CRUX 17470 Hot Air Popcorn Maker Instruction Manual

June 9, 2024
CRUX

CRUX 17470 Hot Air Popcorn Maker

CRUX 17470 Hot Air Popcorn Maker

IMPORTANT  INSTRUCTION

  • Do not touch hot surfaces. Use handles. Always wear oven mitts or use potholders to handle hot appliances.
  • To protect against electrical shock, do not immerse cord or plugs, or popper base in water or other liquids.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance if the cord is damaged. Do not use this appliance if the unit malfunctions, if it is dropped or has been damaged in any manner.
  • The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
  • Do not use outdoors or for commercial purposes.
  • Do not let cord hang over the edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Never leave the Popcorn Popper unattended when it is plugged into an outlet.
  • Always add raw kernels to the fully assembled Popcorn Popper before turning ON.
  • Never add more than one measuring cap/butter tray of kernels (1⁄3 cup) into the popping chamber at one time. DO NOT OVERFILL.
  • To turn the Popcorn Popper OFF, Press the ON/OFF switch to OFF (O). Then remove plug from wall outlet.
  • Do not use appliance for other than intended use.
  • Extreme caution must be used when removing popped popcorn.

CAUTION

  • If this appliance begins to malfunction during use, immediately press the ON/OFF switch to OFF (O) and unplug the cord. Do not use or attempt to repair the malfunctioning appliance.
  • CAUTION: Never place the Popcorn Popper’s clear lid or plastic lid cap in a microwave oven.
  • NEVER use near water, damp or high humidity area. NEVER put your face near the unit while popcorn is popping (especially near the chute). Stay at least 40 inches away from the Popcorn Popper while corn is popping. Extra caution is necessary when using this product near small children or pets.
  • NEVER put your hand in the unit while popcorn is popping.
  • Wait at least 15 minutes after the unit has been turned OFF.
  • Remove all un-popped kernels in the popping chamber before filling with fresh kernels or next batch.
  • Never use microwave popcorn in this appliance. Use traditional kernels only

NOTES ON THE PLUG This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

  • A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
  • Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
  • If a long detachable power-supply cord or extension cord is used:
  • The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance;
  • If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord; and
  • The longer cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over.

PLASTICIZER WARNING

To prevent Plasticizers from migrating from the finish of the counter upper or table upper or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the counter upper or table upper. Failure to do so may cause the finish to darken; permanent blemishes may occur, or stains can appear.

ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Getting to Know Your Popcorn Popper

  1. Measuring Cap/Butter Tray
  2. Hot Air Vents
  3. Popcorn Popper Lid
  4. Chute
  5. Popping Chamber
  6. Popcorn Popper Base
  7. ON/OFF Switch

Before Using for the First Time

  • Carefully unpack the Popcorn Popper and remove all packaging materials.
  • Wash measuring cap/butter tray and clean Popcorn Popper lid in warm, soapy water; rinse and dry thoroughly.
  • Place the Popcorn Popper base on a clean, flat, heat-resistant working surface.
  • During popping, the unit gets hot. Make sure the surface is able to withstand heat or use a trivet to protect the working surface.
  • Wipe with a clean, damp cloth and dry thoroughly

Operating Instructions

  • Remove Popcorn Popper lid and measuring cap/butter tray. Fill one level measuring cap with kernels and add to popping chamber. One level measuring cap of popcorn kernels = 1⁄3 cup.
  • Never add more than 1 measuring cap or 1⁄3 cup of popcorn kernels to the popping chamber at one time. Do not put any other ingredients such as oil, shortening, butter, margarine, salt or sugar into popping chamber as damage will occur.
  • Do not overfill.
  • Place Popcorn Popper lid onto the Popcorn Popper base, positioning bottom edge of
  • Popcorn Popper lid into grooves of the base. Place measuring cap/butter tray onto Popcorn Popper Lid.
  • Never pop corn without Popcorn Popper lid and measuring cap/butter tray in position.
  • Place a 4-qt. or larger bowl or rectangular container under the chute. The bowl should not be more than 6 inches high, so that air can circulate freely under the chute.
  • Choose a heat-proof bowl. If a plastic bowl is used, be sure it will withstand heat without melting.
  • A metal bowl may become hot to the touch, but it will tend to keep the popcorn warmer.
  • Plug unit into a 120 V AC outlet and press the ON/OFF switch to ON (|)
  • The measuring cap/butter tray may be used to melt butter while the unit pops the kernels. For best results, cut butter into 1⁄4-inch (0.6 cm) slices. Allow butter to come to room temperature. Never add more than 1⁄4 cup (50 ml) of butter to the measuring cap. Use the handle of the cap to remove melted butter from the lid. Always wash and dry the measuring cap/butter tray after each batch of buttered popcorn. Use a clean measuring cap to measure kernels.
  • Press the ON/OFF switch to OFF (O) and unplug the unit when popping is complete.
  • Due to variances in the popcorn type, freshness and moisture content, some popped or unpopped kernels may remain in the popping chamber after the popping has stopped.
  • To prevent scorching, unplug the Popcorn Popper without waiting for this corn to clear the unit.

