ETAC Immedia SatinSheet 4Direction DrawSheet Instructions

June 9, 2024
Etac

ETAC Immedia SatinSheet 4Direction DrawSheet

ETAC-Immedia-SatinSheet-4Direction-DrawSheet-product-
image

See www.etac.com

Illustrations

ETAC-Immedia-SatinSheet-4Direction-DrawSheet-1

General

Thank you for choosing an Etac product.
To avoid accidents and injury when moving and handling the products, please read this manual carefully.
The person described as “the user” in this “Instruction for Use” is the person who is lying or sitting on the product. The carers are the people who manoeuvre the product.
These products comply with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices.
At Etac we strive to continually improve our products and therefore we reserve the right to make changes to products without prior warning. All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects.These products comply with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices.
At Etac we strive to continually improve our products and therefore we reserve the right to make changes to products without prior warning. All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects.
The information given in this manual, including recommendations, combinations and sizing, does not apply to special orders and modifications. If the customer makes adjustments, repairs or uses combinations not predetermined by Etac, the Etac CE certification and Etac warranty will not be valid. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing defects, provided that the product is used correctly.
Expected lifetime: The device has an expected service life of 1 to 2 years under normal use. The service life of the device varies depending on usage frequency, loads and how often and how it is washed.
For further information on the Etac Patient handling, see www.etac.com.
In case of an adverse event occurred in relation to the device, incidents should be reported to your local dealer and the national competent authority in a timely manner. The local dealer will forward information to manufacturer.

Symbols in general
  • Washing
  • Do not bleach
  • Tumbledry
  • Iron
  • Do not dryclean
  • Medical device
  • Disinfect / Wipe off
  • Never leave on the floor
  • Risk of sliding down
  • Keep out of the sun
  • Read the user manual
  • Warning
  • Production year, month and day
  • Batch no./Lot no.
  • User mass limit = maximum rated load
  • The product can be scrapped according to national regulations
  • Manufacturer
  • CE -marked
  • Keep dry
  • Non sterile
  • Article number
Intended purpose

SatinSheet 4Direction is a DrawSheet for use with BaseSheet (SatinSheet BaseSheet 2Direction). The SatinSheet system is used for repositioning and turn a user in bed.

Intended environment
Acute care, Long-term care, Home care

Practical handling

Positioning

Position SatinSheet BaseSheet with the low-friction material (satin) uppermost in the middle of the bed (Illustrations).
If necessary, a draw sheet can be laid on SatinSheet.
All SatinSheet models have a “this side up” label indicating which side of the sheet should face upwards in the bed.
An information label, describing the correct use of the product, is sewn into all SatinSheet models/products.
Place SatinSheet 4Direction on BaseSheet (satin against satin).
Before locking the glide system under the mattress, any unevenness/wrinkles should be smoothed to avoid decubitus. The carers pull simultaneously and diagonally from both sides.

Use

Turning with SatinSheet 4Direction (Illustrations 1-3)
Always use SatinSheet 4Direction with one of the SatinSheet models.
The back of SatinSheet 4Direction is made of a low-friction material. It is ideal for use with bariatric users. The procedure for turning with SatinSheet 4Direction is identical with the procedure for turning with SatinSheet and a draw sheet.
To turn a user in bed: Grasp the draw sheet at hips and shoulders. To achieve a better ergonomic grip, the carer should grasp as much fabric as possible.

Always work with flat wrists and weight transference.
Turning with SatinSheet can also be done by two carers. The carers work together. One carer helps pull on SatinSheet while the other carer pulls down on the mattress at the level of the user’s hips and shoulders, pushing gently.
If using Satinsheet 4Direction with handles you can turn the user with a hoist. Place the webbing handles on the sling bar hooks and slowly turn the user (Illustrations 4+5). Place a positioning pillow or wedge to support the user’s back and slowly lower the hoist again. Remove the handles from the sling bar hooks. Raise the guard rails if required.

Turn the user.
To lock the glide system after turning: Fold the excess material from DrawSheet under the mattress on both sides of the bed.

Moving the user higher up in the bed (Illustration 6)
To move the user higher up in the bed, grasp SatinSheet 4Direction at both sides of the user’s shoulders. Standing with one foot forward, the carer pulls, using weight transference.

Sitting up in bed with SatinSheet 4Direction (Illustrations 7+8)
To prevent the user sliding down in the bed when sitting up, part of SatinSheet 4Direction can be folded in under the user. Then fold SatinSheet in under the mattress, although only at the hips. The bed headboard can then be raised. SatinSheet functions here as a brake.

