Ruijie Reyee RG-EW1200 Dual-Band Wireless Router Installation Guide

Ruijie Reyee RG-EW1200 Dual-Band Wireless Router

Product Information

The product consists of a main router and a secondary router. It has a total of 43 steps for configuration and setup.

Product Usage Instructions

1. Start by connecting the main router to your internet source using an Ethernet cable.
2. Connect the secondary router to the main router using another Ethernet cable.
3. Make sure both routers are powered on and have a stable internet connection.
4. Follow steps 6 to 43 in sequential order to configure the routers.
5. If step 13 is mentioned, please ensure you follow the instructions provided.
6. Once the configuration is complete, check if the message “Configuration erfolgreich” (Configuration successful) is displayed on the screen.

Note: The above instructions are a summary. Please refer to the complete user manual for detailed step-by-step instructions.

Appearance

Packing List

• Router *1
• Power Adapter *1
• Quick Installation Guide *1

Quick Installation

Access the Internet in Only 3 Steps

1. Insert the cable which connects to the Internet to the yellow port, and power on the router.
2. Access the Internet
   Connect to the SSID “@Ruijie-sxxxx” or “@Ruijie-mxxxx” (xxxx is the last 4 digits of MAC address) by mobile phone or PC. The configuration page will be displayed automatically, or you can visit 192.168.110.1 by browser
   *If you can not connect to the SSID or visit the website, please scan the QR code on the back of package for on line support.
3. Configuration Completes
   Complete all configurations according to the guide. When”Configuration succeeded” is displayed, you can access the Internet.

Reyee Mesh router can connect with each other to form a distributed network.

1. Connect the main router to the Internet
   Please refer to the Quick Installation for configuration. This router is used as the main router of the distributed network, and other Reyee Mesh routers are secondary routers.

2. One-click connection
   Please make sure that the routers to be paired are in the factory settings. If they are configured before, restore the factory settings first (see the FAQ for how to restore the factory settings). Do not connect the network cable to the routers.
   Power on the routers within 2 meters of the main router, and their indicators will start to blink quickly. Wait for a period of time, the system indicators will turn to steady on, which means the routers are on. Press the Pairing button on the main router, and its WiFi indicator will start to blink. The main router will search for neighboring secondary routers for 2 minutes. After the search is over, the WiFi indicator changes to steady on. When the WiFi indicators on the secondary routers blink, it means that two routers are being paired; when the WiFi indicator changes to steady on, the pairing completes.

3. Move the paired Reyee Mesh routers to the positions where the signal needs to be expanded, and power them on. No more configuration is required. After the router is powered on, the WiFi indicator blinks, which means it is connecting to the main router. When the WiFi indicator turns to steady on, the connection is successful, and a distributed WiFi network can be constructed.

Ensure the router can access the Internet
After pressing the button, the WiFi indicator starts blinking As the detection ends after 2 minutes, it will stop blinking.

Indicator Instruction

stops
Port Indicator| Off| The port is not connected or the cable disconnects
Steady On| The port is connected normally

FAQ

• Why can’t I visit 192.168.110.1?

1. Check whether NIC is configured as DHCP.
2. Ensure the computer is connected to any of the LAN ports and the indicator is on; otherwise you may change the cable and have a try again.
3. Re-open the browser (recommend to use Google Chrome) and visit 192.168.110.1 again.
4. Change the browser.
5. Change the cable or computer.  

If all these methods fail, please restore the factory settings (hold the Reset Button for 1 Os).

• Why can’t I access the Internet after configuration?

1. Check whether the cable is connected as the instruction, and the indicator is on.
2. Check the Internet connection type.
  *  **a.** If your ISP offers an account/password, please select PPPoE and enter your account/password.
  *  **b.** If your ISP offers the static IP address, subnet mask, gateway and DNS, please select Static IP and enter the information.
3. If you still can not access the Internet, please contact your ISP.  

Note: This equipment is restricted to indoor operation in 5.15-5.35GHz for Hong Kong.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>