Breville Control Grip Blender Instruction Manual

: June 4, 2024
: Breville

Table of Contents

Breville Control Grip Blender
IMPORTANT SAFEGUARDS
Components
Functions
Care & Cleaning
Food Preparation Guide
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Breville Control Grip Blender

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

Remove and safely discard any packaging materials and promotional labels before using the appliance for the first time.
To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
To protect against electrical shock, do not immerse the power cord, power plug or motor body in water or any other liquid.
Do not place the appliance on or near a hot gas or electric burner, or where it could touch any other source of heat.
Unwind the power cord fully before use.
This appliance has a polarized plug ( one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Do not allow the power cord to hang over the edge of a table or counter, touch hot surfaces or become knotted.
Always make sure the appliance is completely and properly assembled before operation.
Always ensure that the attachments are securely fitted onto the motor body before operation. Follow the instructions provided in this book.
Handle the appliance and attachments with care – blending blade and chopping bowl blade are very sharp. Handle carefully and keep out of reach of children.
To reduce the risk of injury, always insert the chopping blade into
the chopping bowl,
then ensure the lid is securely attached before connecting to the motor body and operating.
Never process ICE or other hard foods such as coffee beans, rice, frozen foods, spices, cereal, or chocolate bars in the chopping bowl as damage to the blades may result.
Do not use attachments other than those provided with the appliance. The use of attachments not sold or recommended by Breville may cause fire, electric shock or injury.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
If using the appliance
to blend hot food in a saucepan, remove the saucepan from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly before blending. The appliance should be kept away from any heat source.
Extreme caution must be used when moving an appliance or container filled with hot oil or other hot liquids.
Do not touch surfaces that may be hot. Use handles or knobs provided.
When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage.
Keep hands and utensils away from the moving blending blade and chopping bowl blade while blending/chopping to prevent the possibility of severe injury to persons or damage to the appliance. A spatula may be used, but must be used only when the appliance is not running.
If food becomes lodged around the blending blade or in the blade guard, release the trigger switch, unplug the power cord and remove the blending shaft from the motor body. Use a spatula to dislodge the food. Do not use fingers as blending blade is sharp.
Do not remove the appliance from ingredients during operation. Ensure the trigger switch has been released and the motor has completely stopped before removing.
Avoid contacting moving parts.
To turn the appliance off, release the trigger switch and remove the plug from the power outlet. Remove the plug from the power outlet if the appliance
is to be left unattended, if not in use, before attempting to move
the appliance, before cleaning, disassembling, assembling and when storing the appliance.
Do not operate this appliance for longer than 1 minute at a time as this can cause overheating. Allow to cool for at least 1 minute between each use.
Never mix dry, thick
or heavy mixtures for more than 15 seconds. Stop operation and stir the ingredients before continuing. Allow the motor to rest for 1 minute between each use.
Strictly follow the care and cleaning instructions described in this book.
This appliance is for household use only.
Do not use the appliance for anything other than its intended purpose as described in this book. Do not use outdoors.
Do not use in moving vehicles or boats.
Do not leave the appliance unattended when in use.
This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack
of experience and knowledge.
Close supervision is necessary when any appliance is used near children.
Children should be supervised to ensure that they do not play with the appliance.
• Regularly inspect the power cord, power plug and actual appliance for any damage. Do not operate if damaged in any way or after the appliance malfunctions. Immediately cease use of the appliance and visit www.Breville. com or call Breville Consumer Support at 1- 866-BREVILLE for examination, repair or adjustment.
For any maintenance other than cleaning, visit www.Breville. com or call Breville Consumer Support at 1- 866-BREVILLE.

SHORT CORD INSTRUCTIONS

Your Breville appliance

is fitted with a short power supply cord to reduce personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord.
If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

BREVILLE ASSIST® PLUG
Your Breville appliance comes with a unique Assist® Plug, conveniently designed with a finger hole to ease removal from the power outlet.

Components

Breville-Control-Grip-Blender-fig-1

A. Motor body
B. Speed control dial
C. Control grip trigger switch
D. Blending shaft
E. Stainless steel blending blade
F. Chopping bowl
G. Stainless steel chopping blade
H. Chopping bowl lid
I. Blending jug
J. Whisk
K. Dual-purpose storage lid and anti-slip mat

Functions

BEFORE FIRST USE

Remove any packaging material and promotional labels. Remove the blending shaft from the motor body and wash it in warm soapy water (follow the instructions
“To detach the blending shaft”). Rinse and dry thoroughly. Ensure no water remains inside the blending shaft to avoid water running into the motor body when reattached.
Disassemble and wash the chopping blade, chopping bowl chopping bowl lid, whisk, storage lid and blending jug in warm soapy water, rinse and dry thoroughly. Ensure no water remains in the chopping bowl lid or whisk attachment to avoid water running into the motor body when reattached

NOTE
The detachable blending shaft, chopping bowl, chopping blade, blending jug, whisk and dual purpose storage lid/anti-slip mat can also be washed in the dishwasher. The chopping bowl lid, whisk gearbox and motor body are not dishwasher safe – see the care and cleaning section of this booklet for cleaning instructions of these parts.
This stick blender is a versatile appliance that can be attached to:

The stainless steel blending shaft- for use as an immersion blender.
The chopping bowl with chopping blade and lid – for use as a mini chopper.
The whisk attachment – for use as a hand whisk.

