAL

apps download

MANUAL & APP DOWNLOAD:

www.bresser.de/download/9630902

Google Play and the Google Play logo are trademarks of Google Inc.
Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.

ABOUT THIS INSTRUCTION MANUAL

These operating instructions are to be considered
a component of the device.
Please read the safety instructions and the operating
instructions carefully before use.
Keep these instructions for renewed use at a later
date. When the device is sold or given to someone
else, the instruction manual must be provided to
the new owner/user of the product.

GENERAL WARNINGS

RISK OF CHOKING!
Keep packaging material, like plastic bags and rubber
bands, out of the reach of children, as these
materials pose a choking hazard.

RISK OF ELECTRIC SHOCK!
This device contains electronic components that
operate via a power source (power supply). Children
should only use the device under adult supervision.
Only use the device as described in the
manual; otherwise, you run the risk of an electric
shock.

Disconnect the device from the power supply by
pulling the power plug when it is not used. In case
of longer interruption of operation and before
starting any work on maintenance and cleaning.

Always pull on the plug to separate the device
from the power supply. Never pull on the cable.

RISK OF FIRE/EXPLOSION!
Do not expose the device to high temperatures.
Use only the supplied power supply. Do not
short-circuit the device. Excessive heat or improper
handling could trigger a short circuit, a fire, or
an explosion.

NOTE!
Do not disassemble the device. In the event of a
defect, please contact the Service Centre in your
country.

Do not immerse the unit in water.
Do not subject the unit to excessive force, shock,
dust, extreme temperature or high humidity,
which may result in malfunction, shorter electronic
life span, damaged batteries and distorted parts.

When the product works, slight click will be given
out every several seconds. This is the normal phenomenon
that the lens captures the image.

INTRODUCTION

This Thermal Night Vision device adopts advance
non-cooled focal plane infrared detector and quality
optical lenses as the core. With the characteristics
of convenient and quick operating system,
small appearance design, expansion parts with
perfect function, long duration of use, it is sturdy
and durable and applicable to all types of environments
and provides an ideal temperature measurement
tool featuring “clear imaging, precise
measurement, simple operation and easy to carry”.
This is the best selection for onsite detection,
preventive maintenance and other application
sites.

The product may be used for outdoor animal
observation, search and rescue, law enforcement
detection for policemen, night patrol, outdoor
activities and personal security, etc. The product
is provided with the photographing function. The
photos may be browsed by connecting with a
computer through USB to make it convenient for
observation of many persons at the same time,
which creates possibility for application in more
occasions.

SCOPE OF DELIVERY

• Thermal Night Vision device
• USB cable
• Power supply adapter (for use with USB cable)
• Case
• Instruction Manual

BATTERY CHARGING INSTRUCTIONS

Use USB data line to charge:
This product has a built-in rechargeable battery.
When the battery is low, please charge it in time
via the Micro USB port.
After fully charged, unplug the USB cable.

Note: When the battery is completely empty, there
will be an abnormality. It is recommended to use
the battery when it is sufficient.

PARTS OVERVIEW

OPERATING

CHARGING
The product is provided with built-in battery.
When the battery power is not sufficient, please
charge it through Micro USB interface in time.

POWER ON/OFF
Hold down [] key to power on /off.

IMAGE CAPTURE
Press [ ] key to capture the image. The screen
will show [] prompt, indicating that image capture
is successful.

VIDEO CAPTURE
Video recording is only possible via the WIFI app.

IMAGE REVIEW
After powering on, short press the [] key to
enter the image viewing mode (the image shows
the last image taken), press the [ ] key to view
the previous image, press the [] key to view the
next image, and press the [] key to exit Image
viewing mode.

DELETE IMAGE
After entering the image viewing mode, press and
h old the [ ] key to delete the currently viewed
image.

IMAGE EXPORT
Capture and save images can be viewed and exported
via a Micro USB connection to a computer.

