GE Profile PP9830DR Series 30 Inch Downdraft Electric Cooktop User Manual
- June 9, 2024
- GE Profile
Table of Contents
PP9830DR
GE Profile™ Series 30″ Downdraft Electric Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
WALL INSTALLATION:
Wall installations require 25″ countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting.
PENINSULA OR ISLAND INSTALLATION:
For peninsula/islands a minimum 26″ countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation.
SLAB INSTALLATION:
For peninsula or island installation and rear wall ducting, 6″ PVC duct or locally approved piping should be used if installing under a poured concrete slab.
RECEPTACLE LOCATION:
Install an approved junction box within shaded area shown in diagram. Junction box must be at least 10-1/2″ below top of cabinet.
INSTALLATION INFORMATION:
Before installing, consult installation instructions, packed with product, for
current dimensional data.
NOTE: Electrical cable is not supplied with unit.
Order part number JXCK89 from your Ge Appliances Dealer
These cooktops are approved for indoor use only.
APPROXIMATE COOKING DIMENSIONS
*Note: A 6″ minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches.
INSTALLING THE DUCTWORK:
Use galvanized or aluminum duct in 6″ round or 3-1/4″ x 10″ size, or combination of both. PVC duct or locally approved piping should be used if installing under a poured concrete slab. Local building code must be followed in specifying type and schedule of all duct used.
NOTE: Ductwork must be vented to outside. Do not vent into a wall,
ceiling, crawlspace, attic or any concealed space. Always use an appropriate
roof or wall cap with damper.
Laundry-type wall caps should never be used. For maximum efficiency use
the shortest and straightest duct run possible, with as few fittings as
possible. For satisfactory performance the duct run should not exceed 100 feet
equivalent length. Refer to the table of equivalent lengths (shown in
installation instructions) for various duct configurations.
FEATURES AND BENEFITS
Downdraft Exhaust Powerful exhaust system effectively pulls smoke and steam out of the kitchen Ceramic Glass Cooktop A smooth cooktop surface makes cleaning quick and easy Ribbon Heating Elements Provide powerful heat beneath a smooth glass surface to ensure even heat and fast warm-up times Bridge Element Combines three cooktop elements into one large cooking area, ideal for oversized cooking pans 9″/6″ Power Boil Element Accommodates various-size pots or pans and 3,000 watts of power speeds the boiling process Three Speed Downdraft Fan Powerful three speed exhaust system effectively pulls smoke and vapors out of the kitchen Frameless Design A smooth and seamless cooktop surface makes cleaning quick and easy Model PP9830DRBB Black on black
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications Visit geappliances.com for more info
Specification Revised 8/22
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE
Appliances product questions, visit our website at
geappliances.com
or call GE Answer Center® Service, 800.626.2000.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>