CYP PUV-3090TX-UEA UHD+ HDMI Over HDBaseT3 Receiver User Manual

CYP PUV-3090TX-UEA UHD+ HDMI Over HDBaseT3 Receiver

DISCLAIMERS
The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document. CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd. All Rights Reserved. Version 1.1

TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to avoid wasting electricity.

VERSION HISTORY

INTRODUCTION

This 4K UHD+ HDMI over HDBaseT transmitter and receiver pair uses HDBaseT 3.0, the newest generation of HDBaseT technology, and is the perfect solution for extending full bandwidth (18Gbps) HDMI 2.0, 4K@60Hz (4:4:4, 8-bit) video with HD audio via a single run of Cat.6A/7 cable over distances of up to 100 meters. Multiple control and data signals may also be transmitted along with the audio and video, including bi-directional IR, RS-232, USB 2.0, and Gigabit Ethernet. When the transmitter and receiver are used together, 2 micro USB host connections are available (1 on the transmitter, 1 on the receiver) for connecting a single USB host (such as a laptop or PC) to devices on up to 4 USB 2.0 (Type-A) ports (2 on the transmitter, 2 on the receiver) forming a highly flexible KVM extension configuration. This transmitter and receiver pair is ideal for use in any video extension scenario, but they excel when latency-free, uncompressed, high resolution video is critical, such as medical installations, live conferences, and education.

APPLICATIONS

• Household entertainment sharing and control
• Lecture hall/classroom display and control
• Meeting room presentation and control

PACKAGE CONTENTS

Single Unit (Transmitter or Receiver)

• 1× UHD+ HDMI over HDBaseT Transmitter or Receiver with USB KVM
• 1× 24V/2.7A DC Power Adapter (Transmitter only)
• 2× 3-pin Terminal Block
• 1× 8-pin Terminal Block
• 1× Operation Manual

Dual Unit Set

• 1× UHD+ HDMI over HDBaseT Transmitter with USB KVM
• 1× UHD+ HDMI over HDBaseT Receiver with USB KVM
• 1× 24V/2.7A DC Power Adapter
• 4× 3-pin Terminal Block
• 2× 8-pin Terminal Block
• 1× Operation Manual

SYSTEM REQUIREMENTS

• HDMI source equipment such a media player, video game console, or set-top box.
• HDMI receiving equipment such as an HDTV, monitor, or audio amplifier.
• The use of Premium High Speed HDMI cables, and industry standard Cat.6A or Cat.7 Ethernet cable is highly recommended.

FEATURES

• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)
• 1 HDMI input, 1 HDMI output, and 1 HDBaseT output (Transmitter)
• 1 HDMI input, 1 HDMI output, and 1 HDBaseT input (Receiver)
• Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and output over both HDMI and HDBaseT
• Supports Deep Colour input and output up to 12-bit
• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output Supports CEC bypass
• HDBaseT extends video, audio and data over a single Cat.6A/7 cable and can reach distances up to 100m/328ft
• HDBaseT feature support: HD Video and Audio, Gigabit Ethernet, PoH (Tx to Rx), Bi-directional audio (analogue), and Control (bi-directional USB/IR/RS-232 pass-through)
• 2 USB 2.0 Type-A device ports and 1 Micro USB host port
• Selectable HDMI audio extraction/analogue audio bypass functionality Note: HDMI audio extraction is only available with LPCM 2.0 sources. HDMI output functions as a local monitor (Transmitter only) Transmitter can supply PoH to the connected receiver
• Receiver is powered directly via PoH from the connected transmitter Note: A compatible PSE transmitter providing PoH is required to power this receiver. Transmitters from other brands may not be compatible.

OPERATION CONTROLS AND FUNCTIONS

Front Panel (Transmitter)

1. LAN Port : Connect to Ethernet supporting devices or to your local
   network, as appropriate, to extend the network to both ends of the HDBaseT connection.