Prone positioning
Remove the head-end of the bed. If the user is connected to a ventilator or other life saving machines, turn the user towards the equipment. Place the hand of the user under the hip. If needed add 2-3 pillows or positioning cushions used on top of the users body. Place a SatinSheet4Direction on the pillows with the satin facing upwards, starting at the head end – fold the 4Direction away from the users head. Tug the SatinSheet4Direction top around the user like a cocoon.

Fold the lower 4Direction away from the users head (satin against satin)
One carer secures the head of the user and one carer on each side to support the user.
Move the user to the opposite side to where the user is turned. Place the webbing handles from the SatinSheet4Direction which the user lay on in the sling bar hooks and slowly turn the user to almost 90° (Illustrations 9) Push and pull in the SatinSheet4direction, to secure the rotation is a bit of center. When user is on the side one carer tug the SatinSheet4Direction on the bed under the user to be able to remove it when
the user is turned to prone.Same carer support the user by having the hands on the shoulder. Continue to turn the user until the user is in a proned position. Lower the hoist again. Remove the handles from the sling bar hooks and remove the SatinSheet4Direction. Unfold the 4Direction under the users head. If nesseccary move the user to the center of the bed. Secure that the user is correct positioned. (illustration 10) Raise the bed rails if required. Turn to supine positioning the same way.

Notice

Special features

Always check the product before use and after washing.
Never use a defective product. If the product shows signs of wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual handling. Etac offers advice and training for carers. For further information, contact Etac.
Always use the correct manual handling techniques
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual handling is smooth, always plan the manual handling in advance.

  • There is a risk that the user may slide off. Never leave the user alone on the edge of the bed.
  • Never leave the product on the floor.
  • Always conduct a risk assessment, and ensure that the assistive product can be used for the individual user and, in combination with other devices, that it is safe for the user and carers.
  • It is recommended that the guard rail is in place when the user is left on the glide system, unless a risk assessment has found that the user can be safely left on the glide system without the need of guard rails.
  • Always lock the glide system when you have completed the transfer.

If in any doubt – please contact Etac.

Material and cleaning

Material:

  • SatinSheet 4Direction:
  • Polycotton: 55% cotton/45% polyester
  • Satin: Polyester.
  • SatinSheet In2Sheet 4Direction:
  • Microfibre top side: Polyester
  • Middle layer: 65% polyester/35% viscose
  • Barrier: Polyurethane
  • Glide area: Polyester
  • Handles: Nylon
  • Wings: 55% cotton/45% polyester.
  • Absorption: 2200 ml/m².

The product should be checked regularly, preferably each time it is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
Recommended to wash the product before use.

Washing instructions:
Ironing improves the glide effect.
Do not use fabric softener.
This product can be cleaned with a solvent-free cleaning agent with a pH level between 5 and 9, or a 70% disinfection solution.

Products and accessories

Article no :Product Description: Size (mm)

  • IM4115S SatinSheet 4Direction – midi (satin W1470xL1400 mm) W2000xL1400
  • IM4115SH SatinSheet 4Direction w/handles – midi (satin W1470xL1400) W2000xL1400
  • IM4121S SatinSheet 4Direction – maxi (satin W1470xL2000 mm) W2000xL2000
  • IM4121SH SatinSheet 4Direction w/handles – maxi (satin W1470xL2000) W2000xL2000
  • IM4131SH SatinSheet 4Direction w/handles maxi – wide W3000xL2000
  • IM4110S In2Sheet 4Direction w/wings – mini W850xL900
  • IM4110SH In2Sweet 4Direction w/wings + handles – mini W850xL900
  • IM4140S In2Sheet 4Direction w/wings – midi W1200xL1400
  • IM4140SH In2Sheet 4Direction w/wings and handles – midi W1200xL1400

Set

Article no.:  Description :SatinSheet 2Direction BaseSheet : SatinSheet DrawSheet and SatinSheet 4Direction