For Additional Batches

  • For additional batches, unplug unit. Make sure the popping chamber is empty.
  • Carefully remove excess popcorn or remaining unpopped kernels.
  • Allow 15 minutes for the Popcorn Popper to cool before continuing to pop additional batches of popcorn.
  • Then repeat the procedure described previously.

User Maintenance Instructions
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Contact a qualified appliance repair technician if the product requires servicing.

Care and Cleaning Instructions
1. Unplug and allow unit to cool at least 10 to 15 minutes before cleaning.
2. Wash the Popcorn Popper lid and measuring cap/butter tray in warm, soapy water.
Rinse and dry thoroughly.
CAUTION: Do not wash in dishwasher.
3. Wipe the Popcorn Popper base, including the popping chamber, clean and dry with a soft
dry cloth.
4. Never immerse the Popcorn Popper base in water or other liquid.
5. Do not scour surfaces with steel wool or abrasive cleaners.
Storing Instructions
1. Unplug unit and allow to cool.
2. Store fully assembled with Popcorn Popper lid in place.
3. Store in its box or in a clean, dry place.
4. Never wrap cord tightly around the appliance. Do not put any stress on cord where
it enters unit, as this could cause cord to fray and break

Recipes

Chocolate Popcorn Pizza Pie

  • 4 cups popped corn
  • 2 cups miniature marshmallows
  • 2 tablespoons butter
  • 2 (1 oz.) envelopes Swiss Miss® Milk Chocolate Hot Chocolate Mix
  • 1 cup chocolate covered peanuts
  • Spray a 9″ deep pie plate and set aside.
  • Pop corn and add to a large mixing bowl.
  • Melt butter in a medium saucepan over medium heat. Add mini marshmallows.
  • Stir constantly until melted. Add both envelopes of Swiss Miss Hot Chocolate and mix well.
  • Pour chocolate marshmallow mixture over the popcorn. Add chocolate covered peanuts and use a spoon to mix.
  • Spoon coated popcorn into the pie plate.
  • As the mixture cools enough to handle, rub butter or spray a small amount of oil onto your hands and work with the mixture, pressing into the sides of the pie plate.
  • Allow popcorn pizza to cool. Cut into wedges and enjoy!

Maple Tasty Popcorn Treat

  • 4 tablespoons butter
  • 1 cup brown sugar
  • 1/4 cup maple syrup
  • 1 teaspoon vanilla extract
  •  8 cups popped popcorn
  • 2 cups roasted salted cashews
  • Place all ingredients except popcorn in a medium microwave safe bowl. Heat 1 minute.
  • Stir well. Heat 1 minute. Stir well. Continue until all ingredients are liquefied and well combined.
  • Place popped corn in a large aluminum pan. Add the cashews.
  • Pour the liquid mixture over the popcorn. Using 2 spoons, mix so that the sweet gooey coating covers all the popcorn and nuts

Warranty

Limited Two-Year Warranty

SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days in respect to non-mechanical parts. At its sole discretion, SENSIO Inc. will either repair or replace the product found to be defective, or issue a refund on the product during the warranty period The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.

Exclusions

The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God such as fire, floods, hurricanes, or tornadoes. SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province and/or jurisdiction.

How To Obtain Warranty Service:

You must contact Customer Service at our toll-free number: 1-866-832-4843. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc. Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CRUX User Manuals

Related Manuals