JRL Corporation Inc LED2024 Remote Control Instructions
- June 8, 2024
- JRL Corporation Inc
Table of Contents
JRL Corporation Inc LED2024 Remote Control
Specifications
- Remote Controller: RF Remote control
- Distance: Long distance
- Size: Mini
- Connection: Wire connection
- Power Supply Voltage: 5V – 24V
Product Usage Instructions
Functions Of Each Button
- ON/OFF: Turn the lights on or off
- AUTO: Enable automatic mode
- SPEED UP: Increase the speed of lighting effects
- SPEED DOWN : Decrease the speed of lighting effects
- MODE UP : Switch to the next lighting mode
- MODE DOWN: Switch to the previous lighting mode
- BRIGHTNESS UP: Increase brightness
- BRIGHTNESS DOWN : Decrease brightness
- COLOR UP: Switch to the next colour
- COLOR DOWN : Switch to the previous color RED, GREEN, BLUE, WHITE, YELLOW, CYAN, PURPLE: Directly select specific colors
Model Usage
Press the mode button to select the desired lighting movement model from
the following options:
- Multi-color lighting twinkles consistently
- Single colour lighting twinkles consistently (total 7 colors)
- Multi-color light moves consistently
- Single-color light moves consistently (total 7 single colors)
- Multi-color lighting moves discontinuously
- Single-color lighting moves discontinuously
Remote Operating Instructions
Remote Controller
RF Remote control, long distance, mini size, wire connection is simple and very easy to use;
- Functions Of Each Button:
- Usages
Receiving Controller
The receiver controller working voltage: 5V—24V-supply-voltage;
Cautions: Please make sure the power supply voltage matches your
controller before you power it.
Warning
- Always purchase the correct size and grade of battery most suitable for the intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device before battery installation.
- Ensure the batteries are installed correctly about polarity (and -).
- Remove batteries from equipment that is not to be used for an extended period.
- Remove used batteries promptly.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
FAQ
- Q: What should I do if the remote control is not working?
- A: Check the battery contacts for dirt or damage, replace batteries, and ensure proper polarity while installing new batteries.
- Q: How do I change the lighting color?
- A: Use the COLOR UP and COLOR DOWN buttons to cycle through available colors or directly select a specific color.