Paradigm DCS-208IW3 In-Wall Subwoofer Installation Guide
- June 9, 2024
- Paradigm
Table of Contents
Paradigm DCS-208IW3 In-Wall Subwoofer Installation Guide
PARTS INCLUDED
-
* * 1 – Backbox- 2 – Pre-Construction Brackets
- 1 – Wire Loop with Screw
REQUIRED, NOT INCLUDED
-
* * 16 – #8 Wood Screws(8 to attach brackets to box; 8 to attach box to wall)
NOTE: DO NOT PUNCTURE OR REMOVE PROTECTIVE PLASTIC OVER CUTOUT UNTIL READY TO INSTALL SUBWOOFER.
PARADIGM DOES NOT SUPPLY SCREWS FOR MOUNTING BACKBOX AND SUBWOOFER TO WALL.
CHOOSE SCREWS APPROPRIATE FOR WALL COMPOSITION AND WEIGHT OF BACKBOX WITH
SUBWOOFER.
- BX-208 BACKBOX: 17.6 lb / 8 kg
- DCS-208IW3 SUBWOOFER: 14 lb / 6.3 kg
- TOTAL WEIGHT: 31.6 lb / 14.3 kg
IF YOU ARE NOT COMFORTABLE PERFORMING THE FOLLOWING PROCEDURE, CONTACT A PROFESSIONAL INSTALLER
IMPORTANT NOTE: The required amount of damping material is included and correctly positioned in backbox. DO NOT remove, compact or add additional damping material. DO NOT add damping material to wall directly behind backbox.
Installation Instruction
-
BACKBOX DIMENSIONS
NOTE : Wire loop must be attached with screw provided. -
INSTALLING BRACKETS
CAUTION: Mounting brackets are made of galvanized steel. Edges may be sharp
-
INSTALLING BACKBOX
To prevent vibrations and resonances from coloring output, center the box between joists—backbox must not touch joists.
WIRING
DRYWALLING
INSTALLING SUBWOOFER
- Holding the subwoofer’s front lip with your thumbs and index fingers, push the 4 mounting screws toward each other with your other fingers, so the mounting brackets can fit through the hole with an “up-and-in” motion.
Release the screws and gently push the subwoofer into the backbox.
INSTALLING GRILLE
Documents / Resources
|
Paradigm DCS-208IW3 In-Wall
Subwoofer
[pdf] Installation Guide
DCS-208IW3 In-Wall Subwoofer, DCS-208IW3, In-Wall Subwoofer, Subwoofer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>