MODE SWITCHING
ress the [ ] button to switch between the four
imaging modes of rainbow, iron oxide red, white
heat and black heat.

ZOOM IN/OUT
Under the power-on state, press the [] key, and
each time you press it, the target of “2X, 4X” will
be gradually enlarged and displayed. Press again
to return to the normal state.

BRIGHTNESS ADJUSTMENT OF THE DISPLAY SCREEN
Under the power-on state, press and hold the [ ] key to adjust the brightness. Each long press adjusts
the brightness by 1 level.

DIOPTER ADJUSTMENT
Rotate the diopter adjustment button left and
right to adjust the diopter for yourself.

FOCUSABLE LENS
Rotate the focus lens button left and right to focus.
Rotate clockwise for near focus and counterclockwise
for far focus.

INDICATOR LIGHT

Status

|

Not being charged

|

In

charging

|

Fully

charged

---|---|---|---

Power on

|

Blue

|

Red blue

(purple)

|

Blue

Power off

|

None

|

Red

|

None

APPLICATION OF AMPLIFICATION

The magnification function may be utilized when remote objective is photographed so as to ob serve the objective clearly. The effect picture is as follows:

Normal

|

2X

|

4X

APPLICATION OF COLOR PALETTE

The color palette menu may change the pseudo color of infrared thermal image and provide six types of color palettes: rainbow, iron oxide red, white heat, black heat, yellow, bird watching.

The selection of proper color palette can show the details of target object in a better manner. The color palette of rainbow and iron oxide red focuses on display of color and is very suitable for the condition of high heat contrast and used to color palette.

UNDER-FLOOR HEATING, TERRESTRIAL HEAT AND LEAKAGE POINT – DETECTION

SKILL

1. Heat the floor for 3 minutes.

2. Adjust the ambient light to darkest. Stabilize the instrument and not shake it. Stand to detect large area.

3. Pieces of pipes appears in non leakage image. The locality of leakage point is red.

4. A large area of red appears if floor temperature is high. The effect is better if reducing temperature first and rising it up again.

Note:

1. Suggest that the under-floor temperature is above 40° C. The preheating time is more than 3 minutes. (Make adjustment according to depth of under- floor heating pipe concretely).

2. Don’t be too close to the floor. Suggest making observation for large area.

3. The locality of leakage point will appear a imag ing area.

4. If the temperature is too high, it needs to turn off the under-floor heating. Rise temperature of the under-floor heating for detection after the floor reduces to normal temperature.

WIFI FUNCTION & APP DOWNLOAD MENU

First install the app on your smartphone.

Download (AppStore or Google Play):
http://www.bresser.de/download/9630902

Now press and hold the [ ] button for 3 seconds to
start the WIFI function. Search for “FPVWIFI****”
under open Wifi networks on your smartphone and
connect to it. Enter the password: “wifi12345678”.
Now open the app. After pressing Start, the connection
to the camera is established.

1. Start screen
2. Take photos
3. Record videos
4. Playback
5. Picture rotation
6. Screen view

Press and hold the [ ] button for 3 seconds to stop
the Wifi function and to disconnect the camera.

VIDEO OUTPUT

Connect an external screen via the SMA socket of
the video output and switch on the unit. To start
the video output function (CVBS), press and hold
the [ ] key for 3 seconds. The screen now switches
to the display of the external screen. Press
and hold the key again for 3 seconds to exit the
mode.

MENU
Press and hold the [] key for 3 seconds
to open the menu. Press and hold the
button again for 3 seconds to exit the menu.

Button

|

Description

---|---

|

• Press and hold the key to enter the menu.

• Press the key briefly to confirm in the menu.

|

Return to the previous menu or exit menu.

|

Navigate upwards in the menu.

|

Navigate down in the menu.

Function

|

Description

---|---

Colour

|

Colour palettes:

white hot, black hot, rainbow, red hot, yellow, bird watching.

