PCE-DT 50 Handheld Tachometer User Manual

: June 9, 2024
: PCE

Table of Contents

PCE-DT 50 Handheld Tachometer
Safety notes
Specifications
System description
Operation
Contact
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

50 Handheld Tachometer
User Manual PCE DT 50 Handheld Tachometer

PCE-DT 50 Tachometer
Last change: 22 December 2020
v1.0

PCE-DT 50 Handheld Tachometer

User manuals in various languages can be found by using our
product search on: www.pce-instruments.com

Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.

The device must only be used as described in this instruction manual. If used otherwise, this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative humidity, …) are within the ranges stated in the technical specifications. Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualified PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be exceeded under any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to the user.

We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual.

Specifications

2.1 Technical specifications

Measurement range	2.5 … 99,999 rpm (RPM)
Measurement accuracy	± 0.02% + 1 digit
Resolution	2.5 … 999 rpm: 0.1 rpm

2.2 Delivery contents
1 x Tachometer PCE-DT 50
1 x 9V block battery
1 x User manual

System description

3.1 Device

PCE DT 50 Handheld Tachometer - fig

Laser
Measuring/trigger key
LC display
Product name
Display backlight
On/off key
Auto key
Max/Min/Avg key
Recording key
Battery compartment

3.2 Display description

Measurement indicator
HOLD icon
Laser icon
Battery level indicator
MAX/MIN/average value
Measured value
Measuring unit
Number of data recordings
Automatic mode
Recording icon
Data view

Operation

5.1 Switching the meter on and off:

Press the on/off key (6) to switch on the unit.
After approx. 20 s without use, the device switches off automatically.
Press the on/off key (6) to switch off the unit.

5.2 Measurement

Apply approx. 1-2 cm reflective tape to the test object that is not yet rotating.
A bright environment has a negative effect on the reflection and the measurement result. Therefore, if necessary, shade the area to be measured and avoid direct sunlight.
For a measurement, press the measuring/trigger key (2) and point the laser at the rotating object.
Be careful! Rotating components are dangerous!

5.3 Hold function

The instrument automatically switches to the hold function after the measurement.

5.4 Max/Min/Avg measured value

Press the Max button (8) once to read the maximum value of the measurement.
Press the Max button (8) twice to read the minimum value.
Press the Max button (8) three times to read the average value (AVG).

5.5 Switching the backlight on and off

Press the backlight key (5) to switch on the display backlight.
Press the backlight key (5) again to switch off the display backlight.

5.6 Auto measurement function

Press the auto key (7) to start an automatic measurement. Press the key again to exit Auto mode.
Note: The laser is permanently active in auto mode, the trigger key (2) does not need to be pressed.

5.7 Recording function

In Auto mode, press the REC key (9) to start recording.
A maximum of 60 measured values can be stored.
Press the REC key (9) again to pause the measurement.

5.8 Measuring interval in recording mode

Press and hold the REC key (9) and turn on the power to set the recording interval.
While holding down the REC key (9), press the backlight key (5) to decrease the interval time or the auto key to increase the time.
The time interval can be set from 1-99 s.

5.9 Battery

If the meter does not turn on or the battery indicator is lit, replace the 9 V battery as soon as possible.
To do this, press the arrow icon of the battery compartment and slide it down. After inserting a new battery, close the cover again. Make sure the polarity is correct.

Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact us. You will find the relevant contact information at the end of this user manual.

Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations.
If you have any questions, please contact PCE Instruments.

www.pce-instruments.com

PCE Instruments contact information

United Kingdom
PCE Instruments UK Ltd
Unit 11 Southpoint Business Park
Ensign Way, Southampton
Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
United States of America
PCE Americas Inc.
711 Commerce Way suite 8
Jupiter / Palm Beach
33458 FL USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us