ASUS 90GC01D0-BGP000 Foldable Mobile Gaming Controller User Guide
- June 22, 2024
- Asus
Table of Contents
ASUS 90GC01D0-BGP000 Foldable Mobile Gaming Controller
Product Information
Specifications
- Product Name: Foldable Mobile Gaming Controller – ROG TESSEN
- Quick Start Guides Available in: SK, DA, FI, NO
Product Usage Instructions
Unboxing
When you receive your Foldable Mobile Gaming Controller, carefully unbox
the product and ensure all components are included.
Charging
Before first use, make sure to charge the controller fully using the
provided charging cable. Indicator lights will show the charging status.
Pairing with Mobile Device
Follow the pairing instructions in the manual to connect the controller to
your mobile device via Bluetooth or other specified method.
Gaming Controls
Use the controller buttons and joysticks to navigate through games and
control gameplay. Refer to the manual for specific button functions.
Folding and Storage
After use, fold the controller according to the instructions provided for
easy storage and transportation.
FAQ
-
Q: How do I reset the controller?
A: To reset the controller, locate the reset button (if available) and press it with a small tool like a paperclip for a few seconds. -
Q: Can I use this controller with multiple devices?
A: Yes, you can pair the controller with multiple devices, but make sure to disconnect from one device before connecting to another.
Foldable Mobile Gaming Controller
ROG TESSEN
Quick Start Guide
Package Contents
Device features
Top view
Bottom view
- Clickable left/right analog stick
- Directional Pad (D-Pad)
- L1 / R1 bumpers
- USB-C® connector
- Action buttons (A, B, X, Y)
- Rubber support pad
- Options button
- Home button
- ROG button
- Menu button
- L2 / R2 triggers
- M1 / M2 rear paddles
- USB-C® port
- ROG Aura RGB LED
- ROG foldable hinge
Installing your phone on the controller
With the innovative ROG foldable design, you can install your phone
effortlessly on the controller without the fear of damaging the connector.
NOTE: You can select proper rubber support pads that came with your package to enjoy seamless plug-and-play functionality without removing your phone case.
Follow the steps below to install your phone to the controller:
-
(Optional) Use the chart below to quickly measure the thickness of your phone (with or without a phone case) and select the correct left-side and center rubber pads. If your phone is thicker than 11mm, it’s unnecessary to install the right-side pad.
Left pads Right pad
-
(Optional) In the rubber pads to the controller:
Align the holes (for left-side and center pads) or the USB-C® connector (for right-side pad) on the controller to install the rubber pad respectively. When done, press all corners to make sure that the pads are firmly secured.
NOTE: You can use a coin or a card to press the area beside the USB-C® connector.
-
Install your phone (with or without a phone case) to the controller:
-
Fold the left part of the controller.
-
Insert the USB-C® port of your phone to the USB-C® connector on the controller.
-
Flip up the left part of the controller and lock the phone.
Customizing your ROG Tessen
Remapping rear paddles on the fly
- Press the ROG button and one of the rear paddles (M1/M2) simultaneously and then release.
- Wait for the LED to flash blue rapidly, then press the button you want to reassign to the rear paddle in 10 seconds.
NOTE : After a timeout period of 10 seconds, the LED will return to the previous state and the setting will be terminated.
Customizing with Armoury Crate
- Scan the code to download and install Armoury Crate app.
- Launch Armoury Crate and follow the instructions to customize your ROG Tessen.
Playing and charging simultaneously
The 18W pass-through fast-charging port lets you keep playing without worrying
about your phone’s battery.
NOTES
- The controller does not contain a battery. It can be powered by the phone, or by the charging port when the phone is charging.
- Charging speed may vary depending on the phone type, battery level, cable, and the adapter you used.
- For optimal 18W (9V/2A) fast charging, use a USB-C® to USB-C® cable and an adapter that supports 18W charging, otherwise it will be limited to a maximum of 5W (5V/1A).
- If pass-through charging is not functioning, attempt the following steps: remove the phone from the controller, connect the USB-C® cable to the controller first, and then re-connect your phone.
- Certain mobile phones may not be compatible with the pass-through charging function.
Sleep mode
When the controller is idle for 5 minutes, it will enter sleep mode to
preserve your phone’s battery, and the RGB lighting automatically turns off.
To awaken the controller, simply press any digital key such as ABXY, D-pad or
L1/R1 bumper. However, pressing
analog keys such as L2/R2 (triggers) or moving the left/right analog sticks
will not activate the controller.
Reusable controller stand
Follow the steps below to reuse the package as a controller stand:
- Separate the controller stand along the dotted line on the bottom using an appropriate tool.
- Remove part b a from the stand.
- Place the controller on the stand.
Safety Guidelines
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
When the device exceeds the maximum temperature, unplug or switch off the
device to let it cool down.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively
responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
-
This device may not cause harmful interference.
-
This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
KC: Korea Warning Statement
CE Mark Warning
English ASUSTeK Computer Inc. hereby declares that this device is in
compliance with the essential requirements and other relevant provisions of
related Directives. Full text of EU declaration of conformity is available at:
www.asus.com/support
Simplified UKCA Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of related UKCA
Directives. Full text of UKCA declaration of conformity is available at:
www.asus.com/support
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions.
****DO NOT throw the device in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. The symbol of the
crossed out wheeled bin indicates that the product (electrical, electronic
equipment and mercury-containing button cell battery) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.
ASUS contact information ASUSTeK COMPUTER INC.
ASUSTeK COMPUTER INC.
Address 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site https://www.asus.com
Technical Support
Telephone +86-21-38429911
Online support https://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address 48720 Kato Rd., Fremont, CA 94538, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site https://www.asus.com/us/
Technical Support
Support fax +1-812-284-0883
Telephone +1-812-282-2787
Online support https://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkortstrasse 21-23, 40880 Ratingen, Germany
Web site https://www.asus.com/de
Online contact
https://www.asus.com/support/Product/ContactUs/Services/questionform/?lang
=de-de
Technical Support
Telephone (DE) +49-2102-5789557
Telephone (AT) +43-1360-2775461
Online support https://www.asus.com/de/support
