COLORKINETICS 3000K Blast Powercore gen5 eW Instruction Manual

: June 9, 2024
: COLORKINETICS

Table of Contents

Exterior customizable luminaire with single temperature white light
Specifications
Dimensions
Polar Candela Distribution
Illuminance at Distance
Zonal lumen
Coefficients of Utilization – Zonal cavity Method
Luminaire and Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COLORKINETICS 3000K Blast Powercore gen5 eW

Exterior customizable luminaire with single temperature white light

Blast Power core gen5, eW high-performance LED luminaires provide a high- intensity wash of white light with simplified installation. Blast Power core gen5 offers a range of accessories that allow for customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, along with the efficiency and cost effectiveness of Power core technology in a rugged die- cast aluminium housing.

Expands customization with a wide range of new accessory options. In addition to the native 6° lens, five different spread lenses can customize the luminaire to produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric) beam angles. Three housing color choices (black, gray, and white)—plus the option to add or combine a louver, rock guard, full glare shield, and half glare shield—create new aesthetic possibilities for designers and architects.
Meets ASTM B117 standard for > 1,500 hours of corrosion resistance and ANSI C136.31-2010 standard with a 3G vibration rating.
Improves durability with new flat lens that prevents water from pooling into the luminaire, keeping the LEDs protected and secure over the course of a luminaire’s lifetime.
Integrates patented Power core technology that controls power output to luminaires directly from line voltage – rapidly, efficiently, and accurately. The Color Kinetics Data Enabler Pro merges line voltage with control dataand delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost.
The Color Kinetics Data Enabler Pro merges line voltage with control data and delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost.
Universal power input range of 100 to 277 VAC.
Precision Dimming—Smooth dimming down to 1% with optional Data Enabler Pro and digital control interface.
Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager – as well as third-party controllers.
For detailed product information, please refer to the Blast Product Guide at https://www.colorkinetics.com/global/products/essentialwhite/blastpowercre- gen5-ew

Specifications

Due to continuous improvements and innovations, specifications may change without notice.

Output

Color Temperature	3000 K
Beam Angle	80°
Lumens †	2,658
Efficacy (lm/W)	57.5
CRIZ	81.7

Electrical

Input Voltage	100 to 277 VAC, auto-ranging, 50/60 Hz

Power Consumption

(Maximum at full output, steady state)

| 50/60 Hz

46.2 W

Power Factor
Surge Limits ¶| 0.9 @ 120 VAC, 0.85 @ 277 VAC

2 kV maximum differential (L to N)

4 kV maximum common (L to Gnd or N to Gnd)

For additional Surge Protection Requirements for LED Lighting Systems, please

refer to www.colorkinetics.com/KB/surge- protection.

Control

Dimmer ‡

ON/OFF; precision dimming by 4 conductor cable & Data Enabler Pro
Remote Monitoring & Management Works with Interact Landmark

Lumen Maintenance

Threshold §	Ambient Temperature	Reported ¶¶	Calculated ¶¶
L go	25 °C

50 vc

| >44,202

44.202

| >44,202

44.202

L 70| 25°C| >60,000| >100,000
| 50 °cl| >60,000| >100,000
L so| 25°C

50 °C

| | >100,000

100,000

Physical

Dimensions

(Height X Width X Depth)

| 183.7 x 337.8 x 171.2 mm (7.2 x 13.2 x 6.74 in)
---|---
Weight| 3.9 kg(8.2 lb)
Effective Projected Area (EPA)| 0.068 m2 (0.73 ft2)

(Luminaire olus Full Glare Shield)

Housing Material| Die-cast aluminium, black powder-coated finish
Lens Clear tempered glass
Luminaire Connections| 1.8 m (6 ft) unified power/data cable
Tempera tur e Ranges

