HYTRONIK HBTD8200D/F Bluetooth Receiver Node Instruction Manual
- June 9, 2024
- HYTRONIK
Table of Contents
HYTRONIK HBTD8200D/F Bluetooth Receiver Node
Technical Specifications
- Product type DALI Digitial Receiver Node (Flush mount)
- Mains voltage 220~240VAC 50/60Hz
- Rated power Max.100mA, 50 devices
- Stand by power <0.5W
- Operation frequency 2.4 GHz – 2.483 GHz
- Transmission power 4 dBm
- Range (Typical) Protocol 10 ~ 30m
- Operation temperature Ta: -20°C ~ +45°C
- Storage temperature -20°C ~ +60°C
- Case temperature (Max.) Tc: +75°C
- Max. relative humidity 20 ~ 90%
- IP rating IP20
- Impulse withstand voltage 2.5KV
- Duty type S1
- Insulation material PTI material group IIIa
- Glow wire level 3, 850°C
- IP rating IP20
- Insulation Class II
- EMC standard (EMC) EN55015, EN61547, EN61000-3-2, EN61000-3-3
- Safety standard (LVD) IEC 61058-1, EN 61058-1, IEC 61058-1-2 EN 61058-1-2, AS/NZS 61058.1
- Radio Equipment (RED) EN300 328, EN301489-1, EN301489-17, EN62479
Download the App
Free App for set-up and commissioning
Smartphone app for both iOS & Android platform
Koolmesh Pro app for iPad
Web app/platform: www.iot.koolmesh.com
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
|---|
Push switch
| Short press (<1 second)
- Short press has to be longer than 0.1s, or it will be invalid.
|
- Turn on/off – Recall a scene
- Turn on only – Exit manual mode
- Turn off only – Do nothing
Double push
|
- Turn on only – Exit manual mode
- Turn off only – Do nothing
- Recall a scene
Long press (≥1 second)
|
- Dimming
- Colour tuning
- Do nothing
Simulate sensor| /|
- Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Installation
Warnings:
- Installation must be carried out by a qualified engineer in accordance with localregulations.
- Disconnect power supply before installing.
- Ensure environmental conditions are suitable for electronic equipment.
Wire Preparation
- 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
- 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)
Wiring Diagram
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download knowledge Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetoothtechnology ->Bluetooth Sensor ->Receiver Nodes
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>