ET2 Contemporary Lighting E11023 Diaphane LED 3-Light Pendant Instruction Manual

ET2 Contemporary Lighting E11023 Diaphane LED 3-Light Pendant Instruction Manual

Introduction

Please consult a qualified electrician for hanging fixture and wiring.
Light Source: LED Integrated 3x 5W

Before Getting Started

• Read the instructions carefully prior to assembling the product.

• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.

• Carefully remove all packaging materials and retain for future use.

• Keep all hardware parts and packaging out of reach of small children.

• Choose a clean, level, spacious assembly area.
  Avoid hard surfaces that may damage the product.

• Ensure that you have all required contents for complete assembly.

• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.

• Do not over tighten the screws and bolts as this may damage the threads.

• Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• CAUTION: Xenon bulbs get very hot and may burn you. Always make sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before you getting, started ensure the package contains the following components:

A.| Lighting Fixture
| X1
---|---|---
B.| Mounting Bracket
| X1
C.| *#8-32L25SCREW
| X2
D.| WIRE NUTS
| X3
E.| SCREW CAP
| X2
F.| CRYSTAL**
| X3
G.| Anchor Bolts: L4/M5
| X4

Dimension

Wiring

This fixture must be installed with compatible dimmer types only.
Improper wiring of fixture and/or use of incorrect dimmers will cause catastrophic failure and void the warranty.

SCHEMATIC FOR GENERAL REFERENCE ONLY
If fixture does not light, reverse polarity.

FOR OPTIMAL USE
Traic For example: Lutron DVCL-150P/DVCL-153P

DO NOT USE
0-10V or magnetic dimmer

IMPORTANT
Make sure that your dimmable LED fixture is paired with the correct dimmer type

Must be installed by a licensed electrician with knowledge of electronic lighting systems.

Documents / Resources

| ET2 Contemporary Lighting E11023 Diaphane LED 3-Light Pendant [pdf] Instruction Manual
E11023 Diaphane LED 3-Light Pendant, E11023, Diaphane LED 3-Light Pendant, LED 3-Light Pendant, 3-Light Pendant, Pendant
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>