AMEWi 22595 Rc Forage Harvester With Corn Header Light and Sound User Manual

: June 9, 2024
: AMEWi

Table of Contents

22595 Rc Forage Harvester With Corn Header Light and Sound
Declaration of Conformity
Security and Hazard Warnings
Battery Notice and Battery Disposal
Disposal
Install the controller batteries
Charge the battery pack
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

22595 Rc Forage Harvester With Corn
Header Light and Sound
User Manual

MAXIMUM TRANSMITTING POWER DATA
Operation Frequency: 2407-2475 MHz
Maximum Radio Frequency power: Maximum peak power: 5dBm

Declaration of Conformity

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing european and national guidelines. The Declaration of Conformity has been proofed. AMEWI TRADE GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU (RED).
The declarations and documents are stored at the manufacturer and can be requested and applied there.
The full text of the declaration of conformity can be found at: https://amewi.com/Konformitaetserklaerungen
For additional questions to the product and conformity please contact: AMEWI TRADE GmbH Nikolaus-Otto-Str. 18, 33178 Borchen or via the website amewi.com

Security and Hazard Warnings

Warning! For damage, caused by disregarding of the manual, warranty expires !
We are not liable for secondary failures, material or personal damage, caused by inproper usage or disregarding the security no es.
Warning! Based on security and registra on (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
Warning! Small parts. Danger of suﬀoca n or risk of injury caused by small parts.

Battery Notice and Battery Disposal

Warning! Battery do not belong in childrens hands. A change of the battery has to be done by an adult person.
Never mix chargable batteries with non-chargable batteries. Never mix fully charged batteries with almost emtpy batteries. Never mix batteries of different capacities. Never try to charge dry batteries. Take care of the correct polarity. Defective batteries belong to special waste. Never leave a charging battery unattended. For questions about the charging time please read the manual or ask the manufacturer.

Disposal

The company AMEWI is registered below the WEEE Reg. Nr. DE93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage.
Please dispose the product at the end of the lifetime accroding to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden !
Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
Additional notations for the critical heavy metal are: Cd=Cadmium, Hg=Quecksilver, Pb=lead (Label is placed on the batteries, for example below the bottom left trash symbols).
Based on RoHS labeling the manufacturer confirmes, that all limit values were taken care of at the time of manufacturing.
Batteries labeled with the recycling symbol can be put into used battery collecting tank.
(Most supermarkets have)
They are not allowed to be put into local household garbage.
AMEWL is involved in the dual system for boxing over the company Firma Landbell AG.
All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The Involvement in a Dual Systems helps to save CO? Emissions.

Install the controller batteries

Install Battery pack (Rechargeable) In the car

Unscrew the screw and remove the battery compartment cover.
Connect the 3.7V Li-Ion battery (included) and insert it into the battery compartment. Close the battery compartment again.

Now you can drive

Set the switch of the car to the “ON” mode.
Turn on the controller. The LED on the controller will flash, and then turn off in several seconds, indicating that the controller is successfully matched to the car. The LED is on when the controller works.