LOVCUBE L08F Digital Photo Frame User Guide

LOVCUBE L08F Digital Photo Frame

Package Contents

• 1pc. Digital Photo Frame L08F
• 1pc. User Manual
• 1pc. AC Adaptor
• 1pc. Remote Control with Battery

Product Introduction

Front of Frame

A: Infrared Sensor
Receives signals from the remote control.

Please Note: Blocking the infrared sensor will cause those functions to fail.

Back of Frame

B: Power Button
Turns Digital Frame on or puts it into standby.
C: 4-way Navigation Pad and Play/Pause Button
Lets you navigate the menu and select functions.
D: Menu Button
Lets you go back a step.
E: SD/SDHC Card Slot
Connect and view photos and videos from the memory card.
F: Headphone/Speaker Port
Connect your headphones or speakers.
G: USB Port
Insert a USB storage drive to view photos and videos.
H: Power Adaptor DC-IN (5V)
Plug in power cable for power.
I: Loudspeaker
Built-in loudspeaker for musics and videos.

Please Note: The USB Port functions only for reading USB drives. It will not work for charging or other functions.

Remote Control

Please Note: Remove the battery stopper before using. Maximum working distance is six meters.

• L: ON/OFF Button – Turns the frame on or puts it into standby
• M: Home – Go back to home menu
• N: or Move cursor left/right Up/Down volume when playing videos, musics
• O: or Move cursor up/down. Quick press to skip to previous or next video. Long press for Fast – forward and rewind
• P: Slideshow -Starts slideshow
• Q: Video – Starts playing videos
• R: Sub-menu – Enter sub-menu
• S: Back – Return to the previous menu
• T: Play – Select/Play/Pause

About Button

Press this button, you can enter the quick setting submenu. You can see below menu when pressing it at slideshow mode.

You can see below menu when you pressing it at browser so that you can Copy or Delete the file there.

Inserting Battery

1. Push catch toward slot.
2. With the catch pushed, pull the battery compartment at the same time.
3. Use the Lithium cell, CR-2025 type. (Remove protection film for first time use)

Please Note: Batteries must not be disposed of in the household trash. Please dispose used/old batteries in approved battery waste locations.

Wall-mount your frame

You have only one way to mount your frame on the wall.
Drill a screw on the wall, leave a 10mm gap between the wall and the head of screw. Mount the frame onto the screw by wall mount hole and slide down to lock into place.

Quick User Guide

1. Set the digital frame on a flat, dry surface. Remove the protection film from the face of the display.
2. Connect the power supply to the digital frame. then plug it into the power outlet. The display will start and show the initial menu screen.
3. Insert an SD/SDHC card and/or USB storage drive (up to max.32GB, Format FAT32) carefully into the back of your digital frame, the frame will automatically access the SD card/USB drive and start a slideshow if the start mode is set to Photo in the menu. Note: the SD card inserts in contacts-up orientation.

• With the digital frame turned on, when both a USB drive and SD card are inserted, the frame switches automatically to the last inserted memory device.
• With the digital frame turned off, when both a USB drive and SD card are inserted, the frame defaults to the USB storage drive when turned on next time.
• In the home menu, press to select staring from either the USB storage drive or SD/ SDHC card, the device icon in gray is the highlighted icon.

Auto Rotation–Simply rotate the frame 90 degrees counterclockwise and your photo will automatically rotate. So you can view your portrait photos the right way. Auto rotation will works in photo slideshow mode.

Getting Start

Default Screen

Navigate the main menu using the 4-way navigation pad on the remote control or buttons on the back of the frame

• Photo – Play Photos – All photos-All JPEG photo files will play
• Music – Play music – All MP3 music files will play
• Video – Play videos – All MP4 video files will play
• Clock – Display a clock (You can set the type of clock display in the setting menu)
• Calendar – Display a calendar
• Browser – Search for photos, musics and videos on the inserted memory devices
• Setting – See below 5.2 settings

About the default Screen:
There are two options for the default screen: Seaside and Blue. You can select the one you like as the default background. Please refer to the “Settings” menu for more information.

Settings

Navigate the settings menu using the 4-way navigation pad on the remote control or buttons on the back of the frame.

• Press ＜ or ＞ to select the sub-menu.
• Press or ok to step through sub-menu items.
• Press ＜ or ＞ to adjust the selected sub-menu item.
• Press to go back to previous menu when sub-menu settings finished

Slideshow Setup

Display Ratio

| Fit to screen
Full screen

Clock on Slideshow

| On
Off

Slide Interval

| Hours: 1 Hour
Minutes: 1-5-15-30
Seconds: 3-5-15-30
Slide Effect| Off
Random
Fly in
Chessboard
Cut
Erase
Louver
Random Line
Music| Off
On
Slide Mode| Single Window
Four Windows
Playback Mode| Random
Sequential
Slide Repeat| Sequential
Random

Music & Video Setup

Video Playback Order

| Sequential
All Repeat
Random
Random & Repeat
Single Repeat

Video Display Ratio

| Full screen
Fit to screen

Music Playback Order

| All Repeat
Random
Random & Repeat
Single Repeat
Sequential

Select EQ

| Off
Pop
Classic
Soft
Jazz
Rock

Date & Time Setup

24
Alarm Status| Set alarm on/off| Off
On
Alarm Time| Set alarm time| HH:MM

Alarm Repeat

| ****

Set alarm frequency

| Every day
Work days
Weekend
Once
Clock Mode| Analog clock face| Mode One
Analog clock face| Mode Two
Mode Three| Analog clock face with white background and sweet icons
Mode Four| Analog clock face with green and blue background
Mode Five| Digital watch face with black background
Mode Six| Digital calendar with black  background

System Setup

Language

|

Set language

| English, France, German, Spanish, Italian

Desk Background

| Set desk background photo| Seaside
Blue

Auto Power On & Off

|

Set auto power on/off frequency

| Once
Every day
Work days
Weekend
Off

Auto Power On

| Set auto power on time| HH:MM
Off

Auto Power Off

| Set auto power off time| HH:MM
Off

Motion Sensor

| Set motion sensor on/off| On
Off

Sleep Time

|

Sensor standby after

| Minutes 5-15-30-45
Hour 1-1.5

Start Up Mode

|

Digital Frame start from

| Photo
Photo & Music
Music
Video
Calendar
Off
Firmware Version|  |
Reset Default| Restore to factory settings

One Year Warranty

Full One Year Manufacturer’s Warranty
LOVCUBE warrants the product hardware components against defects in materials and workmanship when used in accordance with the company’s documentation for a period of one (1) YEAR after the date of original purchase from the company. If a hardware defective arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, Company will either

1. repair the hardware defect at no charge, using new or refurbished replacement parts
2. exchange the product with a new or manufactured from new or serviceable used parts and is at least functionally equivalent to the original product or
3. refund the purchase price of the product.
   We only cover warranty for purchase made within the USA, Canada, UK.

Warning
There is a risk of hardware damage. Never place the Digital Frame in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. Failure to do this, and subsequent damage to the frame will void your warranty.

Obtaining Warranty Service
Please access and review the online help resources referred to in the documentation accompanying this hardware product before requesting warranty service. If the product is still not functioning properly after making use of these resources, please contact our representatives at support@lovcube.com. No replacements will be sent out by the manufacturer until the returned item is received.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>