FRANCONE BT18 Exclusive Wall Mounted Spout Cold and Hot Handles Installation Guide
- June 9, 2024
- FRANCONE
Table of Contents
3 hole wall-mounted
installation
BT18 Exclusive Wall Mounted Spout Cold and Hot Handles
Guidelines
- Earth Bonding. Francone Bespoke Taps strives to continually improve so we reserve the right to change product specifications and design.
- All water fittings should only be installed by a qualified plumbing engineer.
- Take extra care during installation not to damage the finish or fitting.
- Before starting, flush pipes to remove debris and turn off water supply.
- We recommend the fitting of isolation valves to the inlet feeds for ease of maintenance.
- Optimal water pressure 3 bar. Minim water pressure 1 bar. Where water pressure exceeds 5 bar, we suggest pressure reducing valves are fitted. For optimum performance, hot and cold water pressure should be correctly balanced.
- Inspect all connections for leaks.
*1 Connection pipes*
Please note these pieces are provided for a standard setup of 220mm between
the stems.
In case of ornamental backplates or artistic spouts, please note these pipes
are not included.
You can change them for longer or shorter pieces to suit your measurements.
2 Spare cartridge stems**
Please note that the additional cartridge stems are only necessary if you wish
to fit to a depth of between 58mm-78mm
*3 Threaded tubes.
Please cut these as per your needs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>