UGREEN MU105 2.4G Wireless Mouse User Guide
- June 13, 2024
- UGREEN
Table of Contents
- UGREEN MU105 2.4G Wireless Mouse
- Product Overview
- Product Usage Instructions
- Product Overview
- Wireless 2.4G Connection
- Forced Pairing
- DPI Adjustment
- Low Battery
- Specifications
- Package Contents
- FCC Statement
- Important WEEE Information
- EU Declaration of Conformity
- GB Declaration of Conformity
- Warranty Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UGREEN MU105 2.4G Wireless Mouse
Product Overview
The 2.4G Wireless Mouse (Model: MU105) is a wireless mouse that operates on a 2.4GHz frequency. It provides a convenient and efficient way to navigate and control your computer.
Product Usage Instructions
-
Step 1: Connecting the Mouse
- Take the USB receiver out and insert it into a USB port on your computer.
- Turn on the mouse. The red indicator light should turn on.
- Randomly click the mouse to ensure that it works normally.
-
Step 2: Forced Pairing (If unable to pair)
If you are unable to pair the mouse with your devices, follow these steps:- Take the USB receiver out of the USB port.
- Press and hold the Left + Right + scroll wheel buttons simultaneously for 3 seconds until the indicator starts blinking.
- Insert the USB receiver back into the USB port of your device.
UGREEN
The mouse sensitivity can be adjusted using the DPI switch.
To adjust the DPI:
- The DPI value defaults to 1200. Hold and press the DPI switch for 1 second to adjust the mouse sensitivity.
- The mouse sensitivity is switched in the order of 1200-1600-2400-800 DPI.
Product Overview
- Right Button
- Left Button
- Scroll Wheel
- Indicator (On/Off, DPI Level, Low Battery)
- Power Button
- DPI Switch Button
- Optical Sensor
- USB Receiver
- Mouse Feet Film (Removable)
Wireless 2.4G Connection
- Step 1: Take the receiver out and insert it into USB port.
- Step 2: Turn on the product and the red indicator lights on.
- Step 3: Randomly click the mouse to make sure it works normally.
Forced Pairing
If you cannot pair the product with your devices, please do as follows:
- Take the receiver out of the USB port.
- Press and hold “Left + Right + scroll wheel” simultaneously for 3 seconds until the indicator starts blinking.
- Insert the receiver into the device.
DPI Adjustment
- The DPI value defaults to 1200, hold and press the DPI switch for 1s to adjust the mouse sensitivity.
- The mouse sensitivity is switched in the order of 1200-1600-2400-800.
Low Battery
- The mouse will turn off automatically when the battery is too low.
- When the indicator keeps blinking, it indicates that the battery is lower than 5%. Please change a new battery for further performance.
Specifications
- Connectivity: Wireless-2.4 GHz
- Max.RF Output Power: 4dBm( conducted)
- Operating Distance: 10 m/33 ft
- DPI (Sensitivity): 800/1200/1600/2400 DPI
- Operating Voltage: 1.5V
- Operating Current: 12mA
- Compatible Systems:
- Windows 7/8.1/10/11
- macOS 10.5 or later
- Linux
- Chrome OS
- Operating Temperature: -5℃~40℃/23°F~104°F
- Storage Temperature: -10℃~60℃/14°F~140°F
Notes
- Please do not dismantle the product except change the battery.
- Please do not shine the light directly into human eyes.
- Remove your battery if you plan on storing your device for some time to avoid possible product damage caused by battery leakage or corrosion.
- Do not submerge the product in water or other liquids or expose it to extreme or humid environments.
Package Contents
FCC Statement
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
- FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirement.
- The devicecan be used in portable exposure condition without restriction.
Important WEEE Information
- This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.
- Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
- Please contact your local authority for further details of your nearest designated collection point.
- Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
- For professional users in the European Union
- If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
- For disposal in countries outside of the European Union
- This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.
EU Declaration of Conformity
- Hereby, Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. Learn more about the EU
- Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
- Ugreen Group Limited
- Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
- Longhua, Shenzhen, China
- EU REP: Ugreen Group GmbH
- Add: Mannheimer Str. 13, 30880 Laatzen, Germany
GB Declaration of Conformity
- Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn more about the GB Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
- Ugreen Group Limited
- Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
- Longhua, Shenzhen, China
- UK REP: Acumen Intemational Business Consultancy Limited
- Add: 94 Ock Street, Abingdon, OX14 5DH, UK
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>