alora mood FM416114 Rue Flush Mount Brushed Gold Instruction Manual
- June 13, 2024
- alora mood
Table of Contents
Rue
FM416114
TECHNICAL SUPPORT
1.855.855.8926
[email protected]
FM416114 Rue Flush Mount Brushed Gold
Please Note:
· 120V input
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
Step 1
Remove fixture from its original package.
Step 2
Separate mounting plate (1c) from fixture (2a) by removing decorative nuts
(2c).
Step 3
Align mounting plate screws (1d) to desired orientation, and then attach
mounting plate (1c) to electrical junction box (1a) using junction box screws
provided (1e) in hardware package
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”,
ground to “GND”) with wire nuts (1b) provided in hardware package.
Step 5
Align and insert mounting plate screws (1d) through holes on fixture (2a),
secure with decorative nuts (2c)
Step 6
Install the recommended lamp (4a) (not provided) (referred on the socket label
for maximum wattage and type) to fixture socket.
Step 7
Attach center post (2d) to fixture (2a), followed by washer (2e), glass (3a),
second washer (3c), and secure with finial (3b) by threading clockwise.
You are now ready to enjoy your fixture.
P.20230224
CANADA: 19054 28th Ave., – Surrey, BC V3Z 6M3
USA: 3035 E. Lone Mountain Rd. – Las Vegas, NV 89081
www.aloramood.com
1.855.855.8926
Documents / Resources
|
alora mood FM416114 Rue Flush Mount Brushed
Gold
[pdf] Instruction Manual
FM416114BG, FM416114, FM416114 Rue Flush Mount Brushed Gold, Rue Flush Mount
Brushed Gold, Flush Mount Brushed Gold, Mount Brushed Gold, Brushed Gold, Gold
---|---