Fanvil IP Scan Tool Instructions
- June 9, 2024
- Fanvil
Table of Contents
Fanvil IP Scan Tool
Revise History
Revise History:
| Version | Author | Release Time | Description |
|---|---|---|---|
| 1.0 | 2020.9.4 | Initial Version |
Introduction
Overview
Products without screens are not very convenient to deploy and use. Fanvil IP scanningtool is convenient to obtain device information and modify network parameters. This document mainly introduces the use of IP scanning tools.
Applicable Model
This document applies to Fanvil i12, i16V, i18S, i20S, i23S, i30, i31S, i32V, i33V/i33VF, PA2,etc.
Target Audience
This document is for people using IP scanning tools.
Instructions for use
Scan
Open the scan tool and click the scan button on the right to scan the azimuth
devices inthe local area network.
Change Parameter
IP scanning tool supports modifying device IP address and device description information
- Select the device to be modified
- Click the Modify Parameters button on the right
- You can see the information as shown in the figure below. If the device uses DHCP, DHCP is checked, and the IP address cannot be modified at this time; when the DHCPcheck is removed, the device network can be modified to a static IP. Support modifyingIP address, subnet mask, gateway; after setting the information to be modified, you needto enter the user name and password of the device (administrator user name and password)
- After the modification is completed, click Submit, wait for the prompt to modify the
parameters successfully, and you can see the setting information in the scan list.
Set Language
The IP scanning tool supports setting the language, you can choose Chineseor English, as shown in the following figure.
It takes effect immediately after setting.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>