lorelli 1028021 Trinity WI-FI Camera Instruction Manual

lorelli 1028021 Trinity WI-FI Camera

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

CAUTION!

1. This product is an aid. It should not be used as a medical camera and should not replace adult supervision.

2. Never leave your child at home alone. You MUST chock your child’s condition regularly, do not leave them unattended by an adult.

3. This device is not intended for use by people (including children) with impaired physical perception or mental irnpairrnenls or wilhout experience and knowledge if they are left without supervision and have not been instructed by a person in charge of their safety about Iha way or using lhis dovico.

4. The product is not a toy. Do not let your children play with it!

5. Use this product only for its intended purpose, as described in this instruction manual.

6. Caution! The power cord of the camera must be plugged into an electrical socket located as far as possible from your baby. Place the camera as far as possible from your baby. Cables are a polenlial slrangulalion haLard. They rnusl ba localed in a place inaccessible to children (at a distance of at least 1 meter).

7. Never place the camera in or over a baby’s bed or crib.

8. If you placo lhe camora on a tablo or low cabinol, do nol lel tho power cord hang over the edge of the table or worktop.

9. Do not submerge the camera, its power cord, or any part of the product in water or any other liquid.

10.  Do not touch a device that has fallen into water. If such an incident occurs, immediately unplug the cord of the power adapter if it was connected to the mains electricity.

11. Do not place the device in locations where water or other liquids may come into contact with it.

12. Never use the camera in damp places or near water, a bathtub, sink, wet room, etc.

13. Do not use the product in a highly polluted/dusty environment
    This will shorten the life of the device.

14. Never place objects on the camera and never cover it.

15. Do not block the ventilation openings. Install in accordance with the manufacturer’s instructions.

16. Before you connect the power cord of the product to the socket, ensure that the voltage marked on the adapter corresponds to that of the local power supply.

17. Poweradapter AC 100-240 V, 50/60 Hz, 0.3 A.

18. Do not use the adapter if the cord or plug is damaged.

19. To avoid tho risk or oloctric shock, do nol opon tho camora housing.

20. Do not use the appliance if it is not working properly, if it is damaged, or if it has been dropped into water. You must contact the retailer where you purchased the product to have the fault repaired.

21. Do not attempt disassembly or repair of the device at home, lhis should bo dono only in an authoriLod sorvico shop.

22. ATTENTION! Do not install or store the camera or adapter near direct sources of heat, open fore, heaters, or stoves. Do not expose the camera to too low or too high temperature or direct sunlight.

23. CAUTION I Use and store the device at temperatures from 2o·c to 40C.

24. Tho vidoo connoction is oslablishod via an lntornol notwork.
    We recommend that you ensure the safety of your personal data.

25. Caution! Suffocation hazard! Keep the plastic packaging away from childron.

26. This product contains small parts which can be a choking ha7ard. Assembly or installation by adults is required. Keep the small parts away from children when assembling.

27. Use only the power cord supplied by lhe manufacturer/importer.

28. To prevent an accident, replace a damaged adapter with an original ono.

29. Do not try to modify the camera/adapter or to repair them by yourself in case of damage. For advice, contact an authori7ed sorvico contro or tho rotail outlot where you bought tho product.

30. Do not use spare parts what are not original spare parts provided by the manufacturer or importer.

31. The illustrations in the instruction manual are only for reference and can differ from the actual product.

SAFETY TIPS

• Unplug the product during thunderstorms.
• It is important to check the operating range and condition of the camera on initial installation and regularly after that.
• Check the power supply regularly. Test the camera before use and after changing camera location.
• This product is intended for indoor use only.
• Do not cover any ventilation openings.
• Do not touch the plug pins with sharp or metal objects.
• To improve camera performance do not place the lens against or next to reflective surfaces, such as windows or white walls, because this will result in an overly bright image in areas close to the camera and darker image in areas further away from the camera or will make the camera produce white images.
• Make sure the camera is installed in an area with strong Wi-Fi signal.
  Do not place the camera near objects that may affect Wi-Fi signal, such as metal objects, microwave ovens.
  NOTE: The app version may have been updated, please follow the instructions of the current app version. When an important version update has been made, you will receive a push notification reminding you to update the app.

