CANDY CTP634SC Induction Hob Instruction Manual

CTP634SC Induction Hob
Instruction Manual
CTP634SC, CTP643SC, CCTP644S, CTP644SCWIFI

Thank you for purchasing the CANDY induction hob. Please read this instruction manual carefully before using the hob and keep it in a safe place for future reference.
By placing the CE c E marking on this product, we declare, on our own responsibility, compliance to all the European safety, health and environmental requirements stated in the legislation for this product. As applicable, the parts of this appliance are compliant to REGULATION (EC) No 1935/2004 on materials and articles intended to come into contact with food.

Safety Reminding and Maintenance:

• WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
• Children under 8 Years of age must be kept away from the appliance unless they are continuously supervised.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision
• WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame e.g. with a lid or a fire blanket.
• WARNING: Danger of fire: do not store items on cooking surfaces.
• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• Do not use a steam cleaner for cleaning operations Metallic objects such as knives, forks, spoons, and saucepan lids must not be placed on the hob surface as they can get hot.
• Any spillage should be removed from the lid before opening.
• The hob surface must be allowed to cool down before closing the lid.
• After use, switch off the hob element by its control. Do not rely on the pan detector.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
• The instructions state the type of cord to be used, taking into account the temperature of the rear surface of the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
  – Always use the appropriate cookware.
  – Always place the pan in the center of the unit that you are cooking on.
  – Do not place anything on the control panel.
  – Do not use the surface as a cutting board.
  – The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
  – The instructions state the type of cord to be used, taking into account the temperature of the rear surface of the appliance.
  – The hob surface must be allowed to cool down before closing the lid.
  – CAUTION: the cooking process must be supervised. A short term cooking process has to be supervised continuously

Dear Customer: Thank you for purchasing the CANDY induction hob. We hope it will give many years of good service. Please read this instruction manual carefully before using the hob and keep it in a safe place for future reference.

Product Introduction

The induction hob caters to all kinds of cooking. with its electromagnetic cooking zones, and its micro-computerized controls and multi-functions, making it the ideal choice for today’s family. Manufactured with specially imported materials, the CANDY induction hob is extremely user-friendly, durable, and safe.

Working Principle

The induction hob comprises a coil, a hotplate made of ferromagnetic material, and a control system. The electrical current generates a powerful magnetic field through the coil. This produces a large number of vortices which in turn generate heat which is then transmitted through the cooking zone to the cooking vessel.

Safety

This hob was specially designed for domestic use. In its constant search to improve its products. CANDY reserves the right to modify any technical. program or aesthetic aspects of the appliance at any time.
Protection from over-heating
A sensor monitors the temperature in the COOko-; zones. When the temperature exceeds a safe level, the cooking zone is automatically switched off.
Detection of small or non-magnetic items
When a pan with a diameter of less than 80 mm. or some other small item (e.g. knife. fork, key) or a non-magnetic pan (e.g. aluminum) has been left on the hob, a buzzer sounds for approximately one minute. after which the hob goes automatically on to standby.
Residual heat warning
When the hob has been operating for some time. there will be some residual heat. The letter ‘hi appears to warn you to keep away from it.
Auto shutdown
Another safety feature of the induction hob is auto shutdown. This occurs whenever you forget to switch off a cooking zone. The default shutdown times are shown in the table below:

When the pan is removed from the cooking zone. it stops heating immediately and switches itself off after the buzzer has sounded for one minute.
Warning: Anyone who has been fitted with a heart pacemaker should consult a doctor before using the induction hotplate.

Installation

1. Cut a hole in the worktop of the dimension shown in the diagram below. A minimum of 50 mm space should be left around the hole, The worktop should be at least 30 mm thick and made of heat-resistant material, As shown in Figure (1)
   

2. It is essential that the induction hob is well ventilated and that the air intake and exit are not blocked.
   Make sure the hob is correctly installed as shown in Figure 2.
   Figure2NB: For safety. the gap between the hob and any cupboard above it should be at least 760 mm.

3. Fix the hob to the worktop using the four brackets on the base of the hob. The position of the brackets can be adjusted according to the thickness of the top.
   

Warren:

1. The induction hob must be installed by a properly qualified person. We have our own qualified installers. Never try to install the appliance yourself.
2. The induction hob must not be installed above refrigerators, freezers, dishwashers, or tumble dryers.
3. The induction hob should be installed so that optimum radiation of heat is possible.
4. The wall and the area above the hob should be able to withstand heat.
5. To avoid any damage, the sandwich layer and adhesive should be heat-resistant.

Connection to the power supply

The socket should be connected in compliance with the relevant standard, to a single-pole circuit breaker. The method of connection is shown in Figure 3.