The default value is white hot.

Brightness

|

10 brightness levels (0-9).

The default value is 5.

Contrast

|

10 contrast levels (0-9).

The default value is 5.

HOT

|

Hotspot tracking: automatic tracking of multiple hotspot destinations (on or off).

The default value is off.

PI

|

Perfect image:

(PI+, PI-) (0-4).

The default value is “PI- 3”.

Language

|

Language selection:

English (EN), German (DE), Spanish (ES).

The default value is English (EN).

Photo

|

Display images:

Press the [ picture.] to display the first

Press [ ] for up or [ ] for down to change the picture. Long

press the [] to delete the current picture. Press [] again briefly to end the picture display.

WIFI

|

WIFI:

On or off.

The default value is off.

---|---

System

|

System:

RES: Reset

UPGR: Update

UPGR:

Connect the unit to the computer via USB at start-up, copy the upgrade file config.txt to the unit’s SD card, then disconnect the USB connection, open the menu, press the up [ ] or down [ ] key to select the “Firmware Upgrade” option, press the [] to perform the upgrade. If it is not successful, please repeat the upgrade steps, reboot the unit, connect the unit to the computer via USB and delete the upgrade file.

Remember: The upgrade file cannot be renamed and the file extension cannot be changed, otherwise the upgrade will fail!

TECHNICAL DATA

Probe type

|

Uncooled focal plane

---|---

Resolution ratio

|

384×288 infrared focal plane

LCD resolution

|

720X540

Focus length

|

19mm; 25mm; 35mm

Eyepiece

|

Single eyepiece display (the dioptric

compensation is

adjustable)

Field angle

|

19.5°x14.7°;

14.9°x11.2°; 10.7°x 8°

Digital zoom

|

2X; 4X

Discovery range

(the object can be

discovered, but it is not yet possible to identify what exactly it is)

|

Boar: 1471 m

Vehicle: 2501 m

Detection range (from this range the object can be detected)

|

Boar: 367 m

Vehicle: 626 m

Wavelength coverage

|

8μm-14μm

Frame rate of thermal images

|

50Hz

Color palette

|

Rainbow/iron

oxide red/white

heat/black heat

Focusing mode

|

Adjustable

Image storage

|

BMP

Battery

|

Built-in rechargeable batteries

USB

|

Micro USB

Working time

|

≥15 hours

Work temperature

|

0 °C to 45 °C

Storage temperature

|

-20 °C to 60 °C

Product size

|

186x69x68 mm

Product weight

|

440g

DISPOSAL

Dispose of the packaging materials properly,
according to their type, such as paper or
cardboard. Contact your local waste-disposal
service or environmental authority for information
on the proper disposal.

Do not dispose of electronic devices in the
household garbage! As per Directive 2002/96/
EC of the European Parliament on waste electrical
and electronic equipment and its adaptation into
German law, used electronic devices must be
collected separately and recycled in an
environmentally friendly manner.

EC DECLARATION OF CONFORMITY

Hereby, Bresser GmbH declares that the
equipment type with part number: 9630902
is in compliance with Directive: 2014/53/
EU. The full text of the EU declaration of conformity
is available at the following internet address:
www.bresser.de/download/9630902/CE/9630902_CE.pdf

UKCA DECLARATION OF CONFORMITY
Bresser GmbH has issued a „Declaration
of Conformity“ in accordance with
applicable guidelines and corresponding
standards. The full text of the declaration of
conformity is available at the following internet
address:
www.bresser.de/download/9630903/UKCA/9630903_UKCA.pdf

Bresser UK Ltd. • Suite 3G, Eden House, Enterprise
Way, Edenbridge, Kent TN8 6HF, Great Britain

WARRANTY
The regular warranty period is 5 years and
begins on the day of purchase. You can consult
the full warranty terms as well as information on
extending the warranty period and details of our
services at: www.bresser.de/warranty_terms.