IMMERSION BLENDER

To attach the blending shaft
Hold the blending shaft with the blades down, and align the top end of the blending shaft with the corresponding end of the motor body and push until the blending shaft ‘clicks’ and locks onto the motor body. Always ensure blending shaft is dry with no water left inside before reattaching.

To use as an immersion blender Ensure the blending shaft is assembled to the motor body as detailed above.

Place food to be processed into the blending jug provided ( or a sufficiently large mixing bowl or saucepan). The jug provided should only be ½ full or less when blending liquids or when making a puree of fruit and/or vegetables.
Insert the plug into a 110/120V power outlet.
By turning the speed control dial at the top of motor body, select a speed between 1 and 15.
- Low Speed: 1
- High Speed : 15
NOTE
If selecting a high speed, it is recommended that you start with a slow speed and gradually increase to the higher speed to avoid splattering and over-processing.
Place the blending shaft as deeply as possible into the blending jug and press the trigger switch to turn the stick blender on. The button must be held for the required duration of operation.
Work through the ingredients in the blending jug with a gentle raising and lowering motion.
When processing has fmished switch off the motor by releasing the trigger switch and remove the power plug from the power outlet.
Ensure the blade has completely stopped before lifting the stick blender out of the blending jug.

To detach the blending shaft
Ensure the trigger switch is released and unplug the power plug from the power outlet.
Hold the motor body with one hand and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the blending shaft to detach.

Recommendations when using as an immersion blender

The stick blender mixes foods and liquids rapidly, therefore it is easy to over-process. Remember to periodically release the trigger switch and check food throughout operation.
Allow food to cool slightly (so not boiling) before blending.
The blending shaft allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy. For safety reasons, remove the saucepan from the heat source before processing.
Ensure the motor body of the appliance and power cord are kept away from any heat source.
When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.
Warm all liquids to be added to soups and purees, this will ensure even blending.
Place the blending jug on the anti-slip mat during blending. This will keep the blending jug stable.
Do not operate the stick blender continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.
DO NOT place stick blender in chopping bowl to process ingredients.

If food becomes lodged around the blending blade or in the blade guard, follow these safety instructions:

Release the trigger switch and unplug the power plug from the power outlet.
Use a spatula to carefully dislodge the food Do not use fingers as the blending blade is sharp.
After the food has been removed and blades are clear, plug the appliance back into the power outlet and continue blending.

MINI CHOPPER

To attach the chopping blade, chopping bowl and chopping bowl lid
Remove the blending shaft from the motor body (follow the instructions on page 10 “To detach the blending shaft”).
Place the chopping blade onto the metal pivot pin in the base of the chopping bowl. Place the food inside the chopping bowl. Do not exceed the maximum ‘MAX’ marking.
Place the lid onto the chopping bowl
Align the motor body with the chopping bowl lid and push down until the motor body ‘clicks’ into place. Ensure the chopping bowl lid is dry with no water left inside before reattaching.

NOTE

Always place the chopping blade onto the pivot pin on the bottom of the chopping bowl BEFORE placing any food in the bowl. Do not lift the blade before the complete chopping operation is finished.

TO USE THE CHOPPING BOWL

Ensure the chopping bowl is completely and properly assembled

Place food to be processed into the chopping bowl. Do not exceed the ‘MAX’ marking on the chopping bowl
Insert the plug into a 110/120V power outlet.
By turning the speed control dial at the top of motor body, select a speed between 1 and 15.
- Low Speed: 1
- High Speed : 15
Press the trigger switch to turn the mini chopper on. The button must be held for the required duration of operation.
When processing has finished switch off the motor by releasing the trigger switch and remove the power plug from the power outlet.
6. Ensure the blade has completely stopped before removing the lid from the chopping bowl. Carefully remove the chopping blade and use a spatula to scrape off any attached food back into the chopping bowl. Use the spatula to remove food from the chopping bowl.

To detach the chopping bowl and lid

Ensure the trigger switch is released and unplug the power plug from the power outlet.
Hold the motor body with one hand and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the chopping bowl lid to detach.
Recommendations when using the stick blender with the chopping bowl

Do not operate the chopping bowl when empty.
The anti-slip mat keeps the chopping bowl stable, however it is recommended during processing to hold the motor body with one hand and the chopping bowl and lid with the other.
When processing, cut food into uniform sizes to ensure quicker, even and more consistent results.
To avoid damage to the chopping/mixing blade, do not process, or grind hard items such as frozen foods, ice, cereals, rice, spices, chocolate bars or coffee beans.
DO NOT process boiling or hot foods in the chopping bowl
NEVER remove the blade from the chopping bowl before food processing is completed
The chopping bowl blends foods and liquids rapidly, therefore it is easy to over process. Remember to periodically release the trigger switch and check food throughout operation

WHISK

To attach the whisk
Remove blending shaft from motor body (follow the instructions on page 10 “To detach the blending shaft”.).
Align the top end of the whisk gearbox with the corresponding end of the motor body and push until the whisk ‘clicks’ and locks onto the motor body.Ensure the whisk gearbox is dry with no water left inside before re-attaching.