2. AUDIO IN 3-pin Terminal Block : Connect to the analogue audio output of a device such as a media player or game console using a -pin adapter cable. Audio is sent to the analogue audio output on the connected compatible receiver.

3. AUDIO OUT 3-pin Terminal Block : Connect to powered speakers or an amplifier for analogue audio output using a 3-pin adapter cable. Audio is sourced from the analogue audio input on the connected compatible receiver.

4. RS-232 4-pin Terminal Block : Connect to a PC, laptop, or serial controllable device with a 4-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.

5. IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.

6. USB 2.0 Ports (Type-A): Connect directly to a standard USB device such as a mouse, keyboard, or flash drive to extend their USB functionality to the currently active Micro-USB host port.

7. AUDIO Button: Press this button to toggle the transmitter’s analogue audio stream source between the analogue audio input (bypass) and the HDMI input’s audio (extract).
   Note : HDMI audio extraction is only available with LPCM 2.0 sources. Pressing this button will also change the setting on the receiver.

8. BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the unit is in audio bypass or extract mode.

9. POWER LED : This LED will illuminate to indicate the unit is on and receiving power.

10. LINK LED : This LED will illuminate solidly when a live connection with a compatible receiver is active.

Rear Panel (Transmitter)

1. DC 24V Port : Plug the 24V DC power adapter into this port and connect it to an AC wall outlet for power.

2. USB 2.0 Port (Micro-B) : Connect directly to a standard USB host such as a PC or laptop to extend their USB functionality to all currently connected USB devices on both ends of the HDBaseT connection.
   Note : If USB hosts are connected to both the transmitter and receiver at the same time, only the most recently connected host will be active.

3. CAT6A/7 OUT Port: Connect to a compatible HDBaseT receiver with a single Cat.6A/7 cable for extension of all data signals. PoH will also be supplied to a connected compatible PD receiver.
   Note : The PoH function is designed for powering compatible receiver units only. Non-PoH receivers will need their own power supply. Receivers from other brands may not be compatible.

4. HDMI IN Port : Connect to HDMI source equipment such as a media player, game console, or set-top box.

5. HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

Front Panel (Receiver)

1. LAN Port : Connect to Ethernet supporting devices or to your local network, as appropriate, to extend the network to both ends of the HDBaseT connection.

2. AUDIO IN 3-pin Terminal Block: Connect to the analogue audio output of a device such as a media player or game console using a 3-pin adapter cable. Audio is sent to the analogue audio output on the connected compatible receiver.

3. AUDIO OUT 3-pin Terminal Block: Connect to powered speakers or an amplifier for analogue audio output using a 3-pin adapter cable. Audio is sourced from the analogue audio input on the connected compatible receiver.

4. RS-232 4-pin Terminal Block: Connect to a PC, laptop, or serial controllable device with a 4-pin adapter cable for the extension of RS-232 signals between both ends of the HDBaseT connection.

5. IR 4-pin Terminal Block (In/Out): Connect to both an IR Blaster and Extender using a 4-pin Y-adapter cable to transmit and receive IR control signals and extend them to devices connected to the other end of the HDBaseT connection.

6. USB 2.0 Ports (Type-A): Connect directly to a standard USB device such as a mouse, keyboard, or flash drive to extend their USB functionality to the currently active Micro-USB host port.

7. AUDIO Button: Press this button to toggle the transmitter’s analogue audio stream source between the analogue audio input (bypass) and the HDMI input’s audio (extract).
   Note : HDMI audio extraction is only available with LPCM 2.0 sources. Pressing this button will also change the setting on the transmitter.

8. BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the unit is in audio bypass or extract mode.

9. POWER LED : This LED will illuminate to indicate the unit is on and receiving power.

10. LINK LED : This LED will illuminate solidly when a live connection with a compatible receiver is active.

Rear Panel (Receiver)

1. USB 2.0 Port (Micro-B): Connect directly to a standard USB host such as a PC or laptop to extend their USB functionality to all currently connected USB devices on both ends of the HDBaseT connection.
   Note : If USB hosts are connected to both the transmitter and receiver at the same time, only the most recently connected host will be active.