CLEANING AND CARE

1. Do not wash the camera or the adapter with water. Do not use cleaning sprays or liquid detergents.
2. Do not use sharp objects or aggressive detergents to clean the device.
3. Before cleaning the camera you must unplug it.
4. Clean the camera lens only with a dry cloth. Clean the other parts of the camera with a damp soft cloth. Afterwards dry well with a dry soft cloth.
5. Before turning on the camera ensure that is it dry.
6. Unplug the device when not in use for extended periods of time, store the camera and its adapter in a cool dry place.
7. Caution! Keep the product away from children.
   All products marked with this symbol are waste electrical and electronic equipment (WEEE) (Directive 2012/19/EU) which should not he mixed with unsorted household waste. You must protect human health and the environment by handing in your waste electrical and electronic equipmont to designated collection points. Refer to the recycling recommendations of your local authorities.

In the Box Image 1

1. Camera,
2. Adapter,
3. Power cord,
4. Mounting bracket,
5. 3 pcs screws and anchors.

Device Image 2

1. infrared light,
2. Status light.
3. Microphone,
4. Memory card slot,
5. Restart button,
6. Speaker,
7. Power cord slot

Installation Picture 3

Place the camera on a horizontal and level surface or mount it on a wall/ceiling using the supplied mounting bracket, anchors and screws.

Mobile app Image. -4

To use the device, you need to install the Cloud Edge app on your mobile device. Cloud Edge is available for IOS and Android products. Scan the QR code to det the app directly.

INITIAL APP SETTING AND CONNECTION Image Group 5

• Step 1-Open the application, tap ‘”Sign up now” to register by filling out the necessary information. If you already have a registration, lap “Log in” lo log in to the application
• Step 2-Enter a valid email address and check the privacy agreement. tap “NEXT’ Enter a username and password, tap “Done.”
• Step 3-Tap the Add icon or lap “Add device”, select “Baby Camera”
• Step 4 Plug in the camera and press “Next”
• Step 5 Pross and hold the “Restart” button until you hoar a beep, the tap “Next”
• Step 6 Select the Wi-Fir network and enter the password, tap “Next”
• Step 7 Scan the QR code on your phone with the camera from a distance of about 15-25 cm and tap “Next” when the camera beeps, connecting may take up to 30 seconds.
• Step 8 The camera is now connected to your device, lap “Next”
• Step 9 By tapping “Next/Done” or ‘”Skip” you can review the next pages with tips and suggestions, you can change the name of the camera by tapping “ “, tap “Done”

Functions Image 6

1. Screenshot capturing a screenshot
2. Intercom two-way audio connection
3. Record video recording
4. Motion Detection detection and tracking of movement
5. Lens Switch switching off the lens
6. PTZ Manual control of the monitoring direction.
7. (on the next page) Gallery Saved images and videos
8. Settings menu

Settings menu Image 7

1. Device information
2. Receive event notification-on/off
3. App installation guide
4. Device sharing
5. Location management
6. Network operation indicator on/off
7. Image settings
8. Human detection and tracking on/off
9. Privacy protection
10. Alarm management
11. Recordings management
12. Cloud settings
13. ONVIF settings
14. Software version check
15. Removal of device from the app

FREQUENTLY ASKED QUESTIONS

Q: The device cannot be visualized properly?
A: Ensure that everything is okay with the network, you can place the device closer to the router. If this does not work, it is recommended to restart the device and add it again.

Q: Why is the device still in the list of devices after restarting?
A: Restarting the device only resets the network configuration of the camera, but cannel change the configuration in the app, you need to delete the camera from the app.

DECLARATION OF CONFIRMITY

CUSTOMER SERVICE

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com

Unic importator in Romania
DIDIS INTERNATIONAL
Strada Sfantul Pantelimon
Nr.1 Oras Pantelimon, Judetul Ilfov
Phone: +40 21 211 65 60
Fax: +40 21 210 65 62
E-mail: office@didis.ro

www.lorelli.eu

find us on

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>