Trulyway J56 True Wireless Earbuds User Guide
- June 4, 2024
- Trulyway
Table of Contents
Trulyway J56 True Wireless Earbuds
GETTING STARTED
- Open t he charging case to power on and activate pairing mode.
- Go to t he Bluetooth® settings on your device and select Urbanista Austin from the list.
- The LED will stop flashing as the connection is established.
Activate Voice Assistant by left side long-press.
FULL MANUAL ONLINE
Full manual available at urbanista.com/manuals
TOUCH CONTROLS
CHARGING CASE
IMPORTANT SAFETY INSTRUCTIONS
Read all th& Instructions before using tha product
-
To avoid accidental ingestion. keep the earbuds away from small children and pets. The earbuds contain a lithiumion battery and may be hazardous if swallowed. If ingested. seek immediate medical attention.
-
Do NOT use the earbuds at a high volume for any extended period.
-
To avoid hearing damage. use your earbuds at a comfortable. moderate volume level. Turn the volume down on your device before placing the earbuds in/on your ears. then turn the volume up gradually until you reach a comfortable listening level. Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones. especially for extended periods.
-
Do not use these headphones when operating a motor vehicle. a bicycle. machinery or where your inability to hear outside sounds may present a danger to you or to others.
-
Using these headphones limits your ability to hear noises
around you. regardless of listening volume. Please be cautious when using these headphones. -
Use caution and follow applicable laws regarding mobile phone and headphone use if using the earbuds for phone calls while driving. Some jurisdictions impose specific limitations. such as single earpiece configuration. on the use of such products while driving.
-
Do not drop. sit on. insert or allow the earphones to be immersed in water.
-
Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
-
Do not use the charging case in excess of its output rating.
-
Use this product only with an agency approved power supply which meets local regulatory requirements (e.g .. UL. CSA. VDE. CCC).
-
Do not use a charging case that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire. explosion or risk of injury to persons. -
Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury to persons.
-
Do not open. crush. or expose a charging case to fire. or excessive temperature. Exposure to fire or temperature above 212°F. 100°C may cause explosion
-
Have servicing performed by a qualified repair person using only identical replacement parts.
-
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
-
Do NOT make unauthorized alterations to this product.
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a C lass B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates. uses. and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by Urbanista AB could void the user’s authority to operate this equipment.
Changes or modifications not expressly approved by the party responsible for -compliance could void the user’s authority to operate the equipment.
ICED CANADA
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the followingt two conditions: (1) this device may not
cause interference. and (2) this device must accept any interference.
including interference that may cause undesired operation of the device.
CAN ICES-3(8) /NMB-3(8)
Bluetooth® frequency band of operation 2400-2483.5 MHz/ 10mW
- Bluetooth: Maximum transmit power less than 13 dBm EIRP.
- Bluetooth Low Energy: Maximum transmit power less than 10 dBm EIRP.
EU/UK Compliance
Urbanista AB hereby declares that this wireless device is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. A copy of the Declaration of Conformity is available at www.urbanista.com/compliance.
EU Importer: Strax GmbH. BeHgische Allee 52 – 54. 53842 Troisdorf
Battery Information
Your device has an internal. non- removable, rechargeable battery. Do not
attempt to remove the battery, as you may damage the device. The battery can
be charged and discharged hundreds of times. but it will eventually wear out.
Charging time can vary depending on device capability.
Battery safety
If left unused. a fully charged battery will lose its charge over time. Always
keep the battery between -10°C and 40°C (14°F and 104°F) for optimal
performance. Extreme temperatures reduce the capacity and lifetime of the
battery. A device may temporarily stop working if its battery is too hot or
too cold. Do not dispose of batteries in a fire as they may explode. Obey
local regulations.
Recycle when possible. Do not dispose of as household waste. Use the battery
for its intended purpose only.
Improper use of. or use of unapproved or incompatible. batteries may present a
risk of fire explosion. or other hazards. and may invalidate any approval or
warranty. If you believe the battery is damaged. take it to a service center
or your local shop before continuing to use it.
Never use a damaged battery. Do not charge your device during a lightning
storm.
DON’T attempt to remove the rechargeable lithiumion battery from this product. Contact your local Urbanista retailer or other qualified professional for removal. Please dispose of used batteries properly. following local regulations.
Disposal and Recycling Information
The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life. take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
- Product Name: Urbanista Austin True Wireless Earphones
- Brand Name: Urbanista
- Model No.: Urbanista Austin
- Manufacturer: Urbanista AB. Master Samuelsgatan 10. 111 44 Stockholm. Sweden
- Input: 5V ⎓ 0.5A. Output 5V ⎓ 40rnA
- Battery capacity: 3.7V. 250 mAh. 0.925 Wh.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Urbanista AB fis under license.
© All rights reserved. Urbanista and the Urbanista mark are trademarks of Urbanista AB.
Registered trade name: Urbanista AB Address: Master Samuelsgatan 10, 111 44 Stockholm, Sweden
**WARRANTY
**
Limited one (1) year warranty. Full terms including detailed information on obtaining service are available at www.urbanista.com/warranty.