ASHLY B758154 Lindenfield Queen Upholstered Platform Bed User Manual
- June 9, 2024
- ASHLY
Table of Contents
ASHLY B758154 Lindenfield Queen Upholstered Platform Bed
IMPORTANT SAFETY NOTICE
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
-
Always use proper tools.
-
Follow the assembly steps in order.
-
Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which
you purchased the product to obtain any missing parts. -
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
-
Keep the instructions for future reference.
-
Some assembly may involve attaching glass or mirrors. glass or mirrors, as severe injury may result if the glass or mirror breaks. large pieces of glass or mirrors by yourself.
-
When assembling products that have electric cords (lamps, lights, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
-
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves-use a step ladder.
-
Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
-
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
NOTE:
- ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
- YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
PARTS LIST
B758-157,158
B758-194,196,19
B 58-154,156
NOTE:
THE UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS
UNTIL ALL BOLTS HAVE BEEN STARTED!
INSTALLATION
NOTE: Turn the Adjustable Leveler on the bottom of the Cross Slat Support
Leg leaving 6mm space between the eveler nd the floor. 
NOTE: Always disassemble the bed prior to moving to a new location.
Contact Information
SIGNATURE DESIGN BY ASHLEY ®
All Rights Reserved.