ATRIX TNS-1756 Charging Dock User Manual
- June 9, 2024
- ATRIX
Table of Contents
ATRIX TNS-1756 Charging Dock
Product Introduction
This charging station is designed for Switch Joy-<:en and Pro controller. It’s easy to charge four Switch Joy-Cons or two Switch Joy-Cons end one Pl”O controller or two Pro controllers at the same time. The intelligent micro control technology is used to manage circuit output. The rated input voltage is 4.75-5.25VDC, and the input voltage range 4.5-5.5VDC can wcrk properly
Product Illustration
Product Features
- The intelligent micro control technology is used to manage circuit output
- Charging folX Switch Joy-Cons or two Switch Joy-Cons and one Pro controller or two Pro controllers at the same time
- Two kinds of charging and discharging indicator light is easy to understand.
- With a power switch, easy to tum off the charge.
- Beautiful appearance, easy to use.
- Standby power consumption is small, saving electricity and environmental protection
Charging Instructions
- Use the Switch original AC Adapter or standard Type-C power charger.
- Connect the charging power, the charging indicator shows green light.
- When charging the Switch Joy-Con or Pro controller, the charging indicator light displays red; and the charging indicator turns green after fully charged
Product Specification
Working Environment Condition
Electrical Characteristics
NOTE
- Unplug the power adapter plug when it is full of electricity or does not use it
- Can’t be used and stored in a moist environment
- In use or storage, as far as possible to avoid dust, heavy dust, heavy pressure, so as not to affect the service life.
- If improper use, or resulting in flooding, crashing or breaking and electrical performance problems, please do not use.
- Do not use microwave oven and other external heating equipment to dry it.
- Please stop using if the product damaged and send to the maintenance shop for repair:. Do not disassemble it yourself.
Y.<!: Don’t play with this product for children
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Company Name: GameStop
Address:Geeknet, Inc. 625 Westport Pkwy, Grapevine, TX 76051
http://www.gamestop.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>