If the cable is damaged or needs replacing, this should be done by an after- sales technician using the proper tools, so as to avoid any accidents.
If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3 mm between the contacts. The installer must ensure that the correct electrical connection has been made and that it complies with safety regulations. The cable must not be bent or compressed. The cable must be checked regularly and only replaced by a properly qualified person.

Diagram of induction hob:

Schematic diagram of the control panel

1. Heating zone selection controls
2. Power / Timer regulating key
3. Keylock/Pause control
4. ON/OFF control
5. Timer control
6. flexible Area control
7. WIFI control

Instructions for Use

Start cooking

• Touch the ON/OFF control for three seconds. After power on, the buzzer beeps once, all displays show ‘-” or -‘, indicating that the induction hob has entered the state of standby mode.

• Place a suitable pan on the cooking zone that you wish to use.

• Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
  

• Touching the heating zone selection control, and an indicator next to the key will flash

Select a heat setting by touching the slider control

• If you don’t choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1.
• YOU can modify the heat setting at any time during cooking.

If the display flashes LI alternately with the heat setting
This means that:

• you have not placed a pan in the correct cooking zone or
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable plan in the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
Finish cooking
Touching the heating zone selection control that you wish to switch off.
Turn the cooking zone off by touching the slider to’ “. Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy-saving function if you want to heat further pans, use the hotplate that is still hot.
Timer control
You can use the timer in two different ways

• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
• You can set it to turn one or more cooking zones off after the set time is up. The timer of maximum is 99min.

a) Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not selecting any cooking zone.
Touch timer control, the “10′ will show in the timer display, and the ‘0’ flashes.
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the “1” will flash
Set the time by touching the slider control (e.g.9), now the timer you set is 95 minutes.
when the time is set, it will begin to count down immediately. The display will show the remaining time
The buzzer will beep for 30 seconds and the timer
indicator shows – when the setting time is finished.
b) Setting the timer to turn one or more cooking zones off
Set one zone Touching the heating zone selection control that you want to set the timer for.

Touch timer control, the “10” will show in the timer display, and the “0” flashes.
Set the time by touching the slider control. (e.g. 5)

Touch the timer control again, the “1” will flash.
Set the time by touching the slider control (e.g.9), now the timer you set is 95 minutes.
when the time is set, it will begin to count down immediately. The display will show the remaining time.
NOTE: The red dot next to the power level indicator will illuminate indicating that the zone is selected.
when the cooking timer expires, the corresponding cooking zone will be switched off automatically.
Ls another cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the steps of setting one zone; when you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes. The shown as below:
Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new min. timer and the dot of the corresponding zone will flash. The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
c) Cancel the timer
Touching the heating zone selection control that you want to cancel the timer.
Touching the timer control, the indicator flash.
Touch the slider control to set the timer to “00”, and the timer is canceled.
Locking the Controls

• you can lock the controls to prevent unintended use (for example children accidentally turn the cooking zones on).
• when the controls are locked, all the controls except the ON/OFF control are disabled.

To lock the controls

Touch and hold the lock control for a while.| The timer indicator will show ” Lo “
To unlock the controls
Touch and hold the lock control for a while.

** when the hob is in the lock mode, all the controls are disabled except the ON/OFF , you can always turn the induction hob off with the ON/OFF control in an emergency, but you shall unlock the hob first in the next operation.
Pause Mode**

•  You can pause the heating instead of shutting the hob off.
• when entering the Pause mode, all the controls except the ON/OFF control are disabled.

| To enter the pause mode
---|---
Touch the lock/pause control.| | All the indicators will show ” i i”
| To exit pause mode
| Touch the lock/pause control.

** when the hob Is in the pause mode, all the controls are disabled except the ON/OFF 0, you can always turn the induction hob off with the ON/OFF control in an emergency. The hob will shut down after 10min if you I can’t exit the pause mode.
Double zones (Only model CTP634SC)
In this zone can be used cookware with a diameter between 160mm and 290mm in order to have more flexibility on the zone.”
FLEXIBLE AREA**

• This area can be used as a single zone or as two different zones. accordingly to the cooking needs anytime.
• The free area is made of two independent inductors that can be controlled separately. As big zone

1. To activate the free area as a single big zone, Touch the Flexible Area control.
   

2. As a big zone, we suggest the used as the following: Cookware: 250mm or 280mm diameter cookware (Square or Oval cookware are acceptable)
   

we don’t recommend other operations except for above mentioned three operations because it might affect the heating of the appliance
As two independent zones
To use the flexible area as two different zones, you can have two choices of heating.
(a) Put a pan on the right upside or the right downside of the flexible zone.

(b)Put two pans on both sides of the flexible zone.

Notice: Make sure the pan is bigger than 12cm.
WI-FI function( ONLY FOR CTP644SCWIFI)
First of all, you should download Simply-Fy and install it on your portable device. Then enroll your induction hob.