  • IM4200S SatinSheet DrawSheet midi set IM4113S SatinSheet 2Direction midi IM4118S SatinSheet DrawSheet – midi
  • IM4201S SatinSheet DrawSheet mini set IM4108S SatinSheet 2Direction mini IM4116S SatinSheet Drawsheet – mini
  • IM4202S SatinSheet DrawSheet maxi midi set IM4114S SatinSheet 2Direction maxi IM4118S SatinSheet DrawSheet – midi
  • IM4203S SatinSheet 4Direction Fit midi set IM4112S SatinSheet 2Direction FIT IM4115S SatinSheet 4Direction – midi
  • IM4204S SatinSheet 4Direction midi set IM4113S SatinSheet 2Direction midi IM4115S SatinSheet 4Direction – midi
  • IM4205S SatinSheet DrawSheet midi small set IM4119S SatinSheet 2Direction midi small IM4118S SatinSheet DrawSheet – midi
  • IM4207S SatinSheet 4Direction midi small set IM4119S SatinSheet 2Direction midi small IM4115S SatinSheet 4Direction – midi
  • IM4208S SatinSheet Corner DrawSheet midi set IM4107S SatinSheet 2Direction w/elastic IM4118S SatinSheet DrawSheet – midi
  • IM4209S SatinSheet In2Sheet midi mini set IM4119S SatinSheet 2Direction midi small IM4110S In2Sheet 4Direction w/wings – mini
  • IM4210S SatinSheet In2Sheet mini set IM4108S SatinSheet 2Direction mini IM4110S In2Sheet 4Direction w/wings – mini
  • IM4211S SatinSheet Corner 4Direction midi set IM4107S SatinSheet 2Direction w/elastic IM4115S SatinSheet 4Direction – midi
  • IM4212S SatinSheet Corner 4Direction maxi set IM4107S SatinSheet 2Direction w/elastic IM4121S SatinSheet 4Direction – maxi
  • IM4213S SatinSheet 4Direction maxi set IM4114S SatinSheet 2Direction maxi IM4121S SatinSheet 4Direction – maxi
  • IM4214S SatinSheet 4Direction maxi set – wide IM4177S SatinSheet2direction maxi – wide IM4121S SatinSheet 4Direction – maxi
  • IM4215S SatinSheet 4Direction maxi set – double IM4180S SatinSheet 2Direction maxi – double IM4121S SatinSheet 4Direction – maxi
  • IM4216S SatinSheet 4Direction midi set – wide IM4176S SatinSheet2direction midi – wide IM4115S SatinSheet 4Direction – midi
  • IM4217S SatinSheet 4Direction midi set – double IM4179S SatinSheet2direction midi – double IM4115S SatinSheet 4Direction – midi
  • IM4218S SatinSheet 4Direction maxi midi set IM4114S SatinSheet 2Direction maxi IM4115S SatinSheet 4Direction – midi
  • IM4219S SatinSheet 4Direction maxi midi set – wide IM4177S SatinSheet2direction maxi – wide IM4115S SatinSheet 4Direction – midi
  • IM4220S SatinSheet 4Direction maxi midi set -double IM4180S SatinSheet 2Direction maxi – double IM4115S SatinSheet 4Direction – midi
  • IM4221S SatinSheet DrawSheet maxi midi set – wide IM4177S SatinSheet2direction maxi – wide IM4118S SatinSheet DrawSheet – midi
  • IM4222S SatinSheet DrawSheet maxi midi set – double IM4180S SatinSheet 2Direction maxi – double IM4118S SatinSheet DrawSheet – midi
  • IM4223S SatinSheet DrawSheet midi set – wide IM4176S SatinSheet2direction midi – wide IM4118S SatinSheet DrawSheet – midi
  • IM4224S SatinSheet DrawSheet midi set – double IM4179S SatinSheet2direction midi – double IM4118S SatinSheet DrawSheet – midi
  • IM4225S SatinSheet Corner 4Direction midi set – wide IM4147S SatinSheet 2Direction w/elastic-wide IM4115S SatinSheet 4Direction – midi
  • IM4226S SatinSheet Corner 4Direction midi set – double IM4137S SatinSheet 2Direction w/elastic-double IM4115S SatinSheet 4Direction – midi
  • IM4227S SatinSheet Corner DrawSheet midi set – wide IM4147S SatinSheet 2Direction w/elastic – wide IM4118S SatinSheet DrawSheet – midi
  • IM4228S SatinSheet Corner DrawSheet midi set – double IM4137S SatinSheet 2Direction w/elastic-double IM4118S SatinSheet DrawSheet – midi
  • IM4229S SatinSheet Corner 4Direction maxi set – wide IM4147S SatinSheet 2Direction w/elastic – wide IM4121S SatinSheet 4Direction – maxi
  • IM4230S SatinSheet Corner 4Direction maxi set – double IM4137S SatinSheet 2Direction w/elastic – double IM4121S SatinSheet 4Direction – maxi
  • IM4231S SatinSheet Corner 4Direction w/handle midi set IM4107S SatinSheet 2Direction w/elastic IM4115SH SatinSheet 4Direction w/handles- midi
  • IM4251S SatinSheet 4Direction maxi midi set – small