2. CAT6A/7 IN Port : Connect to a compatible HDBaseT transmitter with a single Cat.6A/7 cable for extension of all data signals. Power via PoH will also be supplied to this unit when connected to a compatible PSE transmitter.
   Note : A compatible PoH (PSE) transmitter is REQUIRED to power this receiver.

3. HDMI IN Port: Connect to HDMI source equipment such as a media player, game console, or set-top box.
   Note : If this HDMI input is connected, its video will automatically be output over the local HDMI output, overriding any current HDBaseT video source.

4. HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for digital video and audio output.

RS-232 Pinout

IR Pinout

Audio Pinout

Stereo Audio Input

Stereo Audio Output

CONNECTION DIAGRAM

SPECIFICATIONS

Technical Specifications (Transmitter)

• HDMI Bandwidth 18Gbps
• HDBaseT Bandwidth 18Gbps
• Input Ports 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)
• Output Ports 1×HDBaseT (RJ-45) 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)
• Pass-through Ports 1×IR In/Out (4-pin Terminal Block) 1×RS-232 (4-pin Terminal Block) 2×USB 2.0 (Type-A) 1×LAN (RJ-45)
• Pass-through/Service Port 1×USB 2.0 (Micro-B)
• IR Frequency 30 ~ 50kHz (30 ~ 60kHz under ideal conditions)
• Baud Rate Up to 115200
• Power Supply 24V/2.7A DC (US/EU standards, CE/FCC/UL certified)
• ESD Protection (HBM) ±8kV (Air Discharge) ±4kV (Contact Discharge)
• Dimensions (W×H×D) 128mm×25mm×108mm [Case Only] 128mm×25mm×112.5mm [All Inclusive]
• Weight 400g
• Chassis Material Metal (Steel)
• Chassis Colour Black
• Operating Temperature 0˚C – 50˚C/32˚F – 122˚F
• Storage Temperature -20˚C – 60˚C/-4˚F – 140˚F
• Relative Humidity 20 – 90% RH (Non-condensing)
• Power Consumption 12W

Technical Specifications (Receiver)

• HDMI Bandwidth 18Gbps
• HDBaseT Bandwidth 18Gbps
• Input Ports 1×HDBaseT (RJ-45) 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)
• Output Ports 1×HDMI (Type-A) 1×Analogue Stereo (3-pin Terminal Block)
• Pass-through Ports 1×IR In/Out (4-pin Terminal Block) 1×RS-232 (4-pin Terminal Block) 2×USB 2.0 (Type-A) 1×LAN (RJ-45)c
• Pass-through/Service Port 1×USB 2.0 (Micro-B)
• IR Frequency 30 ~ 50kHz (30 ~ 60kHz under ideal conditions)
• Baud Rate Up to 115200
• Power Supply PoH (from Tx)
• ESD Protection (HBM) ±8kV (Air Discharge) ±4kV (Contact Discharge)
• Dimensions (W×H×D) 128mm×25mm×108mm [Case Only] 128mm×25mm×112.5mm [All Inclusive]
• Weight 390g
• Chassis Material Metal (Steel)
• Chassis Colour Black
• Operating Temperature 0˚C – 50˚C/32˚F – 122˚F
• Storage Temperature -20˚C – 60˚C/-4˚F – 140˚F
• Relative Humidity 20 – 90% RH (Non-condensing)
• Power Consumption 14W