Refer to the annex for details. To use the WIFI function, switch the hob on and press the WIFI key. The wifi LED flashes fast for 5 seconds which means the WIFI module is booting. If the WIFI module connects to the router, the win LED will remain on all the time. Otherwise, the WIFE LED will be flashing in cycles of 1 second on I second off. If connected correctly, you can find much hob the information from simply-Fy, e.g. Zone power, remaining heat time.
Boost mode
Activate the boost function
Touching the heating zone selection control Cancel the Boost mode
Touching the heating zone selection control that you wish to cancel the boost function
Touching the slider to b. Make sure the display shows

Select a heat setting by touching the slider control.

• The function can work in any cooking zone.
• The cooking zone returns to its original setting after 5 minutes.
• If the original heat setting equals 0. it will return to 9 after 5 minutes.

Note: It is recommended that the cooker hood suction is switched on a few minutes prior to cooking and switched off a few minutes after terminating cooking.
Pause Mode

• You can pause the heating instead of shutting the hob off.
• When entering the Pause mode. all the controls except the ON/OFF control are disabled.

To enter the pause mode

Touch the lock/pause control.| All the indicators will show” Ii”
To unlock the controls
Touch the lock/pause control.

**** when the hob is in the pause mode, all the controls are disabled except the ON/OFF Oj, you can always tum the induction hob off with the ON/OFF 0 control in an emergency.

Power Management Function

• it is possible to set a maximum power absorption level for the induction hob. choosing up to different power ranges.
• induction hobs are able to limit themselves automatically in order to work at a lower power level, to avoid the risk of overloading.

To enter Power Management Function
Turn on the hob, then Press at the same time Timer control and key lock.
The timer indicator will show ” which means  – power level S. The default mode is on 7.0Kw.
To switch to another level
Select a power level by touching the slider control. There are S power levels, from “P1” to “pS”. The timer indicator will show one of them. :
the maximum power is 2 5Kw.
-PT : the maximum power is 3.5Kw.
-Pr the maximum power is 4.5Kw. ‘
PC: the maximum power is 5.5Kw.
-P5′ the maximum power is 7.0Kw.
Confirmation and Exit Power Management Function
Press at the same time the Timer control and key lock for confirmation. Then the hob will be turned off.

Selection of cooking vessels

You may have a number of different cooking vessels

1. This induction hob can identify a variety of cooking vessels, which you can test by one of the following methods: Place the vessel in the cooking zone. If the corresponding cooking zone displays a power level, then the vessel is suitable. If “U” flashes, then the vessel is not suitable for use with the induction hob.

2. Hold a magnet to the vessel. If the magnet is attracted to the vessel, it is suitable for use with the induction hob.
   NB: The base of the vessel must contain magnetic material. It must have a flat bottom with a diameter of more than 14 cm.

3. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot slightly wider energy will be used at its maximum efficiency. If you use smaller pot efficiency could be less than expected. Pot less than 140 mm could be undetected by the hob.

Cleanness and Maintenance

The surface of the induction hob may be easily cleaned in the following way:

ceramic glass

NB: Disconnect the power supply before cleaning.

Failure Display and Inspection

If any abnormality occurs. the induction hob will automatically go into protective mode and display one of the following codes:

Power on after power supply returns to normal.
E3/E4| Abnormal temperature| Check the pan
E5/E6| Poor heat radiation in the cooking zone| Restart when the cooking zone cools down

The above table shows how to assess and check common faults. Do not dismantle the appliance yourself, otherwise, you may damage the induction hob.

Customer Care Service

If a fault should occur, before calling After Sales Service, please do the following: -Check that the appliance is correctly plugged in -Read the failure and display the table above If you are still unable to resolve the problem, switch off the appliance, do not try to dismantle it, and call After Sales Service.

Special Declaration

The contents of this manual have been carefully checked. However, the company cannot be held responsible for any misprints or omissions. Also, any technical modifications may be included in a revised version of the manual without notice. The appearance and color of the appliance in this manual may differ from the actual one.
This appliance is labeled in compliance with European directive 2012/19/EC for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly. you will help prevent any possible damage to the environment and to human health. which might otherwise be caused if it were disposed of in the wrong way. The symbol on the product indicates that it may not be treated as normal household waste. It should be taken to a collection point for the recycling of electrical and electronic goods. This appliance requires specialist waste disposal. For further information regarding the treatment. recovery and recycling of this product please contact your local council. your household waste disposal service, or the shop where you purchased it.
DISPOSAL:
Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment Is necessary. For more detailed information about the treatment, recovery, and recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

References

• Elettrodomestici Smart Candy Italia: prodotti per casa e cucina | Candy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>