-40 to 50 °C (-40 to 122 °F l Operating

-20 to 50 °c (-4 to 122 °F) Startup

-40 to 80 °C (-40 to 176 °F) Storage

Vib r ation Resista n ce

Complies with ANSI C136.31, 3G

Mechanical Impact| IK10
Co rr osionResista n ce

Complies with ASTM 8117 standard for > 1,500 hours

Humiditv| O to 95%. non -condensin1=
T h ermal Protect i on e n ab l ed

For additional Thermal Protection information, please refer to https://colorkinetics.helodocs.io/article/sh301ducix

Luminaire Run L engths
To calculate luminaire run lengths and total power consumption for your specific installation, download the Configuration Calculator from www.colorkinetics.com/support/install_tool/

Certification and Safety

Approbation	BIS
Environment	Dry/Damp/Wet Location, IP66

Correlated color temperature (CCT) complies with ANSI C78.377-2008 for the chromaticity of solid state lighting products.
Correlated color temperature (CCT) complies with ANSI C78.377-2008 for the chromaticity of solid state lighting products.
† Blast Powercore gen5, eW 4000 K lumen output measurements comply with IES LM-79-08 testing procedures. All 3000 K measurements are estimated based on Blast Powercore gen5, eW 4000 K measurements.
‡ Refer to https://colorkinetics.helpdocs.io/article/to07h0er3f for more information about dimming.
§ Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are given at B10, or the median value where 90% of the LED population is better than the reported or calculated lumen maintenance measurement.
¶ Minimum surge limits per IEC 61547, tested in accordance with IEC 61000-4-5.
†† When mounting to a junction box, the Color Kinetics wiring compartment accessory must be used to maintain a 3G vibration rating.
¶¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing procedures. In accordance with TM-21-11, Repeported values represent the interpolated value based on six times the LM-80-08 total test duration (in hours). Calculated values represent time durations that exceed six times the total test duration.
2 Blast Powercore gen5, eW, 3000 K, 100 – 277 VAC, 80° spread lens, Black housing, BIS Specification Sheet

Dimensions

Photometrics 3000 K, 80° spread lens

Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.colorkinetics.com/global/support/ies.

Beam Angle	80°
LED	3000 K
Lumens	2,658.0
Efficacy (lm/W)	57.5

Polar Candela Distribution

Illuminance at Distance

Zonal lumen

Coefficients of Utilization – Zonal cavity Method

Luminaire and Accessories

Luminaire	Item Number	Item 12NC

Blast Powercore gens, eW, 3000 K, 100 – 277 VAC, Black housing Lumina ire only. Values in this specification sheet represent bot h the luminaire and spread lens combined. Soread lens available below in Associated Part.| 523-000110-40| 912400137723
Associated Parts
80° Spread lens Trim Ring required for mounting. Must be ordered separately.| 120 -000185 -11| 912400130347
Accessories
Trim Ring, Black| 120-000185-01| 912400130337
Louver, Black| 120-000185-05| 912400130341
Rock Guard, Black| 120-000185-07| 912400130343
Half Glare Shield, Black| 120-000185-14| 912400130350
Full Glare Shield, Black| 120-000185-03| 912400130339
Wiring Compartment UUcUL, Black| 106-000011-30| 910503704 147
Wiring Comoartment CE, Black| 106-000011-40| 910503703275
Architectural Mountine Arm, for use with Blast, Graze, Graze Comoact, Burst Architectural, and Vava Flood. Short, erav| 120-000206-00| 912400136642
Architectural Mounting Arm, for use with Blast, Graze, Graze Comoact, Burst Architectural, and Vava Flood. Medium, grav| 120-000206-01| 912400136643
Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Long, gray| 120-000206-02| 912400136644
Power Supplies
Data Enabler Pro (required to digitally dim unit), 3/4 in / 1/2 in NPT (U.S. trade size conduit)| 106-000004-00| 910503701210
Data Enabler Pro (required to digitally dim unit), PG21/PG13 (metric size conduit)| 106-000004-01| 910503701211

© 2022 Signify Holding. All rights reserved. Specifications are subject to change without notice.
No representation or warranty as to the accuracy or completeness of the information included
herein is given and any liability for any action in reliance thereon is disclaimed.
https://www.colorkinetics.com/global/products/essentialwhite/blast-powercore- gen5-ew