NEXIGO 1548 P5 Wall Mont Set User Manual
- June 9, 2024
- NEXIGO
Table of Contents
1548 P5 Wall Mont Set
User Manual
Wall Mount with Controller Holders for P-5
Model No. NexiCio-P5 Wall Mount Set-1548
User Manual
Register to get EXTRA ONE year warranty.
Only valid in registering within 14 days of product
delivery. nexigo.com/warranty
Welcome to the NexiGo Family!
Thank you for choosing the NexiGo 1548 Wall Mount with Controller Holders for
the P-5! You are now part of an exclusive club: the NexiGo family! It’s our
job to make sure you enjoy your membership. If you have any problems please
contact us at cs@nexigo.com at any time for further
assistance. This product is covered by our industry leading 1-year
manufacturers warranty. Register at
nexigo.com/warranty or scan the QR code to get a
FREE additional 1-year warranty!
From all of us here at NexiGo, we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving you again in the near future.
Yours Sincerely. The NexiGo Team
Contact Information:
Website: www.nexigo.com
Manufacturer: Nexight INC Email: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR 97005, US
Product Introduction:
The NexiGo 1548 Console Wall Mount with Controller Holders is designed exclusively for the P-5 console. and is compatible with both Digital and Disc editions. Simply attach the wall mount using the included screws and wall anchors for a secure, stable installation. It provides easy access to the console and controllers while keeping them secure, so you don’t have to hide your new toys in your entertainment center or worry about breaking them!
What’s in the Box:
Installation Guide:
Step 1: Position the console wall mount at an appropriate location on the
wall and then locate the screw holes in the wall mount. Use a level (NOT
INCLUDED), to make sure that the mount is level on the wall. Mark each hole
carefully with a pencil or pen to ensure that the item is mounted in the
correct location. Once you have marked the holes, repeat this process with the
controller holders. (See below for alternate mounting instructions for the
controller holders.)
Step 2:
Drill a hole at each mark (Drill and drill bit NOT INCLUDED).
Step 3:
Insert a wall anchor into each hole and hammer in the wall anchors so they are
nearly flush with the wall surface. (Hammer NOT INCLUDED) 
Step 4: I nsert screws into the wall anchors, but do NOT fully insert the
screws into the wall. Leave approximately Y. to 1/2 of an inch of the screw
sticking out of the wall.
Step 5:
Slide the console wall mount and controller holders onto the screws, and then
slide the items down to ensure they are firmly attached.
Step 6:
Tighten the screws with the provided screwdriver to ensure that the console
wall mount and controller holders are firm and secure. The controller holders
and console wall mount are both ready to use!
Step 7:
Place the P-5 console on the console wall mount and affix the console to the
mount using the provided P-5 connector screw. 
Alternate Installation Instructions-Controller Holder:
Step 1: Clean the surface where you want to place the controller holder.
(Sticker may remove paint. Use with care.)
Step 2:
Peel the backing from one side of the mounting tape and apply the mounting
tape to the controller holder as shown in the image below.
Step 3:
Once the mounting tape is attached to the controller holder. remove the other
side of the mounting tape backing. Locate the spot you want to attach the
controller holder. and then carefully press the controller holder into place
in that location. Press and hold firmly for 30 seconds to secure the
controller holder where you are mounting it to. Step 4: After the controller holder is attached.
please wait about an hour before using the item to make sure the controller
holder is firmly attached. The glue will require some time to bond in place.
using it before this has happened may cause the glue to fail and this could
damage the controller, wall, or mount After waiting an hour. the controller
holders will be ready to use!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>