MONSTER MLB7-1098-RGB Vertex Plus Smart RGBIC Corner Light User Guide
- June 9, 2024
- Monster
Table of Contents
MONSTER MLB7-1098-RGB Vertex Plus Smart RGBIC Corner Light
Thank you for choosing the Vertex+Smart RGB+IC Corner Light by Monster Smart lluminessence. This Quick Start Guide will help you with setup and installation of your device.
WHATS IN THE BOX
- Vertex+ Smart RGB+IC Corner Light with attached controller (three light sections+ two support legs with screws)
- Velcro Cable Tie (optional use)
- Quick Start Guide
WHAT DO YOU NEED?
- Cellphone or tablet with AndroidTM 6.0 Marshmallow or higher/ Os 10 or higher
- Wi-Firouter with an internet connection
- Wi-Fi24GHz 802.1n
Before setup, make sure your phone or tablet is connected to the
2.4GHz W-FI network that your Vertex+ will be placed on. For easier pairing,
turn on Location and Bluetooth to quickly find nearby devices
TIP: Do you know your Wi-Fi network name and password? Write it down now
if it’s hard to remember.
ANYTHING ELE?
This device requires 5V2A USB power source like a USB adapter (not included).
If insufficient power is supplied it may not function properly.
TIP: Save these instructions for future reference.
SETUP COMPLETE SETUP BEFORE INSTALLATION
Remove your Vertex+ and all components from the box.
Itis recommended to first pair your device in a location close to your router
BEFORE installation.
NOTE: If desired. you can operate the device with the controller and
without pairing to Wi-Fi and without the app. Advanced features like color
customization, scheduling, and voice control will not be available. (See “How
To Use” on page 5)
STEP 1
Download the aa MONSTER SMART app from the App Store (for iPhone) or Google
Play Store (for Android phones)
STEP 2
Make sure your phone or tablet is successfully connected to the 2.4GHz WI-
Finetwork that your device will be placed on and ensure that your Bluetooth is
enabled. Open the na MONSTER SMAAT app and create an account by following the
on-screen instructions. Most Smart devices only work on a 2.4GHz WI-Finetwork.
Many newer home Wi-Finetworks are mixed networks that are set to 5GHz by
default (ex AT&T,Verizon) and you may need touse AP pairing mode to connect.
If you still have difficulty.contact your
NOTE Internet Service Provider for assistance with 24GHz network setup.
STEP 3
Connect the USB plug to a powered 5V 2A USsB wall adapter (not included). then
press the multifunction button twice to turn on the light. Press and hold the
multifunction button for 5-6 seconds to enter pairing mode. The light will
begin blinking when it has entered pairing mode and is ready to pair
STEP 4
Confirm that the device is in pairing mode, LED is RAPIDLY blinking In the
MMONSTEA SMART app, select the”+”in the upper right corner of the home screen
to add a new device.
The app will detect the nearby WI-Fi+BLE enabled device and ask if you would like to add it, click “Go to add”. Ensure that the device is checked and then clickthe”+”button.
STEP5
Confirm that the network displayed is your 2.4GHz WI-FI network. then enter
your W-Fi password and click “Confirm”
Once complete, your device will be connected to the network. Confirm or change the settings for your device and then click “Done”. Your device is now setup and ready to use!
You can now use the app to add voice control (see pg 8), adjust settings, create custom lighting effects, set schedules, and more!
INSTALLATION
STEP 1
Attach the two support legs to the V-shaped base of the bottom light section. Ensure that the smll holes are aligned facing upwards.
STEP 2
Insert the attachment screws into each screw hole and tighten in place. Stand
up the Vertex+and check that the light is stable.
STEP 3
Connect the middle light section to the top of the bottom light section by
inserting the metal support into the opening. Take care to align the two light
sections and connect them straight, not angled.
STEP 4
Connect the top light section to the middle light section in the same way.
Note: During assembly the light covers may slide up or down slightly, simply
slide them back into place and ensure that all connections are secure with no
gaps between the parts.
STEP 5
Connect the USB plug to a powered 5V 2AUSB wall adapter (not included) and
double click the button on the controller. The Vertex+ will turn on and
automatically reconnect to the pairedW-Fi network and will now be ready to
use!
OPTIONAL
A velcro cable tie has been included for your convenience. If desired you can
use it to secure the USB power cable to one of the support legs for a neat
appearance.
HOW TO USE
Your Vertex+ Smart RGB+IC Coner Light can be easily controlled by the
controller, using the MMONSTER SMART app to access advanced and customizable
lighting effects, or by using a compatible voice assistant product (see page
8).
BUTTON CONTROL
APP CONTROL: SOENES
Open the M MONSTER SMART app and click on your device from the list of
available paired devices.
WHITE: Multiwhite selector wheel and buttons with brightness adjust
COLOR: Multicolor selector wheel and buttons with brightness adjust
STATIC: Customizable static color scenes with color selectors and
brightness adjust. Each Static scene has it’s own unique pattern.
DYNAMIC: Flowing multicolor scenes with brightness/speed adjust
MUSIC: Sound reactive multicolor scenes with mic sensitivity adjust
DIY:Customizable flowing multicolor scenes with color selectors
brightness and speed adjust. Each DIY scene has it’s own unique flowing
patten. Create and save your favorites!
EDIT SCENES
GROUPING DEVICES
Your Vertex+ is great to use in multiples, you can control each separately or
easily group multiple lights together in the app to control them all as one.
Click on the settings button in the upper right coner and then click Create
Group” to group your devices
NOTE: Grouping different Monster Smart lluminessence devices with different features may cause communication issues when selecting Scenes. For best results create groups of the same products. if you would like to group together different items, it is recommended to control using the Color settings only. rather than Scenes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>