BRESSER 8810500 Metal Detector Instruction Manual

June 9, 2024
BRESSER

BRESSER 8810500 Metal Detector Instruction Manual
BRESSER 8810500 Metal Detector

Operating Instructions

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

MANUAL DOWNLOAD

QR CODE
www.bresser.de/P8810500

Product Overawe

Product Overawe

General Warnings

  • Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.
  • Not suitable for children under 3 years!
  • RISK of property damage — Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
  • RISK of ELECTRIC SHOCK — This device contains electronic components that operate via a power source (batteries). Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock.
  • RISK OF CHEMICAL BURN — Keep batteries out of the reach of children! Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
  • RISK of FIRE/EXPLOSION! — Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion.
  • Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time.
  • Never recharge normal, non-rechargeable batteries. This could lead to explosion during the charging process.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Rechargeable batteries are to be removed from the toy before being charged
  • The manufacturer is not liable for damage related to improperly installed batteries

Scope of delivery
Metal detector, Instruction manual

Insert batteries
Battery Requirements: 1x Alkaline battery (9V) (not included)

Open the battery compartment with a screwdriver and follow the polarity information (+)(-) on the inside of the compartment. Do not force the battery into place with the polarity reversed because this can damage the item. Replace the battery door and tighten the door with a screwdriver.

Parts overview

  1. On/off switch
  2. Signal light / LED indicator (green/red)
  3. Battery compartment
  4. Signal tone (buzzer)
  5. Stem
  6. Locknut
  7. Search coil

Rules of metal detection

  1. Regulations for using metal detectors vary internationally. Be sure to check the local rules and laws before you start.
  2. Respect private property and do not enter without the owner’s permission.
  3. Never destroy historical or archaeological objects.
  4. If you are not sure whether you have found an object, contact a museum or historical society near you.
  5. Be sure to fill in all holes and try not to leave any damage.
  6. Remove and dispose of any rubbish and litter found.

Operation

  1.  Your metal detector comes completely assembled. You only need to install the battery (not included) in the metal detector.
  2.  To adjust the length, turn the locking ring located on the shaft of the metal detector counter-clockwise.
  3. Adjust to desired length and position the coil to be flat to the ground while in use.
  4. Turn the locking ring clockwise to lock the length of the shaft to desired position.
  5. To adjust the length of the metal detector to a smaller unit, loosen the locking rings and position the head close to the handle.

Using your metal detector:
Before powering on the device position the metal detector so the search  coil is away from any metal objects. Then turn the unit on by moving the toggle on the device away from you. You will see a green light showing the power is turned on. Your unit is self-calibrated and needs no further adjustment. Your metal detector is ready to be used in the most sensitive detection setting
Using your metal detector:

To search for metal objects, swing the metal detector back and forth slowly while keeping the search coil level and approx. 2 cm above the ground. When your metal detector locates a metal object it will start to emit a tone. The more solid and louder the tone, the stronger the signal, which indicates how close the object is to the coil. Your unit also has an signal light that will illuminate when the signal strength is strong. By using both the signal light and the signal tone you will be able to discover many amazing things just below ground.

Playfully explore the world with your metal detector:
With the metal detector, you can uncover what metal objects are hidden underground. Whether on the beach or in your garden – interesting discoveries can be made in many places. And it’s very easy to use. Go straight on a discovery tour!

When to use your metal detector:
A great time to go metal detecting is right after a heavy rain, when the ground is soft. Wet ground conducts electricity better than dry ground, so you will have a better chance of locating buried objects than you would

walking on dry ground.
This metal detector’s detection coil is water resistant, and it can be used in shallow water after a rain. However, it is recommended that you do not submerge the unit for extended time periods.

Places to search:

  1. The beach is a great place to start because you get few competing signals on a sandy beach and it will be easier to dig there.
  2. At the homes of your relatives–especially those who live in older homes.
  3. Your own front and backyards.

CAUTION: Please note that this metal detector is not designed for any military or disarming use.

Notes on Cleaning

  • Before cleaning the device, disconnect it from the power supply (remove batteries)!
  • Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.
  • Protect the device from dust and moisture.
  • Remove the batteries from the unit if it is not used for a longer time.

EC Declaration of Conformity
Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/8810500/CE/8810500_CE.pdf

UKCA Declaration of Conformity
UKCA Icon Bresser GmbH has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address:www.bresser.de/download/8810500/UKCA/8810500_UKCA.pdf Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Disposal
Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage!
As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner. Empty, old batteries must be disposed of at battery collection points by the consumer. You can find out more information about the disposal of devices or batteries produced after 6 January 2006 from your local waste-disposal service or environmental authority.

In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in the normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive.

Batteries that contain toxins are marked with a sign and a chemical symbol.

  1. battery contains cadmium
  2. battery contains mercury
  3. battery contains lead

Warranty & Service

The regular warranty period is 2 years and begins on the day of purchase. To benefit from an extended voluntary warranty period as stated on the gift box, registration on our website is required.

You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

Bresser GmbH
46414 Rhede · Germany
www.bresser.de

Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way, Edenbridge,
Kent TN8 6HF, Great Britain

BRESSER JUNIOR LOGO

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BRESSER User Manuals

Related Manuals