Video Specifications

Supported Resolutions (Hz)

| Input| Output
---|---|---
HDMI| HDBT| HDMI| HDBT
720×400p@70/85| P| P| P| P
640×480p@60/72/75/85| P| P| P| P
720×480i@60| P| P| P| P
720×480p@60| P| P| P| P
720×576i@50| P| P| P| P
720×576p@50| P| P| P| P
800×600p@56/60/72/75/85| P| P| P| P
848×480p@60| P| P| P| P
1024×768p@60/70/75/85| P| P| P| P
1152×864p@75| P| P| P| P
1280×720p@50/60| P| P| P| P
1280×768p@60/75/85| P| P| P| P
1280×800p@60/75/85| P| P| P| P
1280×960p@60/85| P| P| P| P
1280×1024p@60/75/85| P| P| P| P
1360×768p@60| P| P| P| P
1366×768p@60| P| P| P| P
1400×1050p@60| P| P| P| P
1440×900p@60/75| P| P| P| P
1600×900p@60RB| P| P| P| P
1600×1200p@60| P| P| P| P
1680×1050p@60| P| P| P| P
1920×1080i@50/60| P| P| P| P

Supported Resolutions (Hz)

| Input| Output
---|---|---
HDMI| HDBT| HDMI| HDBT
1920×1080p@24/25/30| P| P| P| P
1920×1080p@50/60| P| P| P| P
1920×1200p@60RB| P| P| P| P
2560×1440p@60RB| P| P| P| P
2560×1600p@60RB| P| P| P| P
2048×1080p@24/25/30| P| P| P| P
2048×1080p@50/60| P| P| P| P
3840×2160p@24/25/30| P| P| P| P
3840×2160p@50/60 (4:2:0)| P| P| P| P
3840×2160p@24, HDR10| P| P| P| P
3840×2160p@50/60 (4:2:0),HDR10| ****

P

| ****

P

| ****

P

| ****

P

3840×2160p@50/60| P| P| P| P
4096×2160p@24/25/30| P| P| P| P
4096×2160p@50/60 (4:2:0)| P| P| P| P
4096×2160p@24, HDR10| P| P| P| P
4096×2160p@50/60 (4:2:0),HDR10| ****

P

| ****

P

| ****

P

| ****

P

4096×2160p@50/60| P| P| P| P

Audio Specifications

Digital Audio

HDMI & HDBaseT Input / Output

LPCM
Max Channels| 8 Channels
Sampling Rate (kHz)| 32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats| Standard & High-Definition

Analogue Audio

Analogue Input

Max Audio Level| 2Vrms
Impedance| 10kΩ
Type| Unbalanced
Analogue Output

Max Audio Level| 2Vrms
THD+N| < −80dB@0dBFS 1kHz (A-wt)
SNR| > 93dB@0dBFS
Frequency Response| < ±0.5dB@20Hz~20kHz
Crosstalk| < −71dB@10kHz
Impedance| 500Ω
Type| Unbalanced

Cable Specifications

Cable Length

| 1080p| 4K30| 4K60
---|---|---|---

8- bit

| ****

12- bit

| (4:4:4)

8- bit

| (4:4:4)

8- bit

High Speed HDMI Cable
HDMI Input| 10m| 10m| 5m| 3m
HDMI Output| 10m| 10m| 5m| 3m
Ethernet Cable
Cat.5e/6| 40m
Cat.6A/7| 100m

Bandwidth Category Examples

1080p (FHD Video)

• Up to 1080p@60Hz, 12-bit colour
• Data rates lower than 5.3Gbps or below 225MHz TMDS clock

4K30 (4K UHD Video)

• 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour
• Data rates higher than 5.3Gbps or above 225MHz TMDS clock but below 10.2Gbps

4K60 (4K UHD+ Video)

• 4K@50/60Hz (4:4:4, 8-bit)
• 4K@50/60Hz (4:2:0, 10-bit HDR)
• Data rates higher than 10.2Gbps

HDBaseT Features

ACRONYMS

Blanking)
XGA| Extended Graphics Array
Ω| Ohm

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue,
Shepperton, Middlesex, TW17 8BA

• Tel : +44 (0) 20 3137 9180 |
• Fax : +44 (0) 20 3137 6279
• Email: sales@cypeurope.com
• www.cypeurope.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>