To use the whisk

Ensure the whisk is completely and properly assembled

Place food to be whisked into the blending jug or a sufficiently large mixing bowl or container.
Insert the plug into a 110/120V power outlet.
By turning the speed control dial at the top of motor body, select a speed between 1 and 15.
- Low Speed: 1
- High Speed : 15
Place the whisk into the blending jug and press the trigger switch to turn the whisk on The button must be held for the required duration of operation
Move the whisk through the ingredients in the blending jug with a gentle raising and lowering motion until desired texture is achieved
When whisking has fmished, switch off the motor by releasing the trigger switch and remove the power plug from the power outlet.
Ensure the whisk has completely stopped rotating before lifting the whisk out of the blending jug.

To detach the whisk
Ensure the trigger switch is released and unplug the power plug from the power outlet.
Hold the motor body with one hand and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the whisk to detach.

Recommendations when using the stick blender with the whisk attachment

Do not allow the whisk to hit the bottom or sides of mixing bowl while the appliance is in operation, as this may damage the whisk.
To incorporate air into the ingredients when whisking, use a sufficiently deep, wide container and move the whisk through the ingredients with a gentle raising and lowering action
Place the mixing bowl on a damp cloth during whisking. This will keep the mixing bowl stable.
Always use fresh chilled cream and fresh eggs at room temperature to achieve greater and more stable volume when whisking.
Always ensure the whisk and mixing bowl are completely clean and free of fat before whisking egg whites.
It is recommended to use the highest speed when whisking egg whites and cream.

Care & Cleaning

MOTOR BODY

Remove the power plug from power outlet before cleaning. To remove any food residue, wipe the motor body and cord with a damp cloth only. Do not use abrasive cleaners or steel wool. Never immerse the motor body in water or any other liquid. Do not place motor body in dishwasher.

BLENDING SHAIT

Remove the power plug from power outlet before cleaning. Remove the motor body from the blending shaft. The blending shaft can be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the blending shaft can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.
QUICK WASH: Between each processing task, with the motor body attached, place the blending shaft and blending blade only into a jug of water and press the trigger switch to turn on for 5 seconds. This will remove any food on the blending blade and allow you to continue onto the next processing task

CHOPPING BOWL, CHOPPING BOWL LID, CHOPPING BLADE AND STORAGE LID/ANTI-SLIP MAT

Remove the power plug from power outlet before cleaning. Remove the motor body from the chopping bowl lid, and then remove the chopping bowl lid and chopping blade from the chopping bowl.
The chopping bowl, chopping bowl lid and chopping blade should be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the chopping bowl and chopping blade can be washed in the dishwasher. Do not wash the chopping bowl lid in the dishwasher. Do not use abrasive cleaners or steel wool

WHISK

Remove the power plug from power outlet before cleaning. Remove the motor body from whisk. The whisk can be hand washed in hot soapy water, rinsed and dried thoroughly after each use.
Alternatively, the whisk can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.
Remove the whisk from the whisk gearbox before placing in the dishwasher.

NOTE
The whisk gearbox is not dishwasher safe.

BLENDING JUG AND STORAGE LID/ ANTI-SLIP MAT

The blending jug and storage lid/anti-slip mat can be hand washed in hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the blending jug and storage lid/anti-slip mat can also be washed in the dishwasher. Do not use abrasive cleaners or steel wool.

STORAGE

Remove the power plug from power outlet before storing. Ensure the appliance is clean and completely dry.
Insert the chopping blade into the chopping bowl then attach the chopping bowl lid. Place the assembled chopping bowl inside the blending jug. Attach the storage lid/anti-slip mat to the bottom of the blending jug.

Food Preparation Guide

Milkshakes, smoothies, cocktails, fruit frappes

Soups, dips, baby food

| Blending shaft

Blending shaft

| mid to

maximum mid to

| 30 seconds

30 seconds

| Use Chilled milk. Blend until

desired consistency is achieved.

Blend until smooth.

---|---|---|---|---
Cheese| Chopping bowl| maximum| 20·30 seconds| Maximum weight ½ 1b/200g,

pre-cut into¾ inch/2cm cubes

Carrot| Chopping bowl| maximum| 20-30 seconds| Maximum weight ½ 1b/200g,

pre-cut into¾ inch/2cm cubes

maximum

| 20·30 seconds| Maximum weight ½ 1b/200g,

pre-cut into¾ inch/2cm cubes

Ice| Blending leg| maximum| 20-30 seconds|
Cream (1 ½ cup/400ml

maximum)

| Whisk| mid to maximum| 20-30 seconds|
Egg whites (4 eggs

maximum)

Do not operate the immersion blender continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use. This is especially important when mixing dry, thick or heavy mixtures. Never mix for more than 15 seconds. Stop operation and stir the ingredients before continuing.