Combinations

Article no. BaseSheet – Mini

  • IM4133S SatinSheet 2Direction mini – small
  • IM4108S SatinSheet 2Direction mini
  • IM4175S SatinSheet 2Direction mini – wide
  • IM4178S SatinSheet 2Direction mini – double

BaseSheet – Mini can be combined with:

Article no. DrawSheet, 4Direction and PillowCase

  • IM4116S SatinSheet drawSheet – mini
  • IM4110S In2Sheet 4Direction w/wings – mini
  • IM4110SH In2Sheet 4Direction w/wings + handles – mini
  • IM4117S SatinSheet 2Direction PillowCase

Article no. BaseSheet – Midi

  • IM4119S SatinSheet 2Direction midi small
  • IM4113S SatinSheet 2Direction midi
  • IM4176S SatinSheet 2Direction midi – wide
  • IM4179S SatinSheet 2Direction midi – double

BaseSheet – Midi can be combined with:

Article no. DrawSheet, 4Direction and PillowCase

  • IM4118S SatinSheet DrawSheet – midi
  • IM4115S SatinSheet 4Direction – midi
  • IM4115SH SatinSheet 4Direction w/handles – midi
  • IM4121S SatinSheet 4Direction – maxi
  • IM4121SH SatinSheet 4Direction w/handles – maxi
  • IM4117S SatinSheet 2Direction PillowCase

Article no. BaseSheet – Maxi

  • IM4181S SatinSheet 2Direction maxi – small
  • IM4114S SatinSheet 2Direction maxi
  • IM4177SH SatinSheet 2Direction maxi – wide
  • IM4180S SatinSheet 2Direction maxi – double
  • IM4122S SatinSheet 2Direction180cm bed

Article no. BaseSheet – Maxi Corner

  • IM4107S SatinSheet 2Direction Corner
  • IM4147S SatinSheet 2Direction Corner – wide
  • IM4137S SatinSheet 2Direction Corner – double

Article no. BaseSheet – Maxi Fit

  • IM4112S SatinSheet 2Direction Fit
  • IM4142S SatinSheet 2Direction Elastic Fit

Article no. BaseSheet – Mini, Midi and Maxi Corner

  • IM4167S SatinSheet 2Direction Corner – small -mini
  • IM4157S SatinSheet 2Direction Corner – midi
  • IM4197S SatinSheet 2Direction Corner – double – double – maxi

BaseSheet – Maxi/Corner/Fit can be combined with:

Article no. 4Direction and In2Sheet 4Direction

  • M4115S SatinSheet 4Direction – midi
  • IM4115SH SatinSheet 4Direction w/handles – midi
  • IM4140S In2Sheet 4Direction w/wings – midi
  • IM4140SH In2Sheet 4Direction – w/wings + handles – midi
  • IM4121S SatinSheet 4Direction – maxi
  • IM4121SH SatinSheet 4Direction w/handles – maxi

Service information

Inspection

First inspection:

  • Is the packaging intact?
  • Read the label on the packaging and check the article no. and product description
  • Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac Customer Service or the local dealer.
  • Check the label on the product – does it include article no., product description, lot/batch no., cleaning instructions and supplier name?

Periodic Inspection:

  • Make sure that your Manual transfer system always is in a perfect condition.
  • After wash – always check materials, stitching, handles, buckles.
  • If the product shows signs of wear and tear, it must be removed from service immediately.

Visual inspection/Check the product:
Ensure that the materials, seams, stitching, handles, buckles are intact/faultless.

Mechanical load or stress/Test handles:
Draw hard in the handles in opposite directions and control the material, seams and stitching. Test buckles:
Lock the buckle and draw in opposite directions, control the buckle and the stitching.

Stability test:
Try to bend the product verify that it feels firm, stable and solid.

Test low/high friction:
Place the product on a firm surface or a bed, place your hands on the material and test the friction by pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/moving

Check:
Manual transfer aids with handles, straps and buckles:

Manual transfer aids with for sitting and lying transfer and with high or low friction:

Production year, month and day

The product can be scrapped in accordance with national regulations

Read the user manual

Etac Immedia A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
UK Responsible Person.
“Etac Ltd. Unit D4A, Coombswood Business Park East,
Coombswood Way Halesowen, West Midlands B62 8BH”
E-mail: enquiries@etac.uk.r82.com
Website: www.etac.com/uk
Phone: +44 0121